Category: Main categories

A pair of crocodile clip connectors, labeled as conCrocTypeB, includes two clamps in black and red colors, designed for quick and secure wire connections in electrical circuits.

Industrial router for IoT and M2M applications, equipped with dual SIM slots with automatic switching between operators. The device supports WiFi, 4G/LTE, 3G and 2G networks, as well as VPN protocols such as IPsec, OpenVPN and GRE, ensuring security and continuity of work. IP30 metal housing, five Ethernet ports (including two WAN), watchdog functions and EMC protection ensure stability and versatility in harsh industrial environments. PUSR USR-G805s

This soil moisture sensor uses a resistive measurement between two gold-plated probes. Corrosion resistance ensures long life and stable measurements. It works with the micro:bit and Arduino platforms, allowing for reading soil moisture levels as an analog signal. Adafruit 6362

The 8041BS is a 0.80-inch red 4-digit LED display with a common anode configuration. Designed for electronic devices requiring clear numerical data display.

A set of 328 colored heat shrink tubes with a diameter of 1, 2, 3, 4, 6, 8, 10 and 14 mm and a length of 40 or 80 mm.

Module with connector designed for 40-pin TFT displays. It allows for simple connection of the display and control using pin-outs with a convenient raster. Adafruit 1932

A cooling fan with dimensions of 92x92x15 mm, featuring PWM functionality and a tachometer (speed sensor), is an efficient solution for systems requiring precise temperature control

Set of flat and fork connectors. The box contains 330 connectors in three colors: red, blue and yellow. Connectors are designed for wires from 10 to 22 AWG.

32-bit MCU for automotive applications, Power Architecture (e200z0h), 576 kB Flash, LQFP100, STM, RoHS

This expansion module allows you to display the Raspberry Pi Pico display on a monitor or TV with an HDMI input. Equipped with a mini HDMI port, an HSTX interface, and a STEMMA QT/Qwiic connector, it ensures fast and stable data transfer. Compatible with Pico 1 and Pico 2, it offers resolutions up to 800x480 pixels and works with the Arduino and CircuitPython libraries. Adafruit 6363

FeatherWing module with a 2.9" e-paper display featuring a 296×128 px resolution, supporting 4 grayscale levels and based on the SSD1680 driver, designed for Feather-standard boards. Adafruit 4777

The NEO Tools 44-653 set includes a needle file holder along with a complete selection of files and blades for precise manual finishing. The dual-material handle with a quick-release mechanism enables fast accessory changes and operation in hard-to-reach areas. NEO Tools 44-653

A compact converter designed to drive LEDs in series and parallel circuits. The device generates voltages up to 40V and currents up to 400mA from a 3-5V supply, with the output current adjustable via mini DIP switches. The board features a built-in 1.2A switch, overvoltage protection, and PWM LED dimming. Adafruit 6354

The INA3221 module, which allows simultaneous measurement of voltage and current for three power supplies via I2C with ±1% precision. With a 13-bit ADC and built-in 0.05Ω shunt resistors, it allows accurate monitoring of currents up to ±3.2A and voltages up to +26VDC. Adafruit 6062

The Arducam B0463 camera with the OV7675 sensor captures images in VGA resolution and RGB/YUV format, enabling use in vision systems based on Arduino GIGA R1. Its compact design and low power consumption make it suitable for battery-powered projects and applications in robotics and IoT.

The UM7 orientation sensor from Redshift Labs is an Attitude and Heading Reference System (AHRS) that contains a three-axis accelerometer, rate gyro, and magnetometer. It combines this data using an Extended Kalman Filter to produce attitude and heading estimates.

The 10.1-inch Raspberry Pi 5-based HMI module, with 4 GB RAM, 32 GB SD card and M.2 SSD slot, offers versatility in IoT and industrial automation applications. Equipped with a Broadcom BCM2712 (Cortex-A76, 2.4 GHz) processor, dual-band Wi-Fi, Bluetooth 5.0, dual 4Kp60 HDMI output, RS232/RS485, and a 1280x800 touchscreen, it provides performance, reliability and precise operation in harsh environments. Edatec ED-HMI3020-101C-04320

A sturdy protective base made of AL6061-T6 aircraft-grade aluminum, designed for Bambu Lab P1 and X1 3D printers. It protects the bottom of the device from dust, hair, and mechanical damage, extending the life of components. Its lightweight yet durable construction and optional wheels ensure easy printer movement and stable setup. BIQU Panda Under Armor PX

JBC-C245931 is a mini-wave soldering tip with a diameter of 2.7 mm, designed for the JBC T245 handle. The integrated heater ensures fast heating and temperature stability, resulting in high efficiency when soldering through-hole components and larger solder pads.

The industrial cellular router provides 4G LTE Cat 6 connectivity, 2.4 GHz Wi-Fi, and wired Ethernet networking. Two RJ45 ports, one digital input, one digital output, and Teltonika RMS support enable integration with industrial, IoT, and remote management applications. Teltonika RUT261