Category: Main categories

This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 150.58:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.

The module with a matrix LED display 8x16 (128 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Adafruit 4120

Module with a precise real time clock (RTC) DS3231. It has an integrated crystal resonator and communicates via the I2C interface. DFRobot DFR0819

Servo driver based on the Raspberry Pi RP2040 microcontroller. It allows you to control up to 18 servos, has 6 analog inputs and a QW/ST connector for connecting additional sensors. Pimoroni PIM613

Uninterruptible power supply module for Raspberry Pi Pico, which allows you to continue work and safely shut down the microcomputer after a power failure. Waveshare Pico-UPS-A-EN

Module with a 3-axis ADXL343 accelerometer with a configurable measuring range of ±2g/±4g/±8g/±16g. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4097

Switching power supply with a power of 50 W, output voltage of 12 V and current of 4.2 A. It has built-in overload and short-circuit protection and a low profile design. Mean Well LRS-50-12

Module with 16-channel IO expander MCP23017 controlled by the I2C interface. Designed for minicomputers Raspberry Pi. Adafruit 4132

This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 51.45:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.

Module with integrated proximity and ambient light sensors and IR emitter in the VCNL4040 system. It allows the detection of obstacles in the range of 0 to 20 cm (no dead zone). It communicates via the I2C bus. SparkFun SEN-15177

Extension in the form of a HAT overlay with a DVB-T decoder designed for Raspberry Pi. Thanks to the module, it is possible to receive digital terrestrial television broadcast in the DVB-T and DVB-T2 standard. Raspberry Pi TV-uHAT

Module with 10 addressable RGB LEDs APA102C. Each of the LEDs is independently controlled via the I2C interface, and the line address is modified, so that the modules can be connected with each other. SparkFun COM-18354

ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19036

Module with IMX298 sensor that works with all versions of the Raspberry Pi. The sensor used has a 16 MP matrix and allows video recording at resolutions 4640x3472/10fps. ArduCAM B0323

Mini solenoid valve designed for water installations. It is powered by 220 V alternating voltage and can operate in the pressure range from 0 to 8 bar. PSC-2

Module with a 3-axis magnetometer based on the MLX90393 system. It has a measuring range from ± 5mT to ± 50mT and a resolution of 0.161 µT. The I2C or SPI interface is used for communication. Adafruit 4022

Switching power supply with a power of 72 W, output voltage of 12 V and current of 6 A. It has built-in overload and short-circuit protection and a low profile design. Mean Well LRS-75-12

Module with 11 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4111

ArduCAM CC3200 UNO Board CC3200 UNO is full featured development board almost like a combination of CC3200 Launchpad plus CC3200CAMBOOST pack from TI while keeping exactly the same size as Arduino UNO and pin out. B0078

Module with a button and red LED backlight. The board is equipped with a Gravity connector and communicates via a digital interface. DFRobot DFR0785-R