CP503B - current probe for Micsig oscilloscopes
ID: 1182400
5906623481651
zł3,427.73
Tax included
zł2,786.77 tax excl.
Probe for measuring direct and alternating current up to 30 A. Works in the band up to 100 MHz, can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP1003B
Description
Probe for measuring DC and AC current up to 30 A. Uses standard BNC interface and can be connected to an oscilloscope or a multimeter. It works in the frequency band up to 100 MHz, has two measuring ranges: 6 and 30 A. The probe can work with manual or automatic regulation and is powered by a USB connector. It can be used in industry, automotive electronics, power supplies and inverters. Dedicated to Micsig devices.
Features
- Band: 100 MHz
- Rise Time: 3,5 ns
- Ranges: 6 A or 30 A
- Sensitivity: 1V/2A (6A), 1V/10A (30A)
- Accuracy:
- 1% ± 10 mA (6 A)
- 1% ± 50 mA (30 A)
- Signal delay: ＜ 30 ns (6 A), ＜ 30 ns (30 A)
- Measurement range:
- 20 mA to 6 Apk (6 A)
- 50 mA to 30 Apk (30 A)
- Maximum Measured Current: 30 Apk, 60 Apk-pk 21.21 Arms
- Noise: ≤1.4mA RMS (20MHz band, 30A, 10X range)
- Maximum working voltage: CAI 300V
- Maximum cable diameter: 5 mm
- Overload indicator: light
- Power supply: DC 5V, 3A
1182400
Data sheet
- Bandwidth
- 100 MHz
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A portable tablet oscilloscope with a 10.1 inch LCD display and a touch screen. It has four channels and has good measurement parameters: 300 MHz bandwidth, 2 GSa/s sampling rate and 220 Mpts memory buffer. Micsig TO3004
zł5,699.00
24h
Available quantity: 1
Available
Probe for measuring direct and alternating current up to 30 A. Works in the band up to 50 MHz, can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP503B
zł3,431.45
Delivery date unknown
No product available!
Other products in the same category (16)
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-1.5mm
zł47.90
24h
Available quantity: 4
Available
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 100 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP1500
zł1,151.14
4 weeks
No product available!
Rogowski-type current probe for precise measurements of alternating currents with a frequency of up to 30 MHz. Thanks to the flexible coil of 1.6 mm thickness and almost zero impedance introduced, it is ideal for work in hard-to-reach places of power systems. The integrated amplifier and BNC interface enable accurate measurements and easy integration with oscilloscopes, making it an ideal tool for R&D laboratories and power electronics services. Micsig RCP12000XS
zł5,043.00
4 weeks
No product available!
Micsig MDP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 300 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig MDP1503
zł3,906.17
24h
Available quantity: 2
Available
A probe tip with a 5000X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 1 GHz frequency band. Micsig OP5000-1G
zł5,146.47
4 weeks
No product available!
The housing for the DSO138 oscilloscope allows for easy storage and mobile use of the device. It protects the PCB and any microcircuits on it from dirt or accidental damage.
zł14.90
24h
Available quantity: 7
Available
BNC connector adapter cable for mini-grabber clips. Connects to Analog Discovery 2 via a BNC adapter. Digilent 240-136
zł47.95
24h
Available quantity: 1
Available
Probe for measuring direct and alternating current up to 100 A. It works in the 2,5 MHz band, it can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP2100B
zł2,143.69
4 weeks
No product available!
Test probe tip with 2000X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 350 MHz and 500 MHz frequency bands. Micsig OP2000-5
zł4,598.99
4 weeks
No product available!
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-2.3mm
zł47.90
24h
Available quantity: 4
Available
Oscilloscope probe designed for the analysis of signals generated by the ignition coil in automotive engines. It is compatible with most digital oscilloscopes. Hantek HT25
zł133.54
24h
Available quantity: 10
Available
Insulated fiber optic probe with a measuring range up to 2500 V. It works in the band up to 1 GHz, it can be connected to the oscilloscope via the BNC connector. Comes with a 10X attenuation tip. Micsig MOIP1000P
zł112,990.00
4 weeks
No product available!
Insulated fiber optic probe with a measuring range up to 2500 V. It works in the band up to 350 MHz, it can be connected to the oscilloscope via the BNC connector. Comes with a 10X attenuation tip. Micsig MOIP350P
zł49,999.00
4 weeks
No product available!
Probe for measuring direct current up to 800 A and alternating current up to 500 A. Operates at 5 kHz and can be connected to an oscilloscope via a BNC connector. Powered via USB. Hantek CC-800
zł635.00
4 weeks
No product available!
Universal oscilloscope probe with BNC connector. It has a voltage divider of 10:1 and offers a frequency response of 100 MHz. It allows measurements with a maximum voltage of up to 600 V. P6100
zł54.16
24h
Available quantity: 17
Available
The Micsig DP series differential probe is based on advanced metal shielding technology. It offers a 100 MHz frequency bandwidth and the ability to measure voltages up to 7000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP7000
zł4,199.00
4 weeks
No product available!
Probe for measuring direct and alternating current up to 30 A. Works in the band up to 100 MHz, can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP1003B