LTR-559 Light & Proximity Sensor - module with light and proximity sensor

SEN-14351

AS7331 UV light sensor module. It allows you to measure UV radiation on three channels: UVA (320-400nm), UVB (280-320nm) and UVC (200-280nm). Communication with AS7331 takes place via the I2C interface and the Qwiic connector. SparkFun SEN-23518

Great way to upgrade a project that uses a photocell and needs RoHS compliance. Due to the high rejection ratio of infrared radiation, the spectral response of the ambient light sensor is close to that of human eyes. Adafruit 2748

The module allows the measurement of lighting in the vicinity of the sensor. The measuring range is from 1 to 65535 LUX, and communication takes place using the I2C bus. DFRobot SEN0097

Precise sensor measuring UV radiation in the range of 240 to 370 nm, directly outputting UV index value (0-11) and hazard level (1-5). Thanks to I2C and UART interface support and compact design, it is ideal for environmental monitoring, health protection and optimization of photovoltaic installations. DFRobot SEN0636

Module with an integrated proximity and ambient light sensor based on the VCNL4040 system. It can detect obstacles in the range of 0 to 20 cm. It communicates via the I2C bus. Adafruit 4161

SEN-14347

Photodiode Brightness Sensor Module, RoHS

Compact light sensor that provides precise measurement of both illuminance (10–10000 Lux) and correlated color temperature (2700K–6500K), with low measurement errors. Thanks to I2C and UART interfaces, the sensor easily integrates with platforms such as Arduino or Raspberry Pi, making it an ideal tool for photographers, filmmakers and projects requiring lighting control. DFRobot SEN0611

Precise solar radiation intensity sensor in the range from 400 to 1100 nm, communicating via Modbus-RTU (RS485) and resistant to harsh conditions thanks to the aluminum housing class IP67. High accuracy (±5%), fast response time (≤10 s) and resistance to dirt make it ideal for monitoring photovoltaics, environmental research and meteorology. DFRobot SEN0640

The XH-M131 module is a universal module that allows you to control devices with a current consumption of up to 10A depending on the light intensity, which makes it ideal as a twilight sensor for home or garage lighting. It is easy to operate with potentiometer light level adjustment, can be controlled by various 12V power sources and requires no soldering for easy installation. XH-M131

Light sensor module in the form of a photoresistor. A comparator and a potentiometer are placed on the board. The module has a digital output

Module with an ambient light sensor VEML6030 with a measuring range up to 120,000 lx. It enables light measurement with 16-bit resolution. I2C communication. SparkFun SEN-15436

A 5-channel flame detector module for detecting a flame over a larger area. Detects fire with 5 sensors that are placed on the module every 30 degrees. It has a digital and analog output. modFLAME-5CH

Color sensor equipped with the OPT4048 sensor from Texas Instruments. It allows you to determine the characteristics of ambient light by measuring parameters such as light intensity, color in the CIE XY, LUV coordinate systems, as well as color temperature. The module is equipped with Qwiic connectors. SparkFun SEN-22639

modTSL2561 is a module containing a light sensor TSL2561; communication with the system takes place using the I2C bus