Category: Main categories

LIR2016 lithium battery with a nominal voltage of 3.7 V and a capacity of 22 mAh, designed for powering small electronic devices that require a coin-type rechargeable battery. Akyga AKY1981

Module with a steam sensor. It can be supplied with the voltage of 3.3 V or 5 V. It has an analog output. DFRobot SEN0121

ARM Cortex-M0+ CPU, Low power, 64kB Flash, 8kB RAM, USB, 2xUSART, 2xI2C, 2xSPI, ADC, STM, LQFP64, RoHS

Contrast sensor module. It has two integrated operating modes: analog and digital. It has the ability to set the digital mode for color detection. DFRobot SEN0147

Non-contact liquid level sensor. It allows you to detect liquids without the need to immerse the sensor in the liquid. Digital output. DFRobot FIT0212

Universal charger designed for Li-Ion, LiPo, LiFe, LiHV, Ni-Cd and Ni-MH batteries. It is powered by a USB type C connector, is equipped with an XT60 socket and a balancer connector. ISDT PD60

Ultrasonic distance sensor with a range of up to 5 m with an analog output The module is supplied with the voltage from 3.3 to 5.5 V. DFRobot SEN0307

12-bit DAC converter module designed to work with the M5Stack sets. It enables the conversion of digital signals into an analog signal. M5Stack DAC Unit

The module with a fingerprint sensor FPC1020A is designed for the M5Stack sets. The sensor has a built-in memory and can store up to 150 fingerprints. M5Stack U008

UT526 is a multifunction meter for comprehensive electrical installation measurements, including insulation tests, RCD operation, and circuit continuity. With a wide range of test voltages and data storage functions, it is perfectly suited for inspection, measurement, and service work.

8x8 pixel LED matrix display with red LEDs. The module is equipped with the 74HC595 controller and communicates via the I2C interface

Set of four 150mm hooks used for prying, pulling, and manipulating components during workshop, service, and assembly work. Neo Tools 04-231

8-bit ST7 MCU, 8kB Flash, 384B RAM, Lite Timer, Autoreload Timer, SPI, LINSCI, 10-bit ADC, SOP20, RoHS

USB 2.0 cable with USB Type-A (m) and USB Type-C (m) connectors, intended for charging devices up to 18W and data transmission, 1 m length, black silicone insulation. Akyga AK-USB-62

USB 2.0 cable with USB Type-A (m) and USB Type-C (m) connectors, intended for charging devices up to 18W and data transmission, 1 m length, pink silicone insulation. Akyga AK-USB-61

USB 2.0 cable with USB Type-A (m) and USB Type-C (m) connectors, intended for charging and data transmission, 1.8 m length, silicone insulation. Akyga AK-USB-60

USB 2.0 cable with USB Type-A (m) and USB Type-C (m) connectors, intended for charging and data transmission, 1 m length, silicone insulation. Akyga AK-USB-59

USB 2.0 cable with USB Type-C (m) and Lightning (m) connectors, intended for charging devices with power up to 30W and for data transmission, 1 m length, blue silicone insulation. Akyga AK-USB-72

USB 2.0 cable with USB Type-C (m) connectors on both ends, intended for charging devices with power up to 60W and for data transmission, 1 m length, purple silicone insulation. Akyga AK-USB-70

USB 2.0 cable with USB Type-C (m) connectors on both ends, intended for charging devices with power up to 60W and for data transmission, 1 m length, green silicone insulation. Akyga AK-USB-69