USR-WIFI232-B2 - UART-WiFi converter
ID: 588808
zł53.48
Tax included
zł43.48 tax excl.
UART to Wi-Fi 802.11 b/g/n converter module with external antenna, which can connect traditional serial device and MCU controlled device to Wi-Fi network for control and management. USR-WIFI232-B2
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
UART to Wi-Fi 802.11 b/g/n converter module with external antenna, which can connect traditional serial device and MCU controlled device to Wi-Fi network for control and management. The module has an Ethernet port and can perform data transmission between Wi-Fi, UART and Ethernet. It can work in AP, STA and AP+STA modes.
Features
- Certification FCC/CE
- Wireless Standard 802.11 b/g/n
- Frequency Range 2.412GHz-2.484GHz
- Transmit Power 802.11b: +20dBm (Max.), 802.11g: +18dBm (Max.), 802.11n: +15dBm (Max.)
- Receive Sensitivity 802.11b: -89dBm, 802.11g: -81dBm, 802.11n: -71dBm
- Antenna External: I-PEX connector
- Data Interface UART: 300bps~460800bps
- Ethernet: 10Mbps/100Mpbs
- GPIOs
- Working Voltage 3.3V (+/-5%)
- Working Current AP: 169mA (average), 305mA (peak)
- STA: 164mA (average), 197mA (peak)
- Working Temp. -40°C ~ 85°C
- Storage Temp. -40°C- 125°C
- Size 25mm x 40mm x8mm
- Software Parameter
- Wireless Network Type Station/AP mode
- Security Mechanism WEP/WPA-PSK/WPA2-PSK
- Encryption Type WEP64/WEP128/TKIP/AES
- Work Mode Transparent transmission mode, serial command mode
- Setting Command AT+ instruction set
- Network Protocol TCP/UDP/ARP/ICMP/DHCP/DNS/https
- Max. Client Number in TCP Server Mode 32
- User Configuration Web server+AT command config
588808
Data sheet
- Logic voltage
- 3,3 V
- Wi-Fi chip
- Inny
- Wi-Fi standard
- 802.11 b/g/n
- Frequency range
- 2,4 GHz
- Baud rate
- Inny
- Antenna connector
- Brak
- Power supply voltage
- 3,3 V
You might also like
Available
The UART-USB converter built on the FTDI FT232RL chip. Compatible with 3.3V and 5V voltages. DFRobot DFR0065
zł63.69
24h
Available quantity: 1
Available
USB - UART converter based on the FT232RL chip. Compatible with voltages of 3.3 V and 5 V, has been equipped with a USB type C connector. Waveshare FT232 USB UART Board (Type C)
zł29.54
24h
Available quantity: 12
Available
USB - UART converter based on the PL2303 chip. Compatible with voltages of 1.8 V, 2.5 V, 3.3 V and 5 V, it is equipped with a USB type C connector. Waveshare PL2303 USB UART Board (Type C)
zł14.08
24h
Available quantity: 10
Available
Other products in the same category (16)
WiFi module, IEEE802.11b / g / n, I-PEX connector, High-Flying, RoHS
zł110.11
24h
Available quantity: 4
Available
WiFi/BLE module that supports both the 2.4 GHz and 5 GHz WiFi bands, as well as Bluetooth Low Energy (BLE 4.2) communication. It has a built-in chip antenna and 2.54 mm pitch connectors, which greatly facilitate prototyping. Tibbo WA2000C
zł162.90
24h
Available quantity: 3
Available
Miniature (25x40mm) WiFi b/g/n module for surface mounting with support for TCP and UDP protocols operating in standalone and access point modes. The module is equipped with UART and Ethernet interfaces, it is also possible to control GPIO lines. Powered by 3.3V
zł89.90
6 weeks
No product available!
Industrial converter that provides easy communication between the RS485 interface and RJ45 Ethernet or WiFi wireless network. Mounted on an industrial DIN rail. USR-DR404
zł127.55
24h
Available quantity: 7
Available
WIFI-LPB100-A module Eval Kit enables UART data transmission via WiFi, ultra low power consumption, encrypted communication
zł99.85
4 weeks
No product available!
RN-171 Series 54 Mbps 2.4GHz SMT WiFly GSX 802.11 b/g Wireless LAN module, MICROCHIP, RoHS
zł121.91
24h
Available quantity: 7
Available
Comprehensive development platform for Espressif ESP32 a WiFi-compatible microcontroller and nearly 30 I/O pins. DEV-13907
zł121.06
24h
Available quantity: 3
Available
Low power Wi-Fi module integrating wireless LAN and Cortex-M4 STM32F411CE microcontroller. It has 2 MB external flash memory, 512 KB bytes embedded flash memory, 128 KB RAM and peripherals. Seeed Studio 113990108
zł53.60
24h
Available quantity: 3
Available
2.4 GHz WiFi module based on W600. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 113020031
zł59.90
6 weeks
No product available!
WiFi module developed by AI-Thinker Co., Ltd with ESP8266 processor. Integrates a 32-bit MCU microcontroller with 80 MHz clock, RTOS support, Wi-Fi and antenna. The module supports the IEEE802.11 b / g / ni standard and has a complete TCP / IP protocol stack. AI-Thinker ESP-12S
zł10.18
24h
Available quantity: 10
Available
ArduCAM CC3200 UNO Board CC3200 UNO is full featured development board almost like a combination of CC3200 Launchpad plus CC3200CAMBOOST pack from TI while keeping exactly the same size as Arduino UNO and pin out. B0078
zł276.47
24h
Available quantity: 3
Available
Ultra miniature WiFi b/g/n module, equipped with UART, SPI, PWM and GPIO interfaces. The ability to work as an access point and in standalone mode. 3.3V power supply.HF-LPT200-1
zł79.90
24h
Available quantity: 1
Available
Development board ESP8266 with WiFi module; WRL-13231
zł127.80
24h
Available quantity: 5
Available
Development board with dimensions and spacing compatible with Arduino Uno R3. It have built-in Wi-Fi ESP8266 module. The device is compatible with WeDOS D1, it can be programmed from the level of Arduino IDE
zł25.40
24h
Available quantity: 13
Available
An integrated module combining WiFi, Bluetooth 4.0 and FM radio. It has derived SDIO, UART and PCM interfaces. Ampak AP6335
zł71.84
24h
Available quantity: 4
Available
Transceiver module equipped with SoC ESP8285 IoT enabling communication with WiFi networks. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 113020011
zł78.73
24h
Available quantity: 2
Available
UART to Wi-Fi 802.11 b/g/n converter module with external antenna, which can connect traditional serial device and MCU controlled device to Wi-Fi network for control and management. USR-WIFI232-B2