 
        
           
        
          The module with 32 relays with a control voltage of 12 V and a load of up to 7 A and 8 GPIO pins that can work in the analog input mode. It allows the switching of high-power devices over the Ethernet interface and is controlled by the built-in, easy-to-use network interface or any popular terminal emulator that supports the TELNET protocol. Each module is shipped with a unique MAC address. These devices also support assigning and retrieving custom identification strings that can be used to distinguish individual devices when a large number of boards are connected to the same network. All outputs are available on screw terminals, which makes it easy to connect external devices. The module will be used in home automation projects, lighting systems and garden equipment. Full documentation is available on the product page.

Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Module with 16 24 V relays with a load of up to 7 A. The board communicates via the Ethernet interface. Numato Lab 16ETHRL001-24
 No product available!
Module with 32 24 V relays with a load of up to 7 A. The board communicates via the Ethernet interface. Numato Lab 32ETHRL001-24
 No product available!
Module with 8 relays with a voltage of 12 V and a load of up to 10 A. The board communicates via the Ethernet interface. Numato Lab 8ETHRL001
Module with 8 relays with a voltage of 24 V and a load of up to 10 A. The board communicates via the Ethernet interface. Numato Lab 8ETHRL001-24
 No product available!
Module with SSR M281 relay with a load of up to 1 A. The board is equipped with a Grove connector and is controlled by a digital input. Seeed Studio 101020603
Module with 5 A 250 VAC relay. DFRobot DFR0017
Module with 8 relays with a maximum switching current of 2 A. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP8025ADAM
The module with 4 relays is designed for the M5Stack sets. It allows you to control devices with an operating voltage of up to 250 V AC and a current of up to 10 A or a voltage of 28 V DC and a current of 10 A. M5Stack U097
Extension module compatible with Raspberry Pi. The board is equipped with three 24 V 2 A relays, three buffer inputs, three sink outputs and three analog inputs with a working range up to 24 V. Pimoroni PIM213
The module with the TPL5110 timer, which can generate a signal with an adjustable period from 100 ms to 2 h. It also works well as an external Watchdog Timer. Adafruit 3435
The module with 4 relays, designed to work with the micro:bit. It allows you to control devices with operating parameters up to 120VAC/2A or 24VDC/2A. SB Components 14118
Industrial module based on the ESP32-S3 microcontroller, which supports WiFi, Bluetooth and RS485 interface. Equipped with 6 high-power relays (up to 10A at 250VAC/30VDC), it allows for safe control of various devices and integration with industrial sensors via the Modbus protocol. The module supports popular programming environments such as Arduino and MicroPython, making it ideal for AIoT and remote monitoring applications. Waveshare ESP32-S3-Relay-6CH
16-channel PoE module with relays allowing you to connect your PC to other electronic circuits via the network. It does not need a separate cable for power and data transmission. It can be controlled via a simple web interface or Telnet. Numato Lab NLRP1002-A
 No product available!
Module with one 5 V relay with a maximum switching current of 10 A. It communicates via a USB interface and does not require additional power supply. Numato Lab NLRL1001-A
Module with 32 12 V relays with a maximum switching current of 7 A. It communicates via the USB interface. Numato Lab RL320001
Pololu 5425 offers silent, reliable operation when switching currents up to 10 A and voltages up to 30 V, providing galvanic isolation and full configurability of RC control parameters. The version without soldered connectors allows easy adaptation to individual mounting needs in RC and automation projects.
 No product available!
Module with 2 relays with a maximum switching current of 7 A. Equipped with the ATmega328P microcontroller, it can be programmed in the Arduino IDE. Numato Lab PRLY001
Module with 16 relays 12 V with a maximum switching current of 7 A. Numato Lab RL40003
 No product available!
This industrial relay module, powered by the Raspberry Pi RP2350B microcontroller, features six 10A 250VAC/30VDC relays and an isolated RS485 interface. It ensures safe and stable operation thanks to opto-isolation, power isolation, and surge protection. It supports programming in C/C++, MicroPython, and the Arduino IDE, and the 40-pin Pico HAT connector allows for easy expansion. Its robust DIN housing and 7–36V DC power supply make it ideal for industrial automation and IoT projects. Waveshare RP2350-Relay-6CH
 No product available!
Module with one 240V/2A relay controlled by 5V with a fuse triggered by a high state. modSSR-1CH-H
 
                    Module with 32 12 V relays with a load of up to 7 A. The board communicates via the Ethernet interface. Numato Lab 32ETHRL001