Small Stepper Motor - 12V bipolar stepper motor
ID: 202854
5906623417056
zł81.66
Tax included
zł66.39 tax excl.
Bipolar stepper motor powered with a voltage of up to 12 V and a maximum current of 400 mA. SparkFun ROB-10551
Description
Bipolar stepper motor powered with a voltage of up to 12 V and a maximum current of 400 mA. It has an output shaft with a diameter of 3 mm and a torque of up to 100 g/cm. When using a current limiting controller, a 12 V supply voltage can be used with a current limitation of 400 mA. If a driver without current limitation is used, the input voltage must be lowered to keep the motor current below 400 mA.
Features
- Step angle: 7.5 degrees
- 2-phase bipolar motor
- Rated voltage: 12V
- Rated current: 400 mA
- Drive shaft with a diameter of 3 mm
- 4-wire cable
- Torque: 100 g/cm
202854
Data sheet
- Shaft diameter
- 3 mm
- Resolution
- 48 kroków/obr
- Torque
- 100 g-cm
- Coil resistance
- 4 Ω
- Coil current
- 400 mA
- Inductance of the coil
- 3,5 mH
- Voltage
- 12 V
- Weight
- 61,1 g
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The ULN2003A system consists of seven Darlington chips, housed in a DIP16 housing.
zł1.40
Delivery date unknown
No product available!
DRV8825 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2982
zł71.91
24h
Available quantity: 1
Available
The stepper motor driver with Allegro A4988 (A4988 Stepper Motor Driver Carrier) allows you to supply a bipolar current of up to 2A per phase. The system can be supplied with voltage up to 35V, in the set there is a heat sink. It is compatible with Polol 1182
zł5.20
24h
Available quantity: 13
Available
Other products in the same category (16)
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 4.5 V, and draws a current of 2 A per coil. Pololu 1475
zł412.14
4 weeks
No product available!
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 7.4 V, and has a current consumption of 1 A per coil. Pololu 1472
zł390.51
4 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 2.5 V, and draws a current of 2.8 A per coil. Pololu 1474
zł390.51
4 weeks
No product available!
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 3.6V, and draws a current of 2A per coil. Pololu 1473
zł376.42
4 weeks
No product available!
This NEMA 17-size hybrid bipolar stepping motor has an integrated 28 cm (11″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The stepper motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in). Pololu 2268
zł534.89
4 weeks
No product available!
Hybrid bipolar stepper motor eith integrated 18cm (7″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7A at 2.8V, allowing for a holding torque of 3.7kg-cm (51 oz-in). Pololu 2689
zł492.64
4 weeks
No product available!
Hybrid bipolar stepping motor with integrated 38cm (15″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7A at 2.8V, allowing for a holding torque of 3.7kg-cm (51 oz-in). Pololu 2690
zł523.57
4 weeks
No product available!
Miniature stepper motor with a 100:1 metal gear offers high precision movement and increased torque, making it a suitable choice for projects requiring precise positioning, such as mobile robots, dispensing mechanisms or laboratory devices. The compact design and wide supply voltage range enable integration in complex mechatronic systems. DFRobot FIT0503
zł27.33
4 weeks
No product available!
This NEMA 17 pancake bipolar stepping motor from Sanyo features an integrated encoder. The stepper motor itself has a 1.8° step angle (200 steps/revolution) and each phase draws 1 A at 5.4 V, allowing for a holding torque of 1.9 kg-cm.
zł1,225.79
4 weeks
No product available!
This NEMA 17-size pancake bipolar stepping motor from Sanyo features an integrated high-resolution (1000 P/R) quadrature encoder. The stepper motor itself has a 1.8° step angle and each phase draws 1 A at 3.5 V, allowing for a holding torque of 0.85 kg-cm.
zł1,225.74
4 weeks
No product available!
This NEMA 17-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in). Pololu 2267
zł220.60
24h
Available quantity: 2
Available
A set consisting of a stepper motor driver module based on the ULN2003 system and a stepper motor powered with 5V voltage.
zł12.85
4 weeks
No product available!
NEMA17 bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8 ° per step), a rated voltage of 12 V, and consumes up to 0.5 A per coil. JK42HS40-0504
zł66.67
24h
Available quantity: 2
Available
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 4.3 V, and consumes up to 0.8 A per coil. Pololu 2256
zł251.15
4 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 12 V and draws a current of 0.4 A per coil. 42BYGHW208
zł48.23
4 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 12 V and draws a current of 1.2 A per coil. OK42HB40-1204A-TJ750
zł57.51
4 weeks
No product available!
Bipolar stepper motor powered with a voltage of up to 12 V and a maximum current of 400 mA. SparkFun ROB-10551