The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5243

Advanced servo controller with UART and USB communication, enabling precise control of multiple servos simultaneously. Compact design and stable power supply via screw connector make the device ideal for integration in robots and automation systems with limited space. Cooperation with the Seeed Studio XIAO ecosystem and the use of serial bus instead of traditional PWM provide efficient, scalable and reliable control in educational, research and DIY projects. Seeed Studio 105990190

Module with 15 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4115

Module with an IO pin expander based on the TCA9534 system. It allows you to add 8 GPIO pins to an I2C-controlled project. SparkFun DEV-17047

Adafruit 1203 - Barcode Reader/Scanner Module - CCD Camera - USB Interface

6.25" DSI capacitive display Waveshare 28918 with an IPS matrix and a touch panel using optical bonding technology offers a high resolution of 720×1560 pixels and wide viewing angles. Designed to work with Raspberry Pi, it enables multi-touch support and brightness adjustment via software. The reinforced surface made of tempered glass provides resistance to mechanical damage. It is suitable for user interface projects, control panels, and portable embedded devices.

Module with white LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0031-W

USB - UART converter based on the FT232RL chip. Compatible with voltages of 3.3 V and 5 V, it is equipped with a microUSB connector. Cytron UC00A

Spring-loaded test needle for connecting and testing modules without soldering

BLE module based on Cortex-M4F core with integrated 2.4GHz antenna. It has been equipped with numerous peripheral systems, including UART, I2C, SPI, I2S interfaces and ADC inputs. Has support in the Arduino IDE. SparkFun WRL-15484

LED strip with addressable RGB WS2813 diodes on a white PCB. It is powered by 5 V DC, has a length of 1 m and 144 LEDs/m. Protection level IP30

DC motor driver with voltage 6.5 ... 40V and maximum continuous current 13A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3147

Module with GPS PA1616D receiver based on the MTK3333 system. It is equipped with a USB type C connector and a USB-UART converter. Adafruit 4279

Fixed focal length M12 lens, 16 mm focal length, 1/2″ optical format, ~29° field of view, f/2.0 aperture, compact design for interchangeable lens camera modules

LCD 2x8, 58x30mm, LED backlight, "fast" 1-LED 20mA, cyryllic

The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (5 mΩ), it supports currents up to 12 A continuous and 40 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5383

An efficient step-down converter that reduces the input voltage to 5 V at a maximum current of 100 mA, offering high efficiency due to low quiescent current (<20 μA). It supports input voltage from 5 V to 65 V, has a Power Good (PGOOD) function, an EN input for system shutdown, and short circuit and overheat protection, making it a reliable and energy-efficient solution. Pololu 5373

TFT COLOR 4.3", 120x85mm, video memory controller, easy-to-use static interface, 8-bit color, 480x272, integrated touchpanel

A miniature lidar proximity sensor that detects objects within a range of 1 mm to 130 cm by generating a PWM signal proportional to distance. It operates within a 3-5.5 V range, draws 30 mA, and features an ENABLE pin for sleep mode. It also includes a 3-pin JST SH connector and an indicator LED. Its color, transparency, and light-sensitive properties make it ideal for robotics, automation, and contactless interfaces. Pololu 5485