ItsyBitsy nRF52840 Express development kit with nRF52840 microcontroller
ID: 1185234
5906623431687
zł108.30
Tax included
zł88.05 tax excl.
Development kit with nRF52840 microcontroller with ARM Cortex M4F core and 2 MB external QSPI memory. It has built-in BLE communication. It can be programmed using the Arduino IDE or CircuitPython. Adafruit 45481
Description
A development kit with a Bluetooth Low Energy module based on Nordic Semiconductor's nRF52840 microcontroller. The chip is equipped with 1 MB of Flash memory and 256 kB of RAM and can operate at up to 64 MHz. In addition, the board features a 2 MB QSPI Flash memory, which can store CircuitPython code and additional data.
Among the interfaces available on the board's connector, the user will find six analogue inputs with 12-bit resolution, 12 PWM outputs available on GPIO pins, and I2C, UART, SPI and I2S interfaces. In addition, the user has an RGB mini DotStar LED and a red LED available.
The module offers a variety of power supply methods, including via the USB connector or via the BAT pin, which is a 3.5 to 6 V power supply using a LiPo battery. The built-in 3.3 V voltage stabiliser not only provides voltage to the components on the board, but also allows external circuits to be powered via the 3 V pin, which is controlled by an En or Vhi input connected directly to BAT and USB.
The Feather nRF52840 Sense can be programmed using the Nordic SDK environment, the Arduino IDE and using CircuitPython. Full documentation along with numerous examples are available on the product page.
Features
- ARM Cortex M4F (with FPU) running at 64 MHz
- 1 MB flash memory and 256 KB SRAM
- 2 MB external QSPI flash memory
- Native USB interface support
- 2.4 GHz radio communication compatible with Bluetooth Low Energy technology
- FCC/IC/TELEC certified module
- Up to +8dBm output power
- 21 GPIO, 6 x 12-bit ADC, up to 12 PWM outputs (3 PWM modules with 4 outputs each)
- UART, I2C, SPI and I2S interface
- Red general purpose LED
- DotStar RGB LED
- Vhigh pin for power supply from BAT or USB
- Power on/off pin
- Reset and user button
- Built-in UF2 bootloader
- Dimensions: 36 x 17.6 x 5.6 mm
Kit contains
- ItsyBitsy nRF52840 Express
- 2 x male 16-pin goldpin connector
1185234
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
This little PCB sits on top of the Pro Trinket and allows a LiPoly/LiIon battery to plug in. When the Pro Trinket USB port is powered, the battery is recharged automatically. Adafruit 2124
zł25.30
24h
Available quantity: 3
Available
Development kit with nRF52840 microcontroller with ARM Cortex M4F core and BLE communication. Equipped with motion sensors, magnetometer, light, humidity, pressure sensors and a microphone. Adafruit 4516
zł245.41
Delivery date unknown
No product available!
Other products in the same category (16)
Module with nRF52840 microcontroller with ARM Cortex M4F core and Bluetooth 5.0 communication. Waveshare Core52840
zł72.84
24h
Available quantity: 1
Available
The nRF9161 DK Development Kit is an affordable, pre-certified kit designed for evaluating and developing IoT applications with support for LTE-M, NB-IoT, GNSS, and DECT NR+. With a wide range of supported LTE bands and software support, it is ideal for engineers and developers working on IoT projects. Nordic Semiconductors NRF9161-DK
zł602.01
24h
Available quantity: 1
Available
Development kit with nRF52832 microcontroller with ARM Cortex M4F core. Equipped with 512KB Flash and 64KB SRAM, it can support Bluetooth (BLE) communication. Adafruit 3406
zł125.28
4 weeks
No product available!
nRF52 DK is a development board based on the nRF52832 system with Bluetooth Low Energy (BLE) and 2.4 GHz connectivity. The module has a connector compatible with Arduino shields, a connector for connecting an external antenna for NFC, buttons and diodes available to the user
zł299.00
24h
Available quantity: 3
Available
A set with a development board with the nRF51822 chip, designed for learning programming for pupils and students. It is a more extensive alternative to micro:bit educational modules. DFRrobot DFR0840
zł374.38
4 weeks
No product available!
Development kit with the nRF5340 Bluetooth 5.2 SoC chip, which supports BLE, BT mesh, NFC, Thread and Zigbee protocols. Nordic Semiconductor nRF5340-DK
zł323.69
24h
Available quantity: 2
Available
Development kit with nRF52840 microcontroller with ARM Cortex M4F core and BLE communication. Equipped with motion sensors and a microphone. Seeed Studio 102010469
zł79.11
4 weeks
No product available!
Starter kit with nRF52840-MDK evaluation board and Grove modules designed for the development of Mesh networks. Seeed Studio 110061007
zł453.22
24h
Available quantity: 1
Available
Development kit with nRF51822 microcontroller and GSM/GPRS MT6260 chip. Dedicated to the construction of "wearable" devices and IoT devices. DFRobot DFR0383
zł209.86
24h
Available quantity: 1
Available
Development kit with nRF52840 microcontroller with ARM Cortex M4F core and Bluetooth (BLE) 5.0 communication. Seeed Studio 102010448
zł47.90
4 weeks
No product available!
Evaluation board with nRF52840 microcontroller and bluetooth communication. Equipped with motion, temperature, light, sound sensors and RGB diode. Compatible with micro: bit modules. Adafruit 4500
zł255.64
24h
Available quantity: 2
Available
A module dedicated to power analysis of nRF5 series development boards. It is designed to measure and optimize power consumption in embedded device applications. Nordic Semiconductor nRF6707
zł529.01
24h
Available quantity: 1
Available
Development kit intended for creating Bluetooth Low Energy, Bluetooth mesh, Thread, Zigbee, 802.15.4, ANT applications. It has a built-in SEGGER J-Link debugger enabling programming and debugging. Nordic Semiconductor nRF52840-DK
zł309.90
24h
Available quantity: 1
Available
A compact and powerful IoT prototyping platform based on the dual-core nRF5340 (Arm Cortex-M33) chip, which allows you to run machine learning (ML) models directly on the device. With the nRF Edge Impulse app, users can wirelessly transmit sensor data, train ML models in the cloud, and deploy them back. Support for Bluetooth LE, mesh, Thread, Zigbee, and Matter protocols makes the Thingy:53 ideal for smart home systems. The device is equipped with numerous sensors (temperature, humidity, air quality, light, microphone, accelerometer), a USB-C rechargeable Li-Po battery, and a Grove/Qwiic/Stemma-compatible JST connector, providing great flexibility for prototyping and demonstrations. Nordic Thingy:53
zł350.32
24h
Available quantity: 1
Available
USB module supporting Bluetooth 5.3, Bluetooth mesh, Thread, Zigbee, 802.15.4, ANT and 2.4 GHz protocols. It is an ideal target device for use with the nRF Connect for Desktop application. Nordic Semiconductor nRF52840 Dongle
zł69.90
24h
Available quantity: 6
Available
Development kit with nRF9160 microcontroller with ARM Cortex M33 core. Equipped with 1MB Flash and 256KB RAM, it can support CAT M1 LTE and NB-IoT cellular communication. SparkFun WRL-17354
zł1,013.38
3 weeks
No product available!
Development kit with nRF52840 microcontroller with ARM Cortex M4F core and 2 MB external QSPI memory. It has built-in BLE communication. It can be programmed using the Arduino IDE or CircuitPython. Adafruit 45481