Categories

Kamami.pl - Official Raspberry Pi distributor

New products



GPS Breakout - GPS module with NEO-M9N chip (U.FL antenna connector)

GPS module with NEO-M9N 92-channel GNSS receiver. The system can receive data from all major positioning systems: GPS, GLONASS, Galileo and BeiDou. It has UART, I2C and SPI interfaces. SparkFun GPS-15712

More details

ID: 581397

65,01€ gross (23% VAT)
52,85€ net

Add to wishlist

More info

Description

GPS module with NEO-M9N 92-channel GNSS receiver. The system can receive data from all major positioning systems: GPS, GLONASS, Galileo and BeiDou. Determining the position with the help of the module allows to achieve an accuracy of up to 1.5 m. The NEO-M9N module detects jamming and forgery events. In addition, it is equipped with a SAW (Surface Acoustic Wave) filter, which, in combination with LNA (Low Noise Amplifier), enables normal operation even with strong signal interference.

The module has a Qwiic connector with an I2C interface. Additionally, for users who do not work with the Qwiic system, UART, I2C and SPI interfaces were provided on pins with a 2.54 mm raster. There is also a socket on the board with a battery supporting the voltage, which significantly accelerates the start of the device after a momentary power failure.

The module is configured via a USB connector and a dedicated u-center application. The module is also available with the Arduino library with numerous examples of use.

Attention!
For the proper operation of the module, an external antenna with a U.FL connector is required, which is not included in the set.

Features

  • Integrated U.FL connector (antenna not included)
  • 92-channel GNSS receiver
  • Accuracy 1.5 m
  • Maximum update rate 25 Hz
  • Start-up time: 24s (cold start), 2s (hot start)
  • Maximum altitude: 80,000 m
  • Max G: ≤4
  • Maximum speed: 500 m / s
  • Speed accuracy: 0.05 m / s
  • Course accuracy: 0.3 degrees
  • Timing Pulse Accuracy: 30 ns
  • External interrupt
  • Pin check
  • Low power consumption mode
  • Supports NMEA, UBX and RTCM protocols via UART or I2C interfaces
  • Voltage: 3.3V VCC
  • Current consumption: 31 mA

Downloads

Manufacturer

Accessories