Category: Sensors

Temperature sensor based on the DS18B20 chip. It is enclosed in a waterproof measuring probe. It has a 2 m cable and communicates via a 1-Wire interface

The MQ-4 sensor allows methane concentration measurement. The measuring range of the sensor reaches up to 10,000 ppm and an analogue signal is obtained at the output.

Module with an analog TEMT6000 light intensity sensor. The output voltage increases with the intensity of the incident light. The sensor is powered with the voltage of 5 V

Module with pulse and SpO2 level sensor (oxygen saturation level). The module is based on the MAX30102 chip and communicates via the I2C interface.

Module with bi-directional current sensor based on the INA226 system. It allows you to measure current and power, works with a voltage of 0-36 V. It has an I2C interface.

Integrated gas sensor, pressure, humidity and temperature in the LGA-8 housing. Bosch Sensortec BME680

Capacitive proximity sensor with PNP NO output. It can detect the presence of various objects in the range from 1 to 10 mm. The sensor is supplied with the voltage from 6 to 36 V and consumes a current of up to 300 mA. LJC18A3-H-Z/BY

PIR - infrared sensor module, motion sensor, range 6m, RoHS modHC-SR501

280° rotary potentiometer module with analog output. Compatible with 3.3 V and 5 V systems

Infrared sensor module with TCRT5000 chip. It can be used to detect objects in close proximity or detect lines in "Line Follower" robots

The current measurement with the value 0-20A is carried out by the ACS712-05 system based on the Hall effect. The sensitivity of the system is 100mV / A (analogue signal) .modACS712-20

The module with an alcohol sensor (MQ-3), allows you to measure the concentration of ethanol in the air. The module has an analogue output and an output triggered by exceeding the threshold of sensitivity.

Infrared sensor module with TCRT5000. Can be used to detect objects in close proximity or detect lines in "Line Follower" robots

Temperature and humidity sensor DHT21 / AM2301 in housing, -40 to 80 ° C, 0 -100% RH, RoHS

Module with PIR sensor HC-SR501. It can detect movement up to 7 meters with a detection angle of 120 degrees

6DoF module with MPU6050 (3-axis accelerometer, 3-axis gyroscope) powered with 3-5V. I2C communication interface

Pressure sensor module with I2C interface (MPL115A2)

Heart rate monitor module based on the MAX30102 chip. Powered with the voltage from 3.3 to 5V, communication via the I2C interface.

Diffuse sensor with digital output. The threshold can be adjusted with the built-in potentiometer

The GY-86 module is a module with sensors MPU6050, HMC5883L and MS5611, allowing the measurement of traffic in nine axes and the measurement of atmospheric pressure. The module has a built-in 3.3V voltage stabilizer. modGY-86