A 2.8" LCD IPS touchscreen module with a resolution of 320x240 pixels. It uses SPI interface for image display and touch panel. Waveshare 2.8inch Resistive Touch LCD

The MR60FDA2 sensor kit uses 60GHz mmWave technology to reliably detect falls and people. It offers Home Assistant integration thanks to the XIAO ESP32C6 module and pre-installed ESPHome firmware. Equipped with a BH1750 light intensity sensor, RGB LED indicator and the possibility of expanding with Grove sensors, it is ideal for monitoring health, safety and home automation. Seeed Studio 114993388

GSM/GNSS expansion module dedicated to Raspberry Pi minicomputers. Allows to equip RPi with LTE Cat-1/3G/2G communication and positioning within GPS, BeiDou, Glonass, GALILEO, QZSS navigation systems. Waveshare SIM7600E LTE Cat-1 HAT

W25Q128JV flash memory module with 128 Mbit (16 MB) capacity. It supports communication via SPI, Dual or Quad SPI interface. Waveshare W25QXX DataFlash Board

Barcode Scanner Module (E) is a compact and precise module for reading 1D/2D codes, compatible with industrial DPM codes. With USB and UART interfaces and various operating modes, it will work well in automation applications, production, identification and tracking systems.

A single-channel IoT gateway operating in the 868 MHz band, designed for building and testing long-range LoRaWAN networks. Based on the ESP32 WROOM-32 microcontroller, the device offers WiFi and Ethernet connectivity and works with the RA-01H radio module, providing communication distances of up to approximately 1.5 km outdoors. The gateway supports the LoRaWAN 1.0.3 standard and is compatible with The Things Network platform, enabling easy cloud integration. It features a built-in color TFT display, USB-C power supply, and an acrylic enclosure.

Module with three voltage analog outputs ranging from 0 to 10 V. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP3079ADAM

7" LCD display with capacitive touch screen. Receives video/audio signal through HDMI port and touch screen input through micro-USB port. ArduCAM U6104

An expansion board for the BBC micro:bit, allowing easy connection and control of low-power servos. It supports two servos by default, and up to three by disabling the built-in ZIP LEDs. Powered by three AAA batteries, it simultaneously supplies power to the micro:bit, while a power switch protects against unnecessary discharge. With five RGB ZIP LEDs and the ability to connect additional ones, the board allows for attractive lighting effects and is ideal for robotic projects like the :MOVE mini. Kitronik 5623

Crossover for tweeters with a crossover frequency of 3400 Hz. It works with speakers with an impedance of 4 to 8 Ω and offers power up to 60 W

This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+, A+, or Pi 2 and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Pololu 2753

Set with camera and wide angle lens. The set is designed to work with the NVIDIA Jetson Nano computer. ArduCAM B0249

15.6" LCD display with touch screen. The display is equipped with HDMI interface for image display and USB for touch screen. High resolution 1920x1080 pixels. Waveshare 15.6inch HDMI LCD (for EU)

32bit ARM Cortex-M0, 24K Flash, 8K RAM, LQFP48, RoHS

7.9" LCD IPS display with touch screen. The display is equipped with HDMI interface for image display and USB for touch screen. High resolution 400x1280 pixels. Waveshare 7.9inch HDMI LCD

Male terminal block, angled, 10-pin. Pitch 3.81mm. Height 7mm. 15EDGRC. Set of 5 pieces

A broadband antenna that enables various telecommunications networks, including 5G, 4G, 3G and GNSS. It operates in the frequency range from 600 to 6000 MHz. Waveshare 5G/4G/3G/GNSS External Antenna

Module with a 0.96" color OLED display with a resolution of 64x128 pixels. Communicates via the SPI interface. Waveshare 0.96inch RGB OLED Module