- Out-of-Stock
ArduCAM 2MP OV2311 Global Shutter Mono NoIR Camera - camera with OV2311 sensor for Jetson Nano
ID: 586904
2 MPx camera module with OV2311 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M9 lens mount. Acrylic case included. ArduCAM B0220
Description
Monochrome camera module with a resolution of 1600x1300 with an OV2311 sensor designed for NVIDIA Jetson Nano minicomputers. It can be connected directly to the CSI-2 camera interface. The camera is equipped with a lens with a viewing angle of 55°. The sensor uses OmniPixel3-GS ™ technology to provide 8/10-bit full-frame, sub-sampled and windowed MIPI images and can operate at speeds up to 60 fps. The camera does not have an IR filter and is therefore sensitive to infrared light. The set includes an acrylic protective case.
Features
- Matrix: OV2311 (monochrome)
- Resolution: 1 Mpx (1600x1300 pixels)
- Optical Size: 1 / 2.9 inch
- Pixel size: 3 μm x 3 μm
- Sensitive to IR, no filter
- Focusing range: 30 mm to infinity
- Output interface: 2-lane MIPI CSI-2
- Output formats: 8/10-bit BW RAW
- FoV: 55° (H)
- Mounting: M9x0,25P
Kit contains
- Arducam OV2311 2 MP
- Arducam Adapter Board for Jetson Nano
- 150mm 15pin 1.0mm FPC cable
- 73mm 15pin 1.0mm to 22pin 0.5mm pitch FPC cable
- Acrylic case for the camera module
586904
Data sheet
- Resolution
- 2Mpx
- Interface
- MIPI CSI-2
- Sensor
- OV2311
- IR filter
- No
- Lens assembly
- M9
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
3D stereo camera module, which was built of two cameras with OV2311 sensor. Designed to work with Raspberry Pi, Jetson Nano and Xavier NX. ArduCAM B0264
zł1,161.45
Delivery date unknown
No product available!
2 MPx camera module with OV2311 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M12 lens mount. Acrylic housing included. ArduCAM B0221
zł514.83
24h
Available quantity: 1
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł975.01
24h
Available quantity: 1
Available
Other products in the same category (16)
1-channel module with a relay designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21277
Retired
No product available!
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets (one male and one female) of 2x20 pin strips. SB Components 20812
Retired
No product available!
Module with a three-dimensional LED matrix 4x4x4 (64 LED) dedicated to the Raspberry Pi Pico. It allows you to control each LED and obtain 3D lighting effects. SB Components 22663
Retired
No product available!
Bluetooth 5.1 module (BLE, SPP) designed to work with the Raspberry Pi Pico. It communicates via the UART interface using AT commands. Waveshare Pico-BLE
Retired
No product available!
A portable 65 W soldering iron has an adjustable operating temperature in the range from 100°C to 400°C. It can be powered by a 12-24 V adapter or a battery with an XT60 connector. The set includes a soldering iron and a D24 tip
Retired
No product available!
A portable 65 W soldering iron has an adjustable operating temperature in the range from 100°C to 400°C. It can be powered by a 12-24 V adapter or a battery with an XT60 connector. The set includes a soldering iron and a B2 tip
Retired
No product available!
Module with 4 LED displays (three LEDs in red, yellow and green) dedicated to the Raspberry Pi. Perfect for use as a traffic light. SB Components 06977
Retired
No product available!
6-channel module with relays, designed to work with the Raspberry Pi. It can switch 250VAC/7A or 30VDC/10A signals. SB Components 21802
Retired
No product available!
4-channel module with relays, designed to work with the Raspberry Pi. It can switch 250VAC/7A or 30VDC/10A signals. SB Components 06670
Retired
No product available!
The PCA9685 servo driver module is dedicated to Raspberry Pi minicomputers. It allows you to control 16 PWM channels. SB Components 08957
Retired
No product available!
The PCA9685 servo driver module is dedicated to micro: bit educational boards. It allows you to control 16 PWM channels. SB Components 09183
Retired
No product available!
Module with RFID reader. It is equipped with a buzzer and communicates via UART or USB interface. SB Components 20669
Retired
No product available!
Module with a differential pressure sensor based on the MPXV5010DP system. It uses a 22-bit ADC converter and measures the pressure between the two inlets up to 10 kPa. SB Components 20638
Retired
No product available!
USB-UART/I2C converter based on the MCP2221 chip. It enables communication of devices with UART or I2C interface with a computer. SB Components 21246
Retired
No product available!
The Murata LQM18DH6R8M70L is a high-quality 6.8 µH inductor supporting up to 330 mA current, ideal for compact applications such as DC/DC power supplies and mobile devices. It features low series resistance (ESR) and excellent stability for efficient operation, and its SMD 0603 package allows easy integration into modern electronics designs.
Retired
No product available!
The case is dedicated to the computing cluster based on the Raspberry Pi or Jetson Nano. Waveshare PI-CLUSTER-CASE
Retired
No product available!
2 MPx camera module with OV2311 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M9 lens mount. Acrylic case included. ArduCAM B0220