Category: Main categories
Subcategories
There are 23386 products.
A single-channel DC motor controller with an I2C interface. It is powered from 1.8 V to 22 V and can deliver up to 1.8 A of current. Board with connectors for assembly. Pololu 5075
A volume sensor designed to detect loud ambient sounds. The module uses a microphone and LM2904 amplifier. The output value (analog signal) depends on the volume of the detected sound. In order to eliminate interference, the microphone signal is subjected to double filtering. Seeed studio 101020063
IMPACT PLA is an advanced technical filament that combines the advantages of traditional PLA with properties similar to ABS filaments. Thanks to this, it enables an easy and safe printing process, while ensuring increased resistance of prints to cracking, fracture and high temperatures. Fiberlogy Impact PLA Khaki
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8 ° per step), has a nominal voltage of 7.4 V, and draws a current of 0.28 A per coil. Pololu 1207
L3G4200D 3-Axis Gyro Carrier with Voltage Regulator
Solarbotics GM6 120:1 Mini Gear Motor Offset Output
A small motor with a plastic gear 120:1, operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and a maximum torque of 1.4 kg*cm. Pololu 1122
Solarbotics GM9 143:1 Gear Motor 90 deg. Output
A set for building a balancing robot. It has a board with an ATmega 32u4 microcontroller, engine controllers, modules with quadrature encoders and an IMU system (gyroscope, accelerometer, magnetometer). Pololu 3575
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 900 mA, offering a wide beam angle of 120 °
Controller module for building an arcade game dedicated to Raspberry Pi. Connectors placed on the board allow you to connect 6 momentary buttons, a joystick and a loudspeaker. Adafruit 3422
DC motor with plastic gear 1:48. Equipped with an incremental encoder with Hall sensors.
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 300 mA, offering a wide beam angle of 120 °
Universal meter UT52 UNI-T with display 3 1/2 digits, enables: measurement of direct and alternating voltage, current, resonance, diode testing, capacity measurement of capacitors. MIE0015
Uninterruptible power supply (UPS) module, allowing continued operation and safe shutdown of the device after a power failure. AC adapter included. Waveshare UPS Module 3S (EU)
Knob with an inner diameter of 6 mm for mounting on a rotary potentiometer. Black color
Knob with an inner diameter of 6 mm for mounting on a rotary potentiometer. Blue color
Qduino Mini is a tiny, Arduino-compatible board with ATmega32u4 (8MHz, 32kB Flash, 2kB RAM), a LiPol battery connector and charger built-in. SparkFun DEV-13614
The CY7C65213 USB to UART serial breakout is designed to provide users with a means to access all available I/O pins on the IC, and to provide a 6-pin UART header that is compatible with other SparkFun breakout boards. This breakout has a microUSB connector and other support circuitry to get the IC quickly up and running. BOB-13830