Category: RETIRED PRODUCTS

RGB LED matrix display with a resolution of 128x64 (8192 LED). modPan128x64

A stereoscopic microscope with LED backlight, equipped with a trinocular head with an entrance to the camera. It has a wide stand for the test items. KOPPACE KP-7045T-B3

Module with 10 DoF IMU ICM20948 sensor (accelerometer, gyroscope and magnetometer) and LPS22HB (barometer). Communication via the I2C interface. Waveshare Pico-10DOF-IMU

Female terminal block, 8-pin. 3.5 mm pitch. Height 15.6 mm. GOLTEN 15EGTK-3.5-08P-14-00AH

Test kit with 6 Pogo Pin spring probes designed to work with boards with an ISP connector. It enables the programming of the set without the need to solder the pins. SparkFun KIT-11591

A LiDAR camera with a small size and a resolution of 2 MP equipped with an IMU unit. It enables very accurate depth detection. Range up to 9 meters. Intel RealSense LiDAR Camera L515

Module with MOSFET RFP30N06LE transistor with N channel. Equipped with two screw connections. For assembly. SparkFun COM-12959

Module with jack connector (TRS) and balanced line transmitter THAT 1646. Offers low distortion and high attenuation. SparkFun BOB-14002

Module with VS1000D chip and SPI Flash memory, which allows you to play sounds in Ogg Vorbix and WAV format stored on a SPI Flash memory. SparkFun DEV-14006

Module with a UV light sensor VEML6070 dedicated to micro:bit. It communicates via the I2C interface. SparkFun SEN-15273

Audio expansion module designed for Odroid C2, C1+ and C4 minicomputers. Equipped with a DAC I2S converter and two RCA connectors and a Toslink connector. Hardkernel HiFi Shield 2

Case dedicated to Orange Pi Zero Plus2 H3 and Orange Pi Zero Plus2 H5 computers. Enables the installation of an expansion module. Orange Pi OP0011

A set of two cameras with a Sony IMX219 sensor, allows you to rotate the camera and control the tilt angle. Works with Jetson Nano and Xavier NX. The camera is equipped with an 8MP matrix. ArduCAM B0191PT

2500 mW laser head designed for installation in a CNC machine. It allows you to engrave in materials such as wood, plastics, paper or thin leather. CNClaser2500mW

Camera module with a resolution of 13 MP equipped with an image sensor AR1335. It is equipped with a FoV 50° lens with an M12 mount. Designed for Raspberry Pi and Jetson Nano. ArduCAM B0277

Thermally conductive tape used as a replacement for thermally conductive paste. They are very flexible and characterized by high compressibility. AG Termopasty ART.AGT-161

Neodymium rectangular magnet with dimensions of 5x5mm a and a height of 5 mm.

Module with a UV ultraviolet light sensor VEML6075. It enables measurement of the level of UVA (350-375 nm) and UVB (315-340 nm) radiation. It communicates via the I2C bus. Pimoroni PIM460

Extension module for Raspberry Pi. The board has 7 RGB LEDs, four 14-segment displays, three single-color LEDs, as well as three touch buttons, a BMP280 sensor and a buzzer. Pimoroni PIM242

Module with 6 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM187