.png)
Category: Main categories
Subcategories
There are 23554 products.
Combination wrench with ratchet and rotation direction switch, made of high-quality CrV steel, chrome-plated, polished and induction hardened, with a ratchet with 72 teeth and a 12-point eye, length 140 mm, width of the open-end wrench 17.5 mm, width 19 mm open-end wrench, 6 mm thick open-end wrench and 7.2 mm thick open-end wrench, intended for car workshops and services. YT-1651
Finder 12.62.8.230.0000 is a weekly time switch with two 16 A contacts and the ability to be programmed both manually and via NFC. It is used for automating lighting, heating, and other timed systems in residential and industrial installations.
Finder 7M.24.8.230.0210 is a compact, bidirectional single-phase energy meter with RS-485 and NFC communication, designed for advanced energy consumption monitoring. It is used in photovoltaic installations, building automation, and energy management in distributed systems.
Finder 12.51.8.230.0000 is a digital time switch with daily and weekly programming options, designed for DIN rail mounting (35 mm width). It features a single-pole double-throw (SPDT) output with a 16 A load capacity at 250 V AC, allowing for precise control of electrical devices. Thanks to NFC technology, users can easily configure the device using a smartphone.
Finder 12.A1.8.230.0000 is a digital time switch with an astronomical function, designed for precise control of lighting and devices based on the sun\'s position. It is used in both outdoor and indoor installations where automatic control depending on daylight conditions is required.
19 mm ratchet combination wrench by Vorel 52659, made of chrome-vanadium CrV steel, with 72-tooth ratchet and chrome-plated surface. Vorel-52659
Finder 12.61.8.230.0000 is a weekly time switch with one 16 A contact, designed for automating the operation of electrical devices and systems. It offers flexible programming options and can be configured both locally and via NFC.
Combination wrench with ratchet 22 mm by Vorel 52660, made of chrome-vanadium CrV steel, with a ratchet with 72 teeth and a chrome-plated surface. Vorel-52660
14 mm ratchet combination wrench by Vorel 52656, made of chrome-vanadium CrV steel, with a 72-tooth ratchet and chrome-plated surface. Vorel-52656
The Step-Down Converter allows you to adjust the output voltage (1.5-35V) and output current (up to 10A, 8A recommended), supporting a maximum of 150W (100W recommended) with an operating temperature of -20 to 75°C and a conversion efficiency of up to 95%. It has short-circuit protection but no reverse input protection.
Evaluation Board with CN0332, Magnetoresistive (MR) Rotational Speed Sensor, Analog Devices, RoHS
Module with a button, LED diode and a white cap. DFRobot DFR0029-W
Wind speed sensor 0-70 m/s made of durable polycarbonate, offers high accuracy and fast response time. It is equipped with RS485 interface. Suitable for agricultural, meteorological and industrial applications. The set includes a sensor, cable and mounting kit.
Module with 2 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4142
Module with 3 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4443
Module with 3 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4203
USR-EG628-ETH is an industrial controller with dual Ethernet, serial ports, edge computing and PLC support, designed for local data processing in automation systems, energy management and smart buildings. It offers programming flexibility, wide protocol compatibility and the ability to integrate with visualization and cloud systems.
Module with 3 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4303