

zł288.84 tax excl.
An adapter dedicated to programming STM32 microcontrollers in QFP100 chassis. It has a 20-pin JTAG/SWD connector and/or a 4-pin USART1 interface for programming and testing. Waveshare STM32-QFP100
An adapter dedicated to programming STM32 microcontrollers in QFP100 chassis. It has a 20-pin JTAG/SWD connector and/or a 4-pin USART1 interface for programming and testing. All MCU pins are available on expansion connectors with a 2.54 mm raster. The module has a built-in 32.768 kHz oscillator and the ability to connect an external quartz via a socket on the board. Besides, the user has two LED indicators for testing, which are connected to the I/O pins via jumpers. The adapter is compatible with chips in the QFP100 chassis, including the STM32L1xxV, STM32F1xxV, STM32F2xxV, STM32F3xxV and STM32F4xxV series. "Device selection jumpers" must be configured to select device programming. Full documentation is available on the product page.
1. JTAG/SWD | 7. Power supply 5V |
2. USART1 | 8. External crystal socket |
3. LED | 9. LED power |
4. Extension header | 10. Device jumper |
5. BOOT jumper | 11. LED jumper |
6. Regulator 3,3 V | 12. Crystal 32,768 kHz |
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
ARM Cortex-M3 CPU, 512kB Flash, 64kB RAM, USB, CAN, 5xUART, 2xI2C, 2xSPI, ADC, STM, LQFP100, RoHS
No product available!
ARM Cortex-M3 CPU, Low power, 128kB Flash, 16kB RAM, LCD, USB, 3xUART, 2xI2C, 2xSPI, ADC, DAC, STM, LQFP100, RoHS
ARM Cortex-M4 CPU, 1024kB Flash, 192kB RAM, Ethernet, Camera, USB OTG FS+HS, 2xCAN, 4xUART, 3xI2C, 3xSPI, ADC, DAC, STM, LQFP100, RoHS
No product available!
ARM Cortex-M3 CPU, Low power, 128kB Flash, 16kB RAM, USB, 3xUART, 2xI2C, 2xSPI, ADC, DAC, STM, LQFP100, RoHS
JTAG / SWD programmer-debugger with USB and WiFi interface. It supports microcontrollers and microprocessors with Cortex-M, Cortex-A, Cortex-R and ARM7, ARM9 and ARM11 cores of most manufacturers as well as 8051, RISC-V, PIC32, RX. Segger J-Link WiFi (8.14.28)
JTAG interface for microcontrollers with ARM core
J-Link BASE is a USB powered debug probe supporting a large number of CPU cores. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-link BASE Compact (8.19.00)
Adapter with galvanic isolation for STLINK-V3SET. It also allows the programmer to work with systems powered with voltages below 3.3 V. STMicroelectronics B-STLINK-ISOL
No product available!
Compact programmer module for STM32 microcontrollers for soldering into a board. Supports JTAG/SWD interfaces. STLINK-V3SET has a virtual COM port and interfaces SPI, I2C, CAN, GPIO for programming via bootloader. STMicroelectronics STLINK-V3MODS
A tool for programming and debugging applications for systems with the ARM Cortex-M and ARM Cortex-A core. It uses an embedded GDB server that is emulated via USB. Adafruit 3839
No product available!
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 microcontrollers
J-LINK EDU Mini is a version of the J-Link EDU (8.08.90) in a reduced form factor with identical functionality for Cortex-M based targets. It has been designed to allow students and educational facilities as well as hobbyists access to top of the line debug probe technology. Version for non-commercial use only. J-Link EDU mini
Versatile, low-cost debugger and programmer for 8-bit and 32-bit microcontrollers
Hi-Speed JTAG/SWD Emulator for ARM7/9, Cortex and Renesas RX cores with USB interface, Segger
No product available!
JTAG/SWD Emulator for ARM7/9, Cortex and Renesas RX cores with USB interface, Segger
Compact tool for debugging and programming STM32 microcontrollers via JTAG / SWD interfaces. STMicroelectronics STLINK-V3MINIE
A tool for debugging and programming STM32 microcontrollers via JTAG/SWD interfaces. It has a built-in current measurement unit (SMU) designed to optimise power consumption. STMicroelectronics STLINK-V3PWR
No product available!
An adapter dedicated to programming STM32 microcontrollers in QFP100 chassis. It has a 20-pin JTAG/SWD connector and/or a 4-pin USART1 interface for programming and testing. Waveshare STM32-QFP100