- Out-of-Stock
zł971.80
Rainbow HAT - Android Things extension module for Raspberry Pi
ID: 585218
Extension module for Raspberry Pi. The board has 7 RGB LEDs, four 14-segment displays, three single-color LEDs, as well as three touch buttons, a BMP280 sensor and a buzzer. Pimoroni PIM242
Description
Android Things expansion module designed for Raspberry Pi minicomputers. The board houses 7 RGB LEDs, four 14-segment displays, three single-color LEDs, as well as three capacitive touch buttons, a temperature and pressure sensor BMP280 and a piezoelectric buzzer. The module is plugged into the Raspberry Pi via a standard 40-pin connector. On the edge of the board there is an additional connector with I2C, UART and SPI interfaces, giving the possibility of further expansion of the set. It is dedicated to Android Things projects, but can also be used for Raspberry Pi OS systems with a Python library. The tile will be used in a wide range of projects, including weather station, clock, timer or stopwatch.
Attention!
Please note that if you're using Rainbow HAT with a Raspberry Pi with PoE pins (that's models 3B+ and later), then you'll need to use a set of stand-offs to ensure that the new PoE pins do not contact components on the underside of Rainbow HAT.
Please note that if you're using Rainbow HAT with a Raspberry Pi with PoE pins (that's models 3B+ and later), then you'll need to use a set of stand-offs to ensure that the new PoE pins do not contact components on the underside of Rainbow HAT.
Features
- 7 APA102 RGB LEDs
- Four 14-segment alphanumeric displays (green LEDs)
- Display driver HT16K33
- Three capacitive touch buttons
- Atmel QT1070 touch driver chip
- Blue, green and red LEDs
- Temperature and pressure sensor BMP280
- Piezo buzzer
- Leads for servo, I2C, SPI and UART
- Compatible with all Raspberry Pi models with a 40-pin connector
- Python library
585218
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł299.00
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł481.73
24h
Available quantity: 131
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł779.00
24h
Available quantity: 140
Available
Other products in the same category (16)
No product available!
Hotair soldering station 100..480 deg. C, soldering tip 75W 200..480 deg. C. Settings are displayed on LED displays
Retired
No product available!
Soldering station 5in1: hotair 100..480 degrees C, soldering tip 75W, power supply 0..15V / 1A, RF signal tester, voltage meter. Included, among others set of nozzles and wires for the power supply
Retired
No product available!
No product available!
No product available!
Laboratory power supply KORAD KA3005P 0-30V 5A communication with PC memory 5 power profiles
Retired
No product available!
This compact, inexpensive plastic gearmotor (high-power brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range.
Retired
No product available!
Digital Proximity, Ambient Light, RGB and Gesture Sensor, Avago Technologies, RoHS
Retired
No product available!
Integrated analogue base station RFID (front-end) of the company EM Microelectronic with a frequency of 13.56MHz. The system has a SOP20 housing
Retired
No product available!
Computer fan housing Raspberry Pi 3, Raspberry Pi 2 model B and Raspberry Pi 1 model B + in dark blue plastic color
Retired
No product available!
Case for the Raspberry PI 2 model B, Raspberry PI 1 model B+ and Raspberry PI 3 computers, manufactured from high quality acrylic. CLEAR
Retired
No product available!
No product available!
No product available!
No product available!
Infrared sensor that allows measurement of distances up to 15cm, has a built-in infrared illuminator, IR receiver and a perimeter of the received signal
Retired
No product available!
Miniature (22x13.5x6mm) WiFi module b / g / n with TCP and UDP protocols operating in standalone and access point modes. 2.0mm goldpin connector. The module is equipped with a UART interface, it is also possible to control GPIO lines (also as PWM). Powered by 3.3V. Antenna: copper wire
Retired
No product available!
Extension module for Raspberry Pi. The board has 7 RGB LEDs, four 14-segment displays, three single-color LEDs, as well as three touch buttons, a BMP280 sensor and a buzzer. Pimoroni PIM242