Category: Power modules
Subcategories
There are 310 products.
Step-Down converter with an output voltage of 5 V, input voltage from 4.5 to 40 V and a maximum current of 2 A. The board is equipped with a segment LED display and a USB output
The protection circuit for one Li-Ion cell with a voltage of 3.2 V. It has the function of charging, discharging and over-discharge protection. The cells can be discharged with a continuous current of up to 12 A
Step-Up/Step-Down converter module based on the S13V15F5 system. It has an input voltage from 2.8 to 22 V and an output voltage of 5 V. The current efficiency of the converter is up to 2 A. Pololu 4084
Modular power supply with a power of 3 W, input voltage from 100 to 240 V and output voltage of 3.3 V. Designed for mounting on a PCB. Hi-Link HLK-PM03
The Step-Down converter module converts the input voltage of 7 - 26 V to a constant 5 V, with a maximum output current of 3 A, recommended up to 1.6 A for long-term operation. The conversion efficiency of the device is 96% and the module size is 22.3 x 17 x 4.2 mm
A handy way to power 12V powered devices with a center-positive 2.1mm DC barrel jack from a USB port. Adafruit 2778
BMS system for three Li-Ion cells with a voltage of 12 V. It has the function of charging with balancer, discharging and over-discharge protection. The cells can be charged with continuous current up to 60 A and discharged with current up to 80 A
The Step-Down D24V3F5 Buck Voltage Regulator module gives the output voltage of 5V with a wide input voltage range of 7-42V and a maximum output current of 300 mA. Pololu 2098
Step Down converter module with an output voltage of 5 V and a maximum current of 2x2,5 A. The board is equipped with four USB connectors
BMS protection circuit designed for 6 Li-Ion cells. It has a charging function with balancer option, a discharging function and an over-discharge protection function. HXYP-C47-MA18-6S
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and an output on a 5.08 mm ARK screw connector. Allows you to power devices with 5 V, 9 V, 12 V, 15 V and 20 V and test chargers by replacing the PD device
BMS protection module designed for 7 Li-Ion cells. It has a charging function with balancer option and an over-discharge protection function. Dedicated to an electric bicycle or scooter
Safety system for two Li-Ion cells with 11.1V. The module has the function of charging cells with the balancer, discharging and the function of protecting the cells against discharge. Cells can be charged with continuous current up to 20A and discharged with current 40A. modBMS40A
Step-up DC-DC converter module based on the LM2587 circuit, input voltage 3.5..30V, regulated output voltage 4..30V. The module is equipped with ARK connectors
Step-up DC-DC converter module, 0.9-5V input voltage, 5V output voltage (max. 500 mA) connected to the USB socket. There is a diode on the board indicating the power connection
Module with the HUSB238 chip, which allows for flexible configuration of the voltage and current supplied through the USB PD port. It allows both manual setting of parameters using jumpers and dynamic control via the I2C bus. Equipped with a USB Type C connector. Adafruit 5807
Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 5 V and a maximum input of up to 2 A. Pololu 4941
Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 3.3 V and a maximum input of up to 2 A. Pololu 4940
Pololu 5V Step-Up Voltage Regulator U1V10F5