Decoder dedicated to receive digital terrestrial TV programs in the DVB-T2 H.265 standard. Designed for TVs with HDMI, USB, SCART and RF input. BLOW 4625FHD

GPS module with 72-channel GNSS NEO-M8U receiver. The system can receive data from all major positioning systems: GPS, GLONASS, Galileo and BeiDou. It has UART, I2C and SPI interfaces. Built-in accelerometer and gyroscope. SparkFun GPS-16329

Module with a button and green LED backlight. Controlled by the I2C interface, it has a built-in debouncing mechanism, pull-up resistors as well as interrupts and a FIFO queue. SparkFun BOB-16842

Module with a pulse sensor and the level of SpO2 (oxygen saturation level). It is based on the MAX30102 chip and communicates via the I2C or UART interface (Gravity connector). DFRobot SEN0518

Module with a 7-color ACeP e-Paper display with a diagonal of 5.7" and a resolution of 600 × 448 px. It communicates via the SPI interface. Pimoroni PIM609

Resistive soil moisture sensor. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020008

A module with a sensor used to measure the activity of the heart. It allows you to strengthen and extract the heartbeat signals from biomedical electrodes. It has an analogue output and a heartbeat indicator (LED). SparkFun SEN-12650

RGB LED matrix display with a resolution of 64 x 64 (4096 LED). Adafruit 5362

Miniature pressure measurement module equipped with a 25 psi piezoresistive pressure sensor. It allows you to perform calibrated and compensated pressure measurements from 60 mbar to 2.5 bar. SparkFun SEN-16476

Module with black and white 10-digit LCD display. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5379

Step-Up/Step-Down converter module based on the S13V20F5 system. It has an input voltage from 2.8 to 22 V and an output voltage of 5 V. The current efficiency of the converter is up to 2,5 A. Pololu 4085

Module with ToF VL53L4CD sensor with a range of up to 1.3 m and a resolution of 1 mm. It is equipped with a Qwiic connector and communicates via the I2C interface. SparkFun SEN-18993

SparkFun Cab-12970

Lepton 3.5 thermal imaging camera module with PureThermal Mini Pro adapter. It allows you to connect the camera via the USB UVC interface, e.g. to a computer. SparkFun DEV-17544

Development board with ATmega4809 microcontroller and Microchip ECC608 cryptographic chip. It is equipped with 6 analog input pins, 14 digital inputs/outputs (5 as PWM output) and Grove ports. Seeed Studio 102010288

Multi-functional environmental sensor consisting of SHTC3 temperature and humidity sensor, BMP280 pressure sensor, VEML7700 ambient light sensor and ML8511 UV sensor. DFRobot SEN0500

The module is equipped with four 10A / 250VAC relays controlled independently via a serial bus (UART) or from a PC (through a microUSB connector). The NO / NC contacts of the relays have been led to the ARK screw terminals. ICSTATION ICSE012A

Module with 3-axis ADXL375 accelerometer with a wide measurement range up to ±200g. The board is equipped with a STEMMA QT connector and communicates via the I2C or SPI interface. Adafruit 5374

LCD panel with the possibility of controlling its transparency. Can block up to about 95% of incident light. Adafruit 3330

Module with MLX90615 temperature sensor with a measurement accuracy of 1°C and a resolution of 0.02°C. It communicates via the UART interface