- New
SEQURE Blueson A1 6S 65A AM32 - ESC 6S 65A controller with AM32 software
ID: 1205247
zł146.67
Tax included
zł119.24 tax excl.
4-in-1 ESC for FPV drones, supporting 2-6S LiPo/LiHV voltage and up to 65A continuous current (120A peak current). Equipped with a 32-bit AT32F421 microcontroller and AM32 firmware, it provides smooth motor control with PWM in the 8-128 kHz range. It supports popular protocols such as DShot600, DShot300, Oneshot, Multishot, and PWM, and also offers telemetry functionality. SEQURE Blueson A1 6S 65A AM32
Description
SEQURE Blueson A1 6S 65A AM32 is an advanced 4-in-1 ESC designed for demanding FPV drone users and racing builds. Thanks to a high-quality PCB with increased copper thickness, the device provides excellent current conductivity and efficient heat dissipation. Combined with high-performance MOSFET transistors, this results in improved performance dynamics and stable operation even under heavy loads. The ESC enables smooth and precise motor control, which is crucial in racing and freestyle applications.
At the core of the system is a fast 32-bit AT32F421 processor, supporting dynamic PWM frequencies from 8 kHz to 128 kHz. This allows for very smooth throttle response and precise motor speed control. Support for popular protocols such as DShot600, DShot300, DShot150, Oneshot, Multishot, and PWM ensures compatibility with a wide range of flight controllers. Additionally, the ESC features telemetry, enabling real-time monitoring of operating parameters. The device supports a wide input voltage range of 2S to 6S LiPo/LiHV, increasing versatility across different drone configurations. The maximum continuous current is 65 A for 6S, while peak current can reach up to 120 A, making it suitable for high-power applications.
The design is optimized for easy installation thanks to the standard 20 × 20 mm mounting pattern, commonly used in racing drones. Large solder pads significantly simplify the installation of power and signal wires, which is appreciated by both beginners and advanced users. The compact design and low weight allow integration into lightweight FPV frames without increasing their load. SEQURE Blueson A1 is an excellent choice for users looking for a powerful, reliable, and versatile ESC that ensures high stability during flight.
Features
- Controller: AT32F421
- Firmware: AM32
- PWM frequency: 8 kHz – 128 kHz
- Operating voltage: 2–6S LiPo / LiHV
- Continuous current: 65 A (6S)
- Peak current: 120 A (6S)
- Supported protocols: DShot600 / DShot300 / DShot150 / Oneshot / Multishot / PWM
- Telemetry
- Galvanometer
- Mounting hole spacing: 20 × 20 mm, Φ4 mm / M3
- Dimensions: 42.5 × 36 × 7 mm
- Weight: 19 g
Kit contains
- SEQURE Blueson A1 4IN1 ESC
- 30AWG 40 mm SH1.0-8P cable (double-sided)
- 30AWG 60 mm SH1.0-8P cable
- 12AWG power wires 100 mm (black/red)
- XT60H-M connector (male)
- 35V 680 µF capacitor
- 5 × M3 × 8 mm damping grommets
1205247
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Two-channel ESC controller for brushed motors. It can deliver 40 A and has wires terminated with an XT60 connector
zł92.50
24h
Available quantity: 2
Available
ESC type controller for a DC motor with a supply voltage of 3.7 V to 5 V. It offers a maximum output current of up to 1.5 A and allows you to control two motors independently
zł60.61
4 weeks
No product available!
Miniature ESC type controller for a DC motor with an input from 3.7 V to 5 V. Offers an additional output current of up to 1.5 A and allows you to control the motor in a channel mixing device
zł64.64
24h
Available quantity: 1
Available
An advanced speed controller designed to power three-phase brushless motors in various applications, such as driving robots, walking robots or gimbals. Supports input voltage range from 12V to 56V. Maximum constant current is 60A. Makerbase ODrive-S
zł293.93
24h
Available quantity: 10
Available
The ODrive3.6 ESC speed controller is designed to power two three-phase brushless motors in various applications, such as driving robots, walking robots or gimbals. Supports input voltage range from 12 V to 56 V and maximum current up to 60 A. Makerbase ODrive3.6
zł412.21
4 weeks
No product available!
Set with ODrive3.6 ESC speed controller and MKS X2212 BLDC motor. The controller is designed to power two three-phase brushless motors in various applications, such as driving robots, walking robots or gimbals. Supports input voltage range from 12 V to 56 V and maximum current up to 60 A. Makerbase ODrive3.6 Kit
zł640.22
24h
Available quantity: 2
Available
A speed controller based on the open VESC standard, designed for electric skateboards, scooters, and e-bikes. It supports voltages from 14 to 75 V and continuous currents up to 100 A, offering various BLDC motor control modes, and a wide range of interfaces (PPM, UART, I2C, USB-C, CAN). Its compact design and extensive security features ensure reliability, flexible configuration, and convenient integration with computers and smartphones. Makerbase VESC 75100
zł531.68
4 weeks
No product available!
This speed controller is designed for high voltage and high current applications, ideal for electric vehicles, e-foils, and robotics. It supports voltages up to 84 V and continuous currents up to 200 A. Its ARM Cortex-M4 STM32F405RG processor ensures precise control and fast signal processing. It supports various control modes, works with BLDC and DC motors in both sensored and sensorless versions, and is configured via USB or Bluetooth using the VESC Tool. Makerbase VESC 75200 V2
zł776.23
4 weeks
No product available!
An advanced speed controller designed to power three-phase brushless motors in a variety of applications such as electric scooters, electric skateboards and electric bicycles. It supports an input voltage range of 8 V to 60 V, which corresponds to 3S to 13S for LiPo batteries, and a maximum current of up to 50 A. Makerbase VESC MINI 6.7 Pro
zł422.58
4 weeks
No product available!
2-channel brush motor controller module with PWM signal mixing function. It allows you to control two DC motors with a current consumption of up to 5 A per channel
zł45.02
24h
Available quantity: 1
Available
3-channel brush motor controller module with PWM signal mixing function. It allows you to control three DC motors with a current consumption of up to 15 A per channel
zł96.96
24h
Available quantity: 4
Available
3-channel brush motor controller module with PWM signal mixing function. It allows you to control three DC motors with a current consumption of up to 3 A per channel
zł53.53
4 weeks
No product available!
ESC controller module for a brushless motor with a current capacity of up to 40 A. It can work with LiPo packages from 3S to 6S. Uses BLHeli_32 software. Skystars Talon32
zł78.14
24h
Available quantity: 4
Available
ESC controller module for a brushless motor with a current capacity of up to 120 A. It can work with LiPo packs from 5S to 12S. Uses BLHeli_32 software. FLYCOLOR X-CROSS HV
zł538.99
24h
Available quantity: 1
Available
ESC controller module for a brushless motor with a current capacity of up to 80 A. It can work with LiPo packs from 5S to 12S. Uses BLHeli_32 software. FLYCOLOR X-CROSS HV
zł445.74
4 weeks
No product available!
Programming module for AM32 and BLS32 series ESC controllers. It allows you to easily update the controller software via the USB Type-C connector. RhinoESC Crawler
zł30.57
4 weeks
No product available!
4-in-1 ESC for FPV drones, supporting 2-6S LiPo/LiHV voltage and up to 65A continuous current (120A peak current). Equipped with a 32-bit AT32F421 microcontroller and AM32 firmware, it provides smooth motor control with PWM in the 8-128 kHz range. It supports popular protocols such as DShot600, DShot300, Oneshot, Multishot, and PWM, and also offers telemetry functionality. SEQURE Blueson A1 6S 65A AM32