GPS module with L76K GNSS receiver. The chip can receive data from major positioning systems: GPS, GLONASS, Beidou (BDS) and QZSS. It features fast operation, high accuracy and low power consumption. The module has a 5-pin PH2.0 connector, and the board also features a socket with an MS621FE battery backing up voltage, which significantly speeds up the device's startup after a temporary power outage. The user can also connect an external antenna via the u.FL connector located on the board. Full documentation is available on the product page.

Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
No product available!
STM32 Nucleo-64 development board with STM32L476RGT6 MCU, supports Arduino and ST morpho connectivity
NUCLEO series starter kit equipped with the STM32G491RE microcontroller (512 kB Flash, Cortex-M4), with a built-in programmer-debugger ST-Link-V3E, equipped with connectors compatible with Arduino. STMicroelectronics NUCLEO-G491RE
L76K GNSS receiver module. It can receive data from GPS, GLONASS, BDS and QZSS systems. It uses a UART interface and offers an accuracy of up to 2 meters. Waveshare L76K GPS Module
Sequre M10-25Q is a compact GNSS module with a digital compass, optimized for use in drones and navigation systems. With support for multiple satellite systems and communication protocols, precise navigation, and flexible mounting options, the module offers a reliable solution for location- and orientation-focused projects.
Industrial 4G module with Qualcomm SIM7600E-H chip. It allows you to connect devices with USB or UART communication with 4G networks. Waveshare SIM7600E-H 4G DONGLE
No product available!
GNSS receiver module dedicated to Raspberry Pi minicomputers. It provides simultaneous reception of GPS and GLONASS satellite systems. Waveshare MAX-7Q GNSS HAT
No product available!
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 868/915M LoRaWAN/GNSS HAT
No product available!
Module with a GPS receiver based on the MTK3333 system. Dedicated to Feather plates, communicates via the UART interface. Adafruit 3133
66 channel GPS receiver module LS20031. It communicates via the UART TTL interface with a refresh rate of up to 10 Hz. Pololu 2138
No product available!
Introducing Adafruit FONA 808 GSM + GPS Shield, an all-in-one cellular phone module with that lets you add location-tracking, voice, text, SMS and data to your project, in Arduino shield format for easy use. Adafruit 2636
No product available!
GPS module with GNSS receiver ZED-F9T. It supports L1 / L2 / E5b bands and provides clocking accuracy of up to five nanoseconds. Qwiic connector. SparkFun GPS-18774
No product available!
A spare parts kit for RTK Facet and RTK Facet L-Band that includes a front display PCB, a new button module, and a replacement cable. SparkFun SPX-24705
No product available!
Module with SIM868 designed for GSM, GPRS communication and GNSS positioning. It can communicate within the Bluetooth 3.0 standard. Waveshare Pico-SIM868-GSM/GPRS/GNSS
GPS module with GNSS receiver ZED-F9P. It can receive data from GPS, GLONASS, Galileo and BeiDou systems. It has USB, UART, I2C and SPI interfaces. RTK and high accuracy up to 10 mm. SparkFun GPS-15136
No product available!
GPS module with GNSS L76X receiver. It can receive data from GPS, BDS and QZSS systems. It uses the UART interface and offers an accuracy of up to 2.5 m. Waveshare L76X GPS HAT
Small GPS location module with L80-39 GPS chip, USB and TTL two ports,easy to be used with Raspberry Pi, Arduino, STM32 and other kind of micrcontrollers. The GPS module uses NMEA0183 communication protocol, integrated ultra-small SMA antenna connector. DFRobot TEL0119
No product available!
A GNSS module that combines the precise u-blox ZED-F9P receiver with the NEO-D9S L-band GNSS correction data receiver. Provides high-accuracy positioning without the need for separate RTK or NTRIP corrections. SparkFun GPS-22560
No product available!
L76K GNSS receiver module. It can receive data from GPS, GLONASS, BDS and QZSS systems. It uses a UART interface and offers an accuracy of up to 2 meters. Waveshare L76K GPS Module