Gravity: Digital Blue LED Light - digital module with LED diode (blue)

The WS2813B PLCC-6 LED diode integrates an RGB chip and controller in a single 5050 package, supports a dual signal line with transmission continuity function, and a 24-bit color depth. Used in lighting installations, peripheral devices, and multimedia systems.

Module with replaceable LED diodes in 4 colors: red, green, blue and white. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020228

Kitronik 2766 is a yellow LED designed for use in e-textiles, allowing for easy integration of lighting effects into textile projects. With a built-in resistor and clearly marked polarity (+ and -), the LED is simple to use and safe to incorporate with conductive materials.

The Satellite Module 001 is an RGB LED module from macetech, containing ten 100 mA 5-chip wide-angle (140 degree) red, green, and blue LEDs. The module runs at 10 V, for a maximum power of 3 W, and it is connected in a common-anode configuration. Pololu 1243

8-segment display module, 4 digits with commas

Module with white LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0031-W

Module with yellow LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0031-Y

Flashlight module using a bright 5000 mCd white LED. Power is supplied by a 12 V N-type battery, which is included in the set. The flashlight is equipped with a slide switch for convenient switching on and off. Kitronik 2114

Module with red LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0021-R

Adafruit 2226

RGB Panel Shield is an extension in the form of shield overlays designed for Arduino. With its help it is possible to control the RGB 32x32 LED display (refresh 1: 8). Communication with the display takes place via a 2x8 connector. SparkFun SPX-14721

Module with flashing multi-color LED. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030014

LED display module with three LEDs in red, yellow and green. Perfect to be used as a traffic light

A module dedicated to projects related to traffic lights and pedestrian crossings. It is fully assembled, which eliminates the need for soldering. Thanks to the shape resembling a real traffic light and three LEDs powered directly from the micro:bit I/O pins, it allows easy programming and expansion of projects with additional traffic lights using radio communication, which allows for the study of traffic management in the city. Kitronik 5642

Adafruit 1612

Kitronik 2723 is a green LED designed for use in e-textiles, allowing for easy integration of lighting effects into textile projects. With a built-in resistor and clearly marked polarity (+ and -), the LED is simple to use and safe to incorporate with conductive materials.