- Out-of-Stock
MYD-LPC4357 Development Board
ID: 209276
MYD-LPC4357 Development Board, MYIR
The MYD-LPC4357 development board is a full-function evaluation platform base NXP LPC4357 ARM Cortex-M4 processor working at 204MHZ; The MYD-LPC4357 board integrate all core components, memory, interfaces and attested software, which prototype base it. The board help users to make the NXP LPC4357 ARM Cortex-M4 / M0 processor.
The MYD-LPC4357 board deliver a rich set of memory and periphery interfaces, include 32MB SDRAM, 2MB NorFlash and 4MB SPI FLASH, Hi-speed USB Host / Otg, audio input / output, 10 / 100Mbps Ethernet, CAN, JTAG, 4.3 '' /7.0 '' TFT LCD Module, UART, MicroSD and user GPIO pins. These peripheries interfaces and user interface are working with the full-tested protocols base NXP LPC4350 / 4357 ARM Cortex-M4 processor at a fast period.
The LPC4350 / 4357 is NXP new released asymmetrical dual-core digital signal controller architecture, featuring ARM® Cortex ™ -M4 and Cortex-M0 processors, delivering the benefits of developing DSP and MCU applications within a single architecture and development environment. Cover on LPC4350 / 4357's features and advantages, MYD-LPC435X Development board enables customers to develop a wide range of applications such as motor control, power management, industrial automation, robotics, medical, automotive accessories, and embedded audio.
MYD-LPC4357 development board specifications
- PCB Size: 115mm x 90mm
- PCB layers: 4
- Power supply: 5V / 2A
- Debug interface: 20-pin, 2.54mm JTAG connector
- Working temperature -40 ~ + 85 ° C
- ROHS Compliance
Hardware resource
Processor
- LPC4357FET256, Cortext-M4, Cortext-M0 dual-core, working at 204MHZ
- 204 MHz, 32-bit ARM Cortex-M4
- 204 MHz, 32-bit ARM Cortex-M0 asymmetrical coprocessor
- 200 kB SRAM for code and data use
- 64 kB ROM including boot code and on-chip software drivers
- 32/128-bit One-Time Programmable (OTP) memory for general-purpose use.
External memory
- 32MB SDRAM
- 2MB NorFlash
- 4MB SPI FLASH
Audio interface
- Audio 3.5mm input
- Dual track audio 3.5mm output
TFT LCD
- 24 Bit color
- 80x272 pixel support 1024 x 768
Data interface
- 3 x UART (UART0, UART2 and UART3, UART2 need external MAX3232)
- 1x Hi-speed USB HOST
- 1x Mini USB OTG
- 1x Ethernet interface
- 2x CAN interface
- 1x RS485 (reuse with UART1)
LED
- 1x Power indicator
- 6x User LED
Download this file to MYD-LPC435X development board
To download
209276
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
MY-LCD70TP 7 touch LCD Module, MYIR
Regular pricezł715.31zł499.00
24h
Available quantity: 3
Available
Other products in the same category (16)
Dispensing needle for precise application of glue, flux with an internal diameter of 0.41mm and an external diameter of 0.69mm.
Retired
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.33mm and an external diameter of 0.6mm.
Retired
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.3mm and an external diameter of 0.55mm.
Retired
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.25mm and an external diameter of 0.5mm.
Retired
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.24mm and an external diameter of 0.45mm.
Retired
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.2mm and an external diameter of 0.4mm.
Retired
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.19mm and an external diameter of 0.35mm.
Retired
No product available!
Interactive robot construction kit. based on the ESP32-S module. It can be controlled from a mobile application available on devices with Android and iOS. Additionally, it can connect to a computer via WiFi network and be programmed in Scratch and Arduino IDE. ArduCAM K0075
Retired
No product available!
A network card that supports two WiFi frequency bands (2.4GHz and 5GHz) with a USB connector. It allows you to connect devices without an internal network adapter to the WiFi network. TP-LINK AC600
Retired
No product available!
Integrated capacitive fingerprint sensor communicating with the external system via the UART interface. The module has a rectangular sensor field and downloads a fingerprint image with a resolution of 508dpi. Waveshare UART Fingerprint Sensor (R)
Retired
No product available!
Sipeed MAIX Bit is a RISC-V 64 development board for AI + IoT applications. Seeed Studio 110991190
Retired
No product available!
Based on MAIX Module, the Maixduino is a RISC-V 64 development board for AI + IoT applications. Seeed Studio 110110044
Retired
No product available!
Module with 12.48" e-Paper display and 1304x984 px resolution. Communicates with external systems via the SPI interface. It has low power consumption and a wide viewing angle. Waveshare 12.48inch e-paper Module
Retired
No product available!
RoboClaw 2x60AHV Motor Controller (V7C) is a two-channel DC motor driver, operating voltage: 10,5 to 60V, maximum continuous current: 60A, the ability to easily implement feedback loops with PID controller, security systems. Pololu 3583
Retired
No product available!
Gate driver in uWiFi technology with extended range, with application for Android/iOS. BleBox GateBoxPro
Retired
No product available!
Camera module with MT9J003 sensor cooperating with ArduCam USB Shield. The maximum video resolution is 3856x2764 pixels. LS-18023 lens mount possible. ArduCam A0096
Retired
No product available!
MYD-LPC4357 Development Board, MYIR