Category: Main categories

The adapter allows you to connect a device with USB type C slot to the HDMI port. LANBERG

Single-board computer with Samsung S3C2440 processor (ARM9)

Module with DHT20 sensor. It allows you to measure humidity in the range from 0 to 100% and temperature from -40 to 80 ℃. Seeed Studio 101020932

The module with 4 relays is designed to work with Arduino. It allows you to control devices with operating parameters up to 250VAC/7A or 30VDC/10A. Seeed Studio 103030009

The WEP 937D soldering tip station has smooth temperature control in the range from 200 ° C to 480 ° C. Thanks to the built-in temperature sensor in the heater and LED display, you can set the desired temperature very precisely. WEP 937D

Module with RGB diode and P9813 controller. It is powered with the voltage of 5 V and controlled by the I2C interface (Grove). Seeed Studio 104030006

CAM130 is a 13 MP camera module designed for FriendlyELEC single-board computers. The camera uses the MIPI CSI interface and enables capturing high-resolution images and video in embedded systems, robotics and vision-based applications.

JBC CDEB soldering station with T245 handle is an advanced tool for professionals, combining high power, precision, and ease of use. The Soldering Assistant and intelligent heat management support solder joint quality, while energy-saving modes significantly extend tip lifespan. JBC-CDE-2BQA

JBC-C210031 is a chisel-cone soldering tip with a diameter of 2.0 mm, dedicated to the JBC T210 handle. It provides high precision and fast heating, making it ideal for soldering SMD components and other precise assembly tasks.

A set of Grove modules dedicated to Arduino boards. It is an excellent addition to typical starter kits and will work well as an extension of previously created projects. Seeed Studio 110020328

The SparkFun Clock Generator 5P49V60 breaking plate offers a wide range of customizable frequencies in a wide range of different signal types with a single reference clock. Bob-15734

Ring light with 24 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-24

This stabilized 30V/5A power supply with a USB interface and 5 power profile memory enables precise powering of electronic devices in CV and CC modes. It is ideal for service, laboratories, and when designing devices requiring precise voltage or current regulation. KORAD KA3005PS

AC/DC power supply designed to power DLP projection modules, including the EKB DLP E4750 platform. The device provides a stable 19V DC output at up to 6.32A and 120W of power, ensuring reliable operation of the control systems and LED optical engine. Its adequate current capacity makes it suitable for demanding applications such as 3D scanning, machine vision, and automatic optical inspection. EKB Technologies AC-19V632AINTL

An advanced DLP projection module with a DLP4710 chip (0.47" Full HD 1080p), designed for industrial and R&D applications. The device offers projection brightness of up to 2000 lumens and a resolution of 1920 × 1080, as well as pattern generation at a frequency of up to 1440 Hz. The system uses DLPC3479 controllers and a DLPA3005 LED power and control system, ensuring stable operation of the RGB LED optical engine. The module is equipped with configurable trigger inputs and outputs enabling synchronization with cameras and measurement systems in applications such as 3D scanning, AOI, and robot vision. EKB Technologies DPM-E4750RGBHBLC2OX

Low Noise, 90 MHz, Variable Gain Amplifier, SOIC8, Analog Devices, RoHS

Module with ePaper 2.9" display and RP2040 microcontroller. Equipped with QW/ST connector. Accessories included. Pimoroni PIM610

Module with a color IPS LCD display with a diagonal of 1.47" and a resolution of 320x172 pixels. It has rounded corners and uses the ST7789 controller (SPI interface). Adafruit 5393