A solar cell with a power output of 0.7 W and a voltage output of 5.5 V, measuring 95 x 95 x 3 mm, equipped with pads for soldering wires. Ideal for powering small electronic devices in DIY projects.

Protective cover for Li-Po batteries. Used to safely charge, store and transport cells

Universal USB wall charger with 65W power and 5-20V / 3.25A output. It is equipped with two USB type A and two USB type C sockets, QC4 + fast charging and Power Delivery. Akyga AK-CH-17

9V battery clip with a 125 mm cable and a DC plug 2.1 × 5.5 mm with center positive polarity enables easy power connection for electronic devices requiring 9 V. Suitable for hobby, service, and music projects.

Solar panel with an output voltage of 5.5 V and a power of 0.4 W. It has dimensions of 70 x 70 x 3 mm and pads for soldering the wires

B6 charger cable with all the most popular connectors used in batteries

A set of XT120 connectors (male plug and female socket with covers) with a maximum forward current of 60 A. It will work as a battery connector or a power connector in RC models. Amass XT120

XT60EW-M connector (male plug) with a maximum conduction current of 20 A. Equipped with mounting holes, it will work as a battery connector or power connector in RC models. Amass XT60EW-M

XT60EW-M connector (male plug) with a maximum current of 30 A. Equipped with mounting holes, it will work as a battery connector or a power connector in RC models. Amass XT90E-M

Protective cover for the battery for the DJI Mini 2 drone. Used to safely charge, store and transport Li-Po batteries

USB-C Charger Akyga® AK-CH-22 is a modern device that combines innovation with a practical and compact design. Thanks to GaN technology, it is significantly more efficient than traditional chargers. Gallium nitride allows for reduced energy loss, resulting in lower heat emission, higher efficiency and a smaller device size. This makes the charger an ideal solution for both home use and travel.

Protective cover for Li-Po batteries. Used to safely charge, store and transport cells

The EMI EN2030-16-F network filter is a professional device designed to protect electrical devices against electromagnetic nterference, effectively minimizing the impact of these interferences on the equipment and limiting the generated interference, used in various devices from servers to industrial machines. Akyga EN2030-16-F

The charger module is designed for 2 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).

Solar energy management module designed for photovoltaic panels. It allows you to charge LiPo 1S batteries with a rated voltage of 3.7 V

The Akyga AK-SC-E11 adapter allows you to convert the CCS1 connector to CCS2, which is useful when only the CCS1 connector is available at the fast charging station and the electric car has a CCS2 socket. This adapter makes DC charging simple and fast. Akyga AK-SC-E11

The battery tester is a compact device that allows you to check in a very simple and quick way whether the batteries or rechargeable batteries we use are functional. Our devices require good batteries or accumulators and we are often not sure if our equipment has the right power supply to withstand, for example, during a trip or celebration. Nothing easier, you can check it using a tester.

Sthor brand extension cord with grounded sockets, child protection, power cut-off switch, solid three-wire cable with a cross-section of 1.5 mm² in a PVC sheath, allows you to power demanding receivers at home and in the office, with a plastic housing, mounting holes , rated voltage 230V/50Hz, maximum load 3500W, five sockets, length 5m and blue switch illumination. Sthor-72358

The LM7805 5V 1.2A linear stabilizer module is a reliable and easy-to-use voltage stabilization solution for all electronics projects. Thanks to its solid construction, built-in protections and high efficiency, this module provides a safe and constant 5V power supply, being an invaluable component in the work of every electronics engineer

The symmetrical power supply based on LM317 and LM337 offers a DC output in the range of 1.3-25 V with a power of 25W and a current of up to 1A. Equipped with a resettable fuse for overload protection, it is compact with dimensions of 62 x 59 x 30 mm.