New products
New products New products
Available
zł73.14
24h
Available
zł1,049.01
24h
Available
RTC module Pico DS3231 for Raspberry Pi Pico - Waveshare 19426
ID: 584092
5906623425358
zł37.16
Tax included
zł30.21 tax excl.
Module with a precise clock RTC DS3231. Communication via the I2C interface. Waveshare Pico-RTC-DS3231
Description
Module with a precise real time clock (RTC) DS3231 designed to work with the Raspberry Pi Pico. The clock counts seconds, minutes, hours, day of the month, month, day of the week and year with leap year compensation up to 2100. It can work in 24-hour or 12-hour format with AM/PM indicator and has built-in two programmable alarms. The module is powered with the voltage from 2.3 V to 5.5 V and has extended pins, so it can be stacked. Communication takes place via the I2C interface. Full documentation with examples is available on the product wiki page.
Pinout description
Features
- Counts seconds, minutes, hours, day of the month, month, day of the week, and year with leap year compensation up to 2100
- It can work in 24-hour or 12-hour format with AM/PM ratio
- Built-in two programmable alarms
- Backup battery holder
- Voltage: 2.3 to 5.5V
- Current consumption: 100 nA
- Dimensions: 52 x 21 mm
584092
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł19.31
24h
Available quantity: 699
Available
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Version with soldered connectors. Raspberry Pi SC0917
zł23.90
24h
Available quantity: 75
Available
Other products in the same category (16)
A set of goldpin male connectors intended for Raspberry Pi Pico boards. The set includes two 20-pin strips and one 3-pin strip with a pitch of 2.54 mm. Soldered connectors enable easy connection of expansion modules and other accessories
zł1.89
24h
Available quantity: 92
Available
Monochrome VGA camera module with HM0360 sensor working with Raspberry Pi Pico. It uses 1 bit video interface and I2C to configure the registers. ArduCAM B0319
zł113.95
24h
Available quantity: 2
Available
Module with 4-digit 8-segment LED display. Communication via the SPI interface. Waveshare Pico-8SEG-LED
zł14.37
24h
Available quantity: 4
Available
Module with BME688 chip and BH1745 color and light intensity sensor equipped with Raspberry Pi Pico W. Accessories included. Pimoroni PIM638
zł233.07
24h
Available quantity: 2
Available
Uninterruptible power supply module for Raspberry Pi Pico, which allows you to continue work and safely shut down the microcomputer after a power failure. Waveshare Pico-UPS-A-EN
zł52.87
24h
Available quantity: 4
Available
Module for building a weather station equipped with a controller based on Raspberry Pi Pico W. Pimoroni PIM628
zł222.00
4 weeks
No product available!
Board with prototype holes dedicated to Raspberry Pi Pico. It offers an 8x20 hole area with a pitch of 2.54 mm with marked pin labels and a reset button and STEMMA QT connector. Adafruit 5200
zł10.90
24h
Available quantity: 2
Available
The Raspberry Pi Debug Probe is an affordable tool that combines a USB-UART debugger and converter. Includes the necessary hardware and wiring needed to quickly debug the Raspberry Pi Pico, RP2040 microcontrollers, and other ARM Cortex-based MCUs. Raspberry Pi SC0889
zł58.90
24h
Available quantity: 24
Available
Module with PMSA003 air quality sensor and BME280 pressure sensor designed for Raspberry Pi Pico. It is equipped with WiFi ESP8266 communication. SB Components 22342
zł284.79
24h
Available quantity: 2
Available
The KamodRPI Pico Safe Relay is an add-on board for Raspberry Pi Pico featuring four SPDT relays with galvanic isolation, optoisolated digital inputs, and LEDs indicating input and output states. The module is ideal for applications in building automation, robotics, and education, powered via micro USB or USB-C with automatic source selection.
zł70.92
24h
Available quantity: 129
Available
Extension module with a Raspberry Pi Pico W board with WiFi communication. The set is equipped with relays, buffer inputs, sink type outputs and analog inputs. Pimoroni PIM632
zł189.27
24h
Available quantity: 2
Available
Kit for controlling soil moisture of cultivated plants. Equipped with a Raspberry Pi Pico W-based controller and soil moisture sensors with wires. Pimoroni PIM627
zł287.33
4 weeks
No product available!
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes and two areas of 8x20 holes with a pitch of 2.54 mm with marked pin labels. SB Components 21505
zł20.61
24h
Available quantity: 2
Available
The servo control module is designed for the Raspberry Pi Pico. It uses the PWM pins of the microcontroller and has 16 3-pin connectors compatible with the interface used in the servos. Waveshare Pico-Servo-Driver
zł40.48
24h
Available quantity: 5
Available
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes with a 2.54 mm pitch with marked pins. SB Components 21499
zł19.46
24h
Available quantity: 5
Available
Module with environmental sensors designed for Raspberry Pi Pico. It allows you to measure temperature, humidity, pressure, illuminance, detection of VOC, IR and UV radiation and orientation. Waveshare Pico-Environment-Sensor
zł163.90
24h
Available quantity: 4
Available
Module with a precise clock RTC DS3231. Communication via the I2C interface. Waveshare Pico-RTC-DS3231