![LoRa Radio Module - 433MHz radio module LoRa Radio Module - 433MHz radio module](https://kamami.pl/31588-large_default/lora-radio-module-433mhz-radio-module-tel0116.jpg)
![LoRa Radio Module - 433MHz radio module LoRa Radio Module - 433MHz radio module](https://kamami.pl/31588-large_default/lora-radio-module-433mhz-radio-module-tel0116.jpg)
zł185.98 tax excl.
LoRa radio module with 433 MHz operating frequency. Communication takes place via the UART serial interface. It is supplied with the voltage in the range from 3.4 to 5.5 V. DFRobot TEL0116
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
A radio module with an operating frequency of 433 MHz, based on the Semtech Sx1276 chip. It is an inexpensive transceiver module designed to work in unlicensed ISM and LPRD bands. It can work in two different modes: standard and network. In standard mode, it acts as a transparent radio modem that communicates with the host in the set data format without the need for encoding and decoding. In network mode, one module is configured as the central node and the rest are configured as node modules. Communication between the central module and the node point module is two-way, but the nodes cannot communicate with each other. It is supplied with the voltage in the range from 3.4 to 5.5 V, and communication takes place via the UART serial interface.
Radio module with operating frequency of 433 MHz. Communication takes place via the UART serial interface. It is supplied with the voltage in the range from 3.3 to 5 V. DFRobot TEL0114
Radio module with 868 MHz operating frequency. Communication takes place via the UART serial interface. It is supplied with the voltage in the range from 3.4 to 5.5 V. DFRobot TEL0115
The UART-USB converter built on the FTDI FT232RL chip. Compatible with 3.3V and 5V voltages. DFRobot DFR0065
Expansion board with LoRa E22-900T22S module for Raspberry Pi. Allows communication in the 868 MHz frequency band. Waveshare SX1262 868M LoRa HAT
Radio module with 868 MHz operating frequency. Communication takes place via the UART serial interface. It is supplied with the voltage in the range from 3.4 to 5.5 V. DFRobot TEL0115
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 868/915M LoRaWAN/GNSS HAT
Development board with LoRa Semtech SX1262 module and Apollo 3 Bluetooth 5 integrated in the NM180100 chip. It supports the 868 MHz and 915 MHz bands and Bluetooth Low Energy. It is compatible with the Qwicc system. SparkFun 17506
No product available!
Dragino LoRa Shield is an expansion board for Arduino (Uno, Leonardo, Mega, DUE) with a LoRa communication module (RFM98W system). Works at 433 MHz, maximum power up to 100 mW. In the set with the plate there is also an antenna. Seeed studio 113990194
No product available!
Converter with RS232 and RS485 industrial interface and LoRa wireless communication. It allows direct data transmission without the need to support an additional protocol. USR-LG206-H-P
No product available!
Adafruit Feather 32u4 RFM95 is a development board with built-in ATmega32u4 AVR microcontroller (8MHz, 32kB Flash, 2kB RAM) and RFM95W module enabling wireless communication in the 868 MHz or 915 MHz band. The board is compatible with Arduino IDE. Adafruit 3078
Function module designed for MicroMod boards. It allows you to add LoRa and LoRaWAN wireless communication in the 915 MHz frequency band to the project. SparkFun DEV-18573
IoT development kit with STM32WLE5JC chip that connects microcontroller with ARM Cortex-M4 core and LoRa SX126X module. It has all the pins of the LoRa-E5 module, I2C, SPI, UART, RS485 interfaces and an external antenna. Seeed Studio 113990934
A LoRa wireless communication module dedicated to long-distance data transfer. It operates in the 433 MHz frequency band and is equipped with a USB interface. Waveshare USB-TO-LoRa-LF
Module with LoRa transmitter based on RFM95 (SX1276 LoRa®). It works with a frequency of 433 MHz, maximum power up to 100 mW and a power gain of up to + 20dBm. The module has a built-in antenna, but it is possible to connect an external antenna (MHF connector). The module has a connector in accordance with the Grove standard. Seeed studio 113060007
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 868 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.1
Expansion board with LoRa E22-400T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1268 433M LoRa HAT
No product available!
Development kit with SAMD21G18 microcontroller with ARM Cortex M0 core and LoRa RFM95 868/915 MHz radio communication module. Adafruit 3178
Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1262 433/470M LoRaWAN HAT
LoRa module working at 868 MHz based on the SX1262 chip. It allows for the implementation of long-range wireless data transmission. Waveshare Core1262-868M
LoRa radio module with 433 MHz operating frequency. Communication takes place via the UART serial interface. It is supplied with the voltage in the range from 3.4 to 5.5 V. DFRobot TEL0116