Category: Main categories

A probe tip with attenuation factor of 100X. Dedicated to Micsig probes from the SigOFIT series operating in the 500 MHz frequency band. Micsig OP100-5

ZP120.120.45UJH TM ABS - Hermetic enclosure ZP120.120.45, light-colored with ears, featuring a gasket and brass inserts, made of ABS.

The PoE splitter with DC output allows devices requiring 5 V power to be supplied through a single Ethernet cable, eliminating the need for additional power adapters. Compatible with network devices, SBCs, and IoT systems, it is suitable for industrial applications and installations in harsh environmental conditions, where reliability, safety, and a compact design are essential.

The probe tip has a 50X attenuation factor. Designed for Micsig probes from the SigOFIT series operating in the 100MHz, 200MHz and 350MHz frequency band. Micsig OP50-3

ESP32-S3 3.97" 800×480 with e-Paper display, Wi-Fi 2.4 GHz, Bluetooth 5 – development board with built-in RTC, IMU, temperature and humidity sensor, and AI voice interaction support (without battery). Waveshare ESP32-S3-ePaper-3.97-EN

The industrial PoE splitter with a USB Type-C port enables reliable 5 V power supply for network devices without the need for additional power adapters. The device is ideal for installations requiring stability, durability, and a compact form factor – including embedded systems, IP cameras, IoT gateways, and Raspberry Pi applications.

ESP32-S3 3.97" 800×480 with e-Paper display, Wi-Fi 2.4 GHz, Bluetooth 5 and Basic Kit set (3.7 V lithium battery + 16 GB TF card + card reader) – development board with built-in RTC, IMU, temperature and humidity sensor, and AI voice interaction support. Waveshare ESP32-S3-ePaper-3.97-Kit

A 20X attenuation factor probe tip. Designed for Micsig probes from the SigOFIT series operating in the 100MHz, 200MHz and 350MHz frequency bands. Micsig OP20-3

A compact 3-in-1 device combining an oscilloscope, multimeter, and signal generator, designed for electronics professionals and enthusiasts. Equipped with two 50 MHz channels, a 250 MS/s sampling rate, and a built-in 4.5-digit multimeter, it provides precise measurements of signals and electrical parameters. With a color HD screen, long-lasting battery, and data logging capabilities, it\'s an ideal tool for laboratory, service, and field use. Includes one oscilloscope probe and test leads. Fnirsi 2C53T Standard

RP2350 1.75" 466×466 with 65K color AMOLED display and capacitive touch panel, equipped with the RP2350A dual-core, dual-architecture microcontroller, 6-axis IMU sensor, RTC, audio codec with microphone, and power management system supporting a 3.7 V Li-Ion battery. The board provides SPI, I2C, UART, ADC, PWM, and USB Type-C interfaces, enabling the development of portable devices, HMI panels, and interactive embedded systems requiring high-quality display output and touch support. Waveshare RP2350-Touch-AMOLED-1.75

A probe tip with attenuation factor of 10000X. Dedicated to Micsig probes from the SigOFIT series operating in the 500 MHz frequency band. Micsig OP10000-5

A probe tip with attenuation factor of 5000X. Dedicated to Micsig probes from the SigOFIT series operating in the 500 MHz frequency band. Micsig OP5000-5

BatteryIndicator-B is a lithium battery charge level indicator for 1S-8S packs with a blue segmented LED display. It enables quick voltage level assessment based on threshold values corresponding to the number of cells

RTC clock module with a built-in Watchdog system dedicated to projects based on Raspberry Pi minicomputers. It is equipped with an advanced monitoring circuit with the CH32V003 chip, which allows for automatic reset in the event of system malfunction or freeze. Waveshare RTC Watchdog HAT (B)

RP2350 1.75" 466×466 with 65K color AMOLED display and capacitive touch panel, equipped with the RP2350A dual-core, dual-architecture microcontroller, 6-axis IMU sensor, RTC, audio codec with microphone, and power management system supporting a 3.7 V Li-Ion battery. The version with protective enclosure is designed for portable devices, HMI panels, and interactive embedded systems requiring high-quality image output and touch support. Waveshare RP2350-Touch-AMOLED-1.75-B

ZP120.120.45UJp TM ABS-PC - Plastic enclosure ZP120.120.45 with a light-colored bottom with ears, transparent top, and brass inserts, made of ABS-PC.

Development board with GW1NSR-LV4C FPGA. Offers access to 4608 LUT4 logic cells. It has a built-in JTAG debugger. The user has LED diodes and user buttons at their disposal. In addition, the board provides a camera connector and an HDMI connector. Sipeed Tang Nano 4K

A short, full-featured USB-C extension cable compliant with the USB4 V2.0 standard, offering data transfer speeds up to 80Gbps, power delivery up to 240W, and 8K video transmission at 60Hz. Version with 90° right-angle male connector. Waveshare USB-C Extension Cable (B)

The Micsig DP series differential probe is based on advanced metal shielding technology. It offers a 100 MHz frequency bandwidth and the ability to measure voltages up to 7000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP7000