.png)
Category: Main categories
Subcategories
There are 23554 products.
3 mm LED matrix. The matrix contains 35 LEDs (5x7 system) in red. Connection diodes are a common anode.
Compact stepper motor driver module based on the MPS MP6602, designed for bipolar and unipolar stepper motors. It supports a 4.5–35 V motor supply, current limit up to 4 A, microstepping down to 1/32 step, and an SPI interface. This version features factory-soldered male header pins. Pololu 5689
Current measurement module using the galvanically isolated Allegro ACS37030LMYATR-040B3 sensor. A combination of Hall-effect sensing and an inductive coil provides DC to 5 MHz measurement bandwidth, a ±40 A range, and a typical response time of 40 ns. The larger carrier board facilitates high-current connections. Pololu 5698
A set of two Pololu wheels measuring 43x19 mm in white. Fits D-shaped shaft with a diameter of 3 mm. Pololu 1090
Ultrasonic distance sensor MB1000 with a range from 0 to 645 cm. It has an output in the form of a serial interface, an analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 723
Metal lens holder with an M12x0.5 thread and a height of 10mm, intended for Raspberry Pi cameras with an interchangeable lens mount, supplied with a mounting gasket. ArduCam U0756M10
Digital signal generator with one output channel. It supports wave types such as sine wave, square, triangle or sawtooth signals and offers generated signal frequencies up to 500 kHz. FG-100
Camera lens with an M12 mount and a 3.6mm focal length featuring reduced geometric distortion, intended for camera modules with 1/2.5" sensors. ArduCam LN012 M25360H06S
Plastic lens holder with M12x0.5 thread and 12 mm height, intended for Raspberry Pi cameras with interchangeable M12 lens mounts. ArduCam LH003
Camera lens with an M12 mount and a 4mm focal length featuring reduced geometric distortion, intended for camera modules with 1/2.5" sensors. ArduCam LN011 M2504ZH05S
A small and practical magnetic field indicator in the form of flexible foil, intended for learning, research, and quality control. It enables easy visualization of magnetic field lines for educational and technical purposes.
11.6 "LCD screen with 1920x1080 resolution. The display is equipped with a capacitive touch screen. Waveshare 11.6inch HDMI LCD (H) (with case) (for EU)
Pololu Carrier with Sharp GP2Y0D810Z0F Digital Distance Sensor 10cm
FL-2C current shunt rated for 75A with a 75mV voltage drop, designed for DC current measurement in combination with a compatible millivoltmeter. Accuracy class 0.5 and 120% overload capability for 2 hours. FL-2C-75A
FL-2C current shunt rated for 60A with a 75mV voltage drop, designed for DC current measurement with a 75mV millivoltmeter. Accuracy class 0.5 and 120% overload capability for 2 hours. CG FL-2C-60A
FL-2C current shunt rated for 50A with a 75mV voltage drop, designed for DC current measurement with a 75mV millivoltmeter. Accuracy class 0.5 and 120% overload capability for 2 hours. CG FL-2C-50A
FL-2C current shunt rated for 40A with a 75mV voltage drop, designed for DC current measurement with a 75mV millivoltmeter. Accuracy class 0.5 and 120% overload capability for 2 hours. CG FL-2C-40A
Temperature sensor for 3D printer - 100K thermistor with 90 cm cables. It can be used to measure the temperature of the table and the head