MOIP350P - isolated 350MHz fiber optic probe for Micsig oscilloscopes
ID: 1187016
zł49,999.00
Tax included
zł40,649.59 tax excl.
Insulated fiber optic probe with a measuring range up to 2500 V. It works in the band up to 350 MHz, it can be connected to the oscilloscope via the BNC connector. Comes with a 10X attenuation tip. Micsig MOIP350P
Description
An isolated fiber optic probe that works in the frequency band up to 350 MHz. It uses a standard BNC interface and can be connected to an oscilloscope or multimeter. Utilizing SigOFIT optical isolation technology, it offers high accuracy and excellent suppression of oscillations caused by high-frequency common-mode noise.
The probe has excellent amplitude-frequency characteristics and the DC gain accuracy is less than 1%. The maximum noise floor in this range is 1.41 mVrms and the zero drift is less than 500 μV. It is an excellent choice for the study of third generation semiconductors and devices based on SiC and GaN. The probe test leads are short and have an input capacitance of less than 3 pF when transmitted via coaxial cable, allowing for very safe testing.
Unlike traditional differential probes that can only test high-voltage signals, the SigOFIT can be used with a variety of tips to test differential mode signals from ±1.25 V to ±2500 V, achieving full output range and very high signal to ratio noise. It will be used in industry, automotive electronics, when servicing power supplies and inverters. It is dedicated to Micsig devices.
Features
- Bandwidth: 350MHz
- Rise time: 1 ns
- SMA input impedance: 1MΩ || 10pF
- Output voltage: ±1.25V
- Measuring ranges:
- 1X: ±1.25V
- 20X: ±25V
- 50X: ±62.5V
- 1000X: ±1250V
- 2000X: ±2500V
- Noise: <1.41mVrms
- Signal Delay: ＜15.42ns
- DC Gain Accuracy: 1%
- Common mode voltage range: 60kVpk
- Power: DC 5V, USB Type-C
- Cord length: 2m
Kit contains
- Probe
- USB Type-C cable
- Probe holder
- 25W USB charger
- 5 x MCX adapter with 2.54mm pitch
- 5 x MCX adapter with 5.05mm pitch
- MCX coaxial cable
- 20X and 1000X probe tip
- Case
1187016
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Test probe tip with 20X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 350 MHz and 500 MHz frequency bands. Micsig OP20-5
zł4,598.99
Delivery date unknown
No product available!
Test probe tip with 50X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 350 MHz and 500 MHz frequency bands. Micsig OP50-5
zł4,598.99
Delivery date unknown
No product available!
Test probe tip with 1000X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 350 MHz and 500 MHz frequency bands. Micsig OP1000-5
Product available on request. Please send your inquiry to the following address: sales@kamami.com
zł4,598.99
Delivery date unknown
No product available!
Test probe tip with 2000X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 350 MHz and 500 MHz frequency bands. Micsig OP2000-5
zł4,598.99
Delivery date unknown
No product available!
Other products in the same category (16)
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-1.5mm
zł47.90
4 weeks
No product available!
High-voltage differential probe. It has good measurement characteristics: a bandwidth of 50 MHz and an operating voltage of up to 1300 V. The probe has two attenuation coefficients: 50X and 500X. Hantek HT8050
zł938.99
24h
Available quantity: 1
Available
Test probe tip with 2000X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 350 MHz and 500 MHz frequency bands. Micsig OP2000-5
zł4,598.99
4 weeks
No product available!
Test probe tip with 1000X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 800 MHz and 1 GHz frequency band. Micsig OP1000-1G
zł6,599.00
4 weeks
No product available!
A set of needle probes used for piercing wire insulation. They can be used as pin probes when working with small PCBs or connectors. Hantek HT307
zł34.00
4 weeks
No product available!
A probe tip with attenuation factor of 5000X. Dedicated to Micsig probes from the SigOFIT series operating in the frequency band of 100MHz, 200MHz and 350MHz. Micsig OP5000-3
zł3,874.19
4 weeks
No product available!
Oscilloscope Probes (pair). 460-004
zł136.75
24h
Available quantity: 5
Available
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 200 MHz and the ability to measure voltage up to 3000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP3002
zł1,902.91
24h
Available quantity: 1
Available
Oscilloscope probe designed to analyze signals generated by the ignition coil in car engines. It is compatible with most digital oscilloscopes. Hantek HT25COP
Regular pricezł545.00zł399.00
24h
Available quantity: 3
Available
Micsig P130A is a reliable oscilloscope probe, ideal for precise measurements in high-voltage systems with a wide frequency range
zł150.05
24h
Available quantity: 3
Available
Universal oscilloscope probe with BNC plug and 10:1 voltage divider. It has a frequency range of 60 MHz and allows you to perform measurements with a maximum voltage of up to 600 V.
zł47.75
24h
Available quantity: 6
Available
Rogowski-type current probe for precise measurements of alternating currents with a frequency of up to 30 MHz. Thanks to the flexible coil of 1.6 mm thickness and almost zero impedance introduced, it is perfect for work in hard-to-reach places of power systems. The integrated amplifier and BNC interface enable accurate measurements and easy integration with oscilloscopes, making it an ideal tool for R&D laboratories and power electronics services. Micsig RCP60XS
zł4,182.00
4 weeks
No product available!
Rogowski-type current probe for precise measurements of alternating currents with a frequency of up to 30 MHz. Thanks to the flexible coil of 1.6 mm thickness and almost zero impedance introduced, it is ideal for work in hard-to-reach places of power systems. The integrated amplifier and BNC interface enable accurate measurements and easy integration with oscilloscopes, making it an ideal tool for R&D laboratories and power electronics services. Micsig RCP120XS
zł4,182.00
4 weeks
No product available!
Micsig MDP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 200 MHz and the ability to measure voltage up to 700 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP702
zł1,490.22
4 weeks
No product available!
The Hantek PP-250 is an oscilloscope probe with a bandwidth of 250 MHz, designed for precise high-frequency signal measurements. Equipped with a 1×/10× attenuation switch, it allows flexible adjustment for various measurement applications. Its ergonomic design and solid construction ensure comfortable use and long-lasting durability in everyday laboratory work.
zł99.90
24h
Available quantity: 6
Available
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 150 MHz and the ability to measure voltage up to 3000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP3001
zł1,499.04
24h
Available quantity: 1
Available
Insulated fiber optic probe with a measuring range up to 2500 V. It works in the band up to 350 MHz, it can be connected to the oscilloscope via the BNC connector. Comes with a 10X attenuation tip. Micsig MOIP350P