Category: Peripheral modules
Subcategories
There are 966 products.
Module with 512 kbit (64kB) EEPROM. Communication is via the I2C interface. The module has 3 jumpers to select one of 8 addresses. SparkFun COM-18355
Air quality sensor module based on SGP30 system. The board has been equipped with Qwiic connectors. SparkFun SEN-16531
Module with real time clock (RTC) DS1307 and CR1225 battery socket. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020013
Grove module with temperature, humidity and pressure sensor. The board is equipped with a Grove connector and communicates via I2C or SPI. Seeed Studio 101020193
Module with proximity and ambient light sensor based on the VCNL4020 system. It allows you to detect obstacles in the range from 0 to 20 cm and measure light intensity from 0.26 to 16,000 lux. It communicates via the I2C bus. Adafruit 5810
IoT module with the STM32WLE5JC chip, which connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. There is a Grove connector on the board. Seeed Studio 113020091
Module with 20 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020128
Module with 24-bit ADC NAU7802 converter. It enables reading data from strain gauges and scales. I2C interface. SparkFun SEN-15242
et with a measuring module and a probe for measuring electrical conductivity. It allows you to measure the salinity of water and soil. It has a Gravity analog output interface. DFRobot DFR0300-H
A 4-core cable with a length of 50 cm, both terminated with a Grove plug. Seeed Studio 110990038
Module with BME280 environmental sensor. It allows you to measure temperature, humidity and pressure. The sensor is equipped with two communication interfaces: SPI and I2C (Qwiic). SparkFun SEN-15440
A set with a radio transmitter and receiver operating at 433 MHz. The modules are equipped with Gravity connectors and communicate via a digital interface. DFRobot TEL0140-1
Module with digital temperature sensor TMP117. It enables temperature measurement in the range from –55°C to 150°C with very high accuracy up to ± 0.1°C. The system communicates via the I2C interface. SparkFun SEN-15805
Module with the LIS2DW12 3-axis accelerometer. The system has a user selectable measurement scale of ± 2g/±4g/±8g/±16g. There is a Gravity connector on the board. DFRobot SEN0409
This V2 Rotation Sensor is arduino compatible multi-ring rotation sensor. It is based on multi-turn precision potentiometer. It can rotate upto 10 laps. DFR0058
Module with a pressure sensor DPS310 with high measurement accuracy. The board is equipped with a Grove connector and communicates via the I2C or SPI interface. Seeed Studio 101020812
Module with DHT20 temperature and humidity sensor. It allows you to measure humidity in the range from 0 to 100% and temperature from -40 to 80℃. DFRobot SEN0497
Expansion module with Qwiic connectors. The board is equipped with a Grove connector and allows communication via the I2C interface. Seeed Studio 103020292
The extension cables let you locate Pmod 6" away from its host board, or use your 12-pin Pmod on a system board with only two 6-pin Pmod headers available. 240-021-2