X-NUCLEO-53L7A1 - VL53L7CX distance sensor expansion board for STM32 Nucleo
ID: 1183356
5906623410774
zł175.00
Tax included
zł142.28 tax excl.
ToF VL53L7CX distance sensor expansion board with a 64-pixel array, a range of up to 3.5 m and a viewing angle of up to 90°. The overlay is compatible with STM32 Nucleo boards. STMicroelectronics X-NUCLEO-53L7A1
Description
X-NUCLEO-53L5A1 is an expansion board with ToF VL53L5CX distance sensor designed for STM32 Nucleo kits, The chip integrates SPAD array, physical infrared filters and optical elements (DOE) to achieve good performance in different ambient light conditions. The sensor can measure distances up to 3.5 meters in 64 zones with a wide 90° field of view. Data can be read at up to 60 Hz, and thanks to ST Histogram algorithms, the VL53L7CX is able to detect various objects in the field of view. The module allows gesture detection. It will excel in applications such as room mapping, liquid level detection or AR and VR applications. The overlay is compatible with STM32 Nucleo boards and has an Arduino UNO R3 connector.
Features
- Field of view (FoV) 60° x 60° (90° diagonal)
- Multi-zone output with separate 4x4 or 8x8 zones
- Autonomous low-power mode with programmable interruption threshold
- Range up to 350 cm
- Multiple target detection and distance measurement in each zone
- 60 Hz refresh capability
- Histogram algorithm and compensation minimizes or removes the impact of glass crosstalk
- Motion indicator for each zone, showing if targets have moved and how they have moved
- Fully integrated module
- Emitter: 940 nm invisible light vertical cavity surface emitting laser (VCSEL) and integrated analog controller
- Diffractive optical elements (DOE) on the transmitter and receiver to enable square FoV
- Receive SPAD diode array
- Low-power microcontroller with firmware
- Easy integration
- 0.25, 0.5 and 1 mm spacers to simulate air gaps
- Compatible with STM32 Nucleo boards
- Connector compatible with Arduino UNO R3
- Software for the sensor available on the manufacturer's website
Kit contains
- X-NUCLEO-53L7A1 expansion board
- Aperture kit
1183356
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
STM32 Nucleo-64 development board with STM32L476RGT6 MCU, supports Arduino and ST morpho connectivity
zł73.90
24h
Available quantity: 31
Available
NUCLEO series starter kit equipped with the STM32G491RE microcontroller (512 kB Flash, Cortex-M4), with a built-in programmer-debugger ST-Link-V3E, equipped with connectors compatible with Arduino. STMicroelectronics NUCLEO-G491RE
zł78.07
24h
Available quantity: 12
Available
Other products in the same category (16)
The X-NUCLEO-IHM14A1 motor driver expansion board is based on the STSPIN820 monolithic driver for stepper motors.
zł87.00
24h
Available quantity: 3
Available
An expansion board designed for the STM32 Nucleo based on the Teseo-VIC3DA, a global navigation satellite system (GNSS) chip. STMicroelectronics X-NUCLEO-GNSS2A1
zł297.81
24h
Available quantity: 2
Available
An expansion board with digital outputs (for industrial applications) designed to work with the STM32 Nucleo kits. The module is based on a single high-side switch IPS160HF. STMicroelectronics X-NUCLEO-OUT08A1
zł209.46
24h
Available quantity: 1
Available
The P-NUCLEO-53L1A1 is a complete evaluation kit allowing anyone to learn, evaluate, and develop their application using the VL53L1X ToF, long-distance ranging sensor technology
zł313.49
24h
Available quantity: 4
Available
The X-NUCLEO-IKS02A1 industrial motion MEMS sensor expansion board is compatible with the Arduino UNO R3 connector layout. STMicroelectronics X-NUCLEO-IKS02A1
zł127.55
24h
Available quantity: 1
Available
Board with digital outputs designed to work with STM32 Nucleo. It is based on the IPS1025H single high-side switch circuit. STMicroelectronics X-NUCLEO-OUT05A1
zł272.33
24h
Available quantity: 1
Available
The X-NUCLEO-IHM17M1 is a low voltage three-phase brushless DC motor driver expansion board based on the STSPIN233 for STM32 Nucleo. It provides an affordable and easy-to-use solution for the implementation of portable motor driving applications such as thermal printers, robotics and toys
zł86.24
24h
Available quantity: 1
Available
Shield for STM32 Nucleo that allows you to add the possibility of operating a three-phase brushless motor (BLDC) or synchronous permanent magnet (PMSM). It uses the L6230 chip for control. X-NUCLEO-IHM07M1
zł54.13
24h
Available quantity: 3
Available
X-NUCLEO-NFC10A1 is an NFC/RFID expansion board for STM32 Nucleo systems, based on the ST25R200 chip. With support for multiple communication standards, an integrated 13.56 MHz antenna, and power-saving features, it is ideal for IoT applications, access control systems, contactless payments, and wireless identification.
zł214.16
24h
Available quantity: 2
Available
The X-NUCLEO-53L0A1 expansion board features the VL53L0X ranging and gesture detection sensor, based on ST’s FlightSense™, Time-of-Flight technology. It is an evaluation board that provides an introduction to the ranging and gesture detection capabilities of the VL53L0X module
zł183.28
1 weeks
No product available!
Shield for STM32 series Nucleo, XNucleo and Arduino series for communication via RS485 and CAN interfaces (CAN is only available for Nucleo and XNucleo plates). Shield is based on MAX3485 and SN65HVD230 systems
zł39.91
24h
Available quantity: 9
Available
Expansion board with LCD TFT 2.2 "display for STM32 Nucleo sets. Equipped with SPI NOR Flash 64Mbit memory for storing images and a joystick for GUI navigation. STMicroelectronics X-NUCLEO-GFX01M2
zł183.31
24h
Available quantity: 2
Available
DC motor controller powered with a voltage in the range of 1.8 to 10V with a maximum output current of 2.6A. Compatible with STM32 Nucleo. Shield is equipped with a connector compatible with the Arduino UNO R3 standard. STMicroelectronics X-NUCLEO-IHM13A1
zł95.96
24h
Available quantity: 2
Available
Expansion board for STM32 Nucleo with NFC card reader based on ST25R3916B chip. The board includes a connector compatible with the Arduino Uno R3. STMicroelectronics X-NUCLEO-NFC08A1
zł173.64
24h
Available quantity: 3
Available
Expansion module designed for STM32 Nucleo-64 boards with built-in Power Delivery peripheral (UCPD). It allows prototyping of devices using the TCPP03-M20 system and USB type C in the DRP (Dual Role Power) and DRD (Dual Role Data) functions. STMicroelectronics X-NUCLEO-DRP1M1
zł148.47
24h
Available quantity: 2
Available
The STEVAL-FKI868V2 evaluation board is based on the S2-LP sub-1GHz ultra-low power low data-rate transceiver suitable for ISM bands and wireless M-Bus. The NUCLEO-L053R8 motherboard is equipped with an STM32L0 low power microcontroller to control the S2-LP
zł361.71
24h
Available quantity: 1
Available
ToF VL53L7CX distance sensor expansion board with a 64-pixel array, a range of up to 3.5 m and a viewing angle of up to 90°. The overlay is compatible with STM32 Nucleo boards. STMicroelectronics X-NUCLEO-53L7A1