

€38.99 tax excl.
Evaluation kit with SiFive Freedom E310 RISC-V (ISA) microcontroller. It has 32MB QSPI flash memory, NXP K22 ARM Cortex-M4 for USB and JTAG, and a Qwiic and USB Type-C connector. SparkFun DEV-15799
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Evaluation kit with SiFive Freedom E310 microcontroller with RISC-V (ISA) architecture. The board contains the SiFive Freedom E310 core (works with a frequency of 150 MHz), 32 MB QSPI flash memory, NXP K22 ARM Cortex-M4 microcontroller for USB operation and as a JTAG interface and Qwiic connector. It is equipped with a USB Type-C connector. The SiFive Freedom E310 microcontroller offers a debug module, flexible clock generation with built-in oscillators and PLL, and a wide range of peripherals including UART, QSPI, PWM and timers. The kit is programmed using Freedom Studio or the Zephyr RTOS compilation environment (these environments do not yet have support in the form of Qwiic libraries). The board has dimensions and pin spacing compatible with Feather. There is a user guide on the product page.
Data sheet
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
No product available!
No product available!
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
The board is equipped with the STM32F405 microcontroller with the ARM Cortex-M4 core and SPI Flash memory, 20 GPIO pins, SD card slot, pins for connecting the battery with the charging and voltage stabilization circuit, JTAG connector and Qwiic socket. SparkFun DEV-17712
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripherals - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, SPI, UART, I2S and I2C. SparkFun WRL-20168
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-17381
No product available!
Development board in Feather format equipped with AW-CU488. The module has an integrated WiFi wireless communication controller, LiPo charging circuit and Qwiic connector. SparkFun DEV-19957
No product available!
Board with the DA16200 WiFi module. It is equipped with a Qwiic connector and is an excellent solution for IoT projects. SparkFun WRL-19696
A development board featuring the ESP32-C6 WROOM-1-N16 module from Espressif. It features a single-core RISC-V processor and a wide range of connectivity options, including 2.4 GHz WiFi 6, Bluetooth 5.3, Zigbee, and Thread (802.15.4). The module is Feather-compatible and provides 23 GPIO pins on 2.54 mm pitch connectors. SparkFun DEV-22924
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 16 MB of QSPI flash memory. The system can be programmed in C/C++ or microPython. SparkFun DEV-17745
Module with WiFi Espressif ESP32-S2 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, SPI, UART, I2S and I2C. SparkFun WRL-15663
Development board with LoRa Semtech SX1262 module and Apollo 3 Bluetooth 5 integrated in the NM180100 chip. It supports the 868 MHz and 915 MHz bands and Bluetooth Low Energy. It is compatible with the Qwicc system. SparkFun 17506
No product available!
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-15663
Development board based on the u-blox NORA-W306 module, offering dual-band WiFi and Bluetooth Low Energy. Equipped with a microcontroller with two Arm Cortex-M33 and Cortex-M23 cores, ideal for battery-powered IoT projects. It offers USB Type-C, microSD, JST for LiPo batteries, and 20 GPIO pins, supports a variety of communication interfaces, and allows easy integration with the Qwiic system and programming via Arduino IDE. SparkFun WRL-21637
A Thing Plus development board that combines the Matter protocol and the Qwiic SparkFun ecosystem to facilitate the prototyping of IoT devices. It uses the MGM240P module from Silicon Labs, which provides secure connectivity for both 802.15.4 with Mesh (Thread) and Bluetooth® Low Energy 5.3 protocols. SparkFun DEV-20270
Advanced IoT platform, equipped with ESP32 WROOM-S3 MINI module, supporting WiFi and Bluetooth, with 4MB Flash and 2MB PSRAM, and a microSD card slot. It offers 21 GPIO pins, support for UART, I2C and SPI interfaces, built-in USB Type-C connector and the ability to charge LiPo batteries, making it a versatile tool for developing projects. SparkFun WRL-24408
Development kit with XBee3 Micro radio module. Provides plug and play 802.15.4 2.4 GHz wireless connection (Zigbee 3.0 protocol). SparkFun WRL-15435
Development kit with nRF9160 microcontroller with ARM Cortex M33 core. Equipped with 1MB Flash and 256KB RAM, it can support CAT M1 LTE and NB-IoT cellular communication. SparkFun WRL-17354
No product available!
Development board with RP2040 microcontroller. Equipped with a microBUS connector, it can work with Qwiic expansion boards. SprakFun DEV-18721
Evaluation kit with SiFive Freedom E310 RISC-V (ISA) microcontroller. It has 32MB QSPI flash memory, NXP K22 ARM Cortex-M4 for USB and JTAG, and a Qwiic and USB Type-C connector. SparkFun DEV-15799