8" TFT LCD display with touch screen and 5 MP camera. It is equipped with DSI interface for image display and I2C interface for touch panel. Waveshare 8inch DSI LCD (with cam)

Pololu 6V Step-Up Voltage Regulator U3V50F6

Module with a color IPS LCD display with a diagonal of 1.47" and a resolution of 320x172 pixels. It has rounded corners and uses the ST7789 controller (SPI interface). Adafruit 5393

Module with a 7-color ACeP e-Paper display with a diagonal of 5.7" and a resolution of 600 × 448 px. It communicates via the SPI interface. Pimoroni PIM609

The LSM6DS33 combines a digital 3-axis accelerometer and 3-axis gyroscope into a single package. The sensor provides six independent acceleration and rotation rate readings whose sensitivities can be set in the ranges of ±2 g to ±16 g and ±125°/s to ±2000°/s, available through I²C and SPI interfaces.

The GP2Y0A60SZ distance sensor from Sharp offers a wide detection range of 4″ to 60″ (10 cm to 150 cm) and a high update rate of 60 Hz. The distance is indicated by an analog voltage, so only a single analog input is required to interface with the module.

Pololu High-Power Motor Driver 36v9

Multi-functional environmental sensor consisting of SHTC3 temperature and humidity sensor, BMP280 pressure sensor, VEML7700 ambient light sensor and ML8511 UV sensor. DFRobot SEN0500

Set with a measuring module and a probe for measuring electrical conductivity. It allows you to measure the salinity of water and soil. It has a Gravity analog output interface. DFRobot DFR0300

This module enables the Feather series range to be expanded with 8 12-bit PWM outputs that can be used, for example, to control servos or LED diodes. Adafruit 2928

A set of 5 modules with a bistable button and LED backlight. The boards are equipped with a Gravity connector and communicate via a digital interface. DFRobot DFR0789

Atmel ATmega32U4 microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.7 A per channel to two brushed DC motors. Pololu 3119

A set of 5 modules with a button and LED backlight. The boards are equipped with a Gravity connector and communicate via a digital interface. DFRobot DFR0785

Module with a pulse sensor and the level of SpO2 (oxygen saturation level). It is based on the MAX30102 chip and communicates via the I2C or UART interface (Gravity connector). DFRobot SEN0518

Pololu High-Power Motor Driver 24v20

Module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 px. The board is equipped with a Grove connector and communicates via the I2C and SPI interface. Seeed Studio 104020250

Module with a temperature and humidity sensor based on the SHT31-D system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 2857

FeatherWing Doubler is a shield that allows you to create your own layout based on two or one Feather series. The plate has 256 holes, including designated, common solder points for supply voltages. Adafruit 2890

Decoder dedicated to receive digital terrestrial TV programs in the DVB-T2 H.265 standard. Designed for TVs with HDMI, USB, SCART and RF input. BLOW 4625FHD

DS3231 Precision RTC FeatherWing adds an extremely accurate I2C-integrated Real Time Clock (RTC) with a Temperature Compensated Crystal Oscillator (TCXO) to any Feather main board. Adafruit 3028