Main view
search
  • Main view
  • Front/back view
  • Side view
  • Set
ID: 1182356
zł1,849.94
Tax included

zł1,504.02 tax excl.

A multifunctional robot with a 2WD chassis and a controller in the form of a Raspberry Pi 4B minicomputer with 4GB RAM. It is a versatile mobile platform that can, for example, track a line or find and avoid obstacles. Waveshare AlphaBot2-Pi4B-4GB-EU

4 weeks
On request
Kamami is the official distributor of Waveshare displays, accessories and modules.

Description

AlphaBot2 is a kit for building a two-wheeled mobile robot based on a Raspberry Pi 4 model B minicomputer with a quad-core SoC (Broadcom BCM2711, Cortex-A72 core) running at 1.5 GHz, 4 GB of LPDDR4 RAM and Broadcom VideoCore VI graphics chip. The computer has a built-in WiFi network card (IEEE 802.11b/g/n/ac 2.4/5 GHz) and Bluetooth 5.0/BLE. In addition, the board includes: 2 USB 2.0 ports, 2 USB 3.0 ports, 40-pin GPIO connector (fully compatible with previous versions of the board), 2 microHDMI ports, Gigabit Ethernet (RJ45 socket), DSI connector (for display connection), CSI connector (for camera connection), microSD card connector and 4 mounting holes.

p1182349-Raspberry-Pi-4-Model-B-intro.jpg

The set can move both in an autonomous mode and be remotely controlled by a mobile application and Bluetooth interface, WiFi or an IR remote control.

Attention!

The kit does not include 14500 batteries. You must purchase them separately.

The set consists of two plates: the robot base with motors and an adapter plate. The base of the robot is equipped with connectors for connecting the ultrasonic sensor, line sensors, sensors to avoid obstacles and RGB LED. The board features a two-channel TB6612FNG motor driver, a potentiometer for adjusting the range of obstacle detection, a comparator and a basket for two 14500 batteries. To move, the base uses two N20 motors with a 30: 1 gear with wheels and two support balls.

1. AlphaBot2 interface connector 9. LM393                      
2. Ultrasonic sensor interface 10. Micro N20 motors        
3. Obstacle avoiding indicators 11. Wheels
4. Omni wheel 12. Power supply switch
5. ST188 13. 14500 battery holder
6. ITR20001/T 14. LED RGB
7. Potentiometer 15. Power supply indicator         
8. TB6612FNG

The adapter board is equipped with a Raspberry Pi connector, 5 V voltage stabilizer, PWM controller, ADC converter, joystick, IR receiver and buzzer. Servos controlling the movement of the camera are also connected to the adapter.

1. AlphaBot2-Base interface 7. PWM Controller PCA9685                    
2. Raspberry Pi interface 8. USB-UART CP2102            
3. Serwo interface                9. Joystick
4. USB to UART 10. IR Receiver
5. 5V LM2596 Regulator 11. Buzzer 
6. ADC Converter TLC1543  

The kit is easy to assemble, no soldering required. Full documentation is available on the product Wiki page.

Features

Raspberry Pi 4B

  • Processor: Broadcom BCM2711 (quad core, Cortex-A72 core (ARM v8) 64-bit SoC @ operating frequency up to 1.5 GHz
  • RAM memory: 4 GB (LPDDR4 SDRAM)
  • Wi-Fi module IEEE 802.11b/g/n/ac (2.4/5 GHz)
  • Bluetooth 5.0 module (Low Energy (BLE))
  • Gigabit Ethernet
  • 2 x USB 2.0 port
  • 2 x USB 3.0 port
  • 40-pin GPIO connector (fully compatible with previous PCB versions)
  • 2 x microHDMI port (supporting 4K @ 60FPS resolution (using a single screen, with the use of two screens, 4K @ 30FPS resolution is available)
  • MIPI DSI connector for display connection
  • MIPI CSI connector for connecting the camera
  • Slot for microSD memory card
  • Support for H.265 (4K @ 60FPS), H.264 (1080p @ 60FPS and 1080p @ 30FPS) codecs
  • Power supply: 5 V DC (power supply with a capacity of at least 3 A) or via GPIO pins (5V, 3A)
  • Possibility of power supply via PoE (Power over Ethernet)
  • Dimensions: 85 x 56 mm

AlphaBot2-Base

  • 5-channel infrared sensor, analog output
  • Built-in modules such as line tracking, obstacle avoidance
  • TB6612FNG - Dual H-bridge motor driver
  • N20 micro geared motor, with metal gears
  • Built-in RGB LEDs

AlphaBot2-Pi

  • Dedicated Raspberry Pi 3B/3B+/4B connector
  • 5V voltage stabilizer (LM2596)
  • TLC1543 ADC chip
  • PCA9685 - PWM control chip
  • Built-in buzzer
  • IR receiver
  • Joystick
  • MicroUSB connector

Kit contains

  • Raspberry Pi 4B 4GB
  • AlphaBot2-Pi (adapter plate)
  • AlphaBot2-Base (robot base)
  • RPi Camera (B)
  • Micro SD card
  • Power Supply
  • USB micro-B to USB Type-C cable
  • 2 x SG90 Servo
  • Set of 2 DOF for the camera
  • IR remote control
  • FC-20-pin cable 8 cm
  • MicroUSB cable
  • FFC 15-pin 25 cm cable
  • A set of screws
  • MicroSD card reader
  • Screwdriver
1182356

Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

You might also like

Other products in the same category (16)