Two-channel motor controller (H-bridge) with L298N
ID: 573807
5906623405978
zł56.05
Tax included
zł45.57 tax excl.
Two-channel motor controller with L298N system with 4.8 ... 46V motor power supply and 2A current capacity per channel. It has a protection in the form of diodes. DFRobot DRI0002
Description
Two-channel DC motor driver based on the L298N system. The maximum current efficiency of each channel is 2 A. The range of safe supply voltage for DC motors is 4.8 ... 46 V. The motor is controlled by means of PWM signal. The tile is small and allows for convenient use in mobile designs.
properties
- H-type double bridge L298N
- Maximum power: 25 W
- The level of the control input signal:
- High level: 2.3 V = Vin = Vss
- Low: -0.3 V = Vin = 1.5 V
- Power supply of the logic part 6 ... 12 V
- Power supply for Vs motors: 4.8 ... 46 V
- Current consumption of logical part Iss: 36 mA
- Power consumption per channel Io: 2 A
- Working temperature: -25 ... + 130 ° C
- Dimensions: 47 × 53 mm
- Weight: about 29 g
573807
Data sheet
- Output current
- 2A
- Number of channels
- 2
- Supply voltage min
- 4,8 V
- Supply voltages max
- 50 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
No product available!
No product available!
Ultra small Dual DC motor driver for some room limited projects. UVLO (Under Voltage Latch-Out) features a safe guard for your system. DRI0041
zł89.42
Delivery date unknown
No product available!
Other products in the same category (16)
HAT module with a driver for two DC motors designed for Raspberry Pi. Motors can be powered with the voltage from 6.5 to 30 V and draw a maximum current of up to 18 A. Pololu 3751
zł331.50
4 weeks
No product available!
Module with DC motor driver DRV8876. It can work with motors supplied with the voltage from 4.5 to 37 V and the current consumption up to 1.3 A. Pololu 4036
zł34.71
24h
Available quantity: 2
Available
This powerful motor controller makes closed-loop speed or position (but not both!) control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), and hobby radio control (RC).
zł450.07
24h
Available quantity: 1
Available
A two-channel DC motor controller with a I2C interface. It is powered from 1.8 V to 22 V and can deliver up to 1.6 A per motor. Board with connectors for assembly. Pololu 5079
zł73.46
24h
Available quantity: 1
Available
Pololu G2 24v19 High Power is a miniature DC motor controller. Driver\'s power supply: 6.5 ... 40V. Current efficiency of the module: 19A. The module has protection against back voltage and overvoltage. Pololu 1367
zł2,621.57
4 weeks
No product available!
Two-channel driver for DC motors with an operating voltage from 7 to 45 V and a continuous current of up to 60 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDDS60
zł758.53
24h
Available quantity: 5
Available
This Kit with fully-dedicated PWM driver chip handles all the motor and speed controls over I2C. Only two data pins (SDA & SCL in addition to the power pins GND & 5V) are required to drive the multiple motors; you can also connect any other I2C devices or shields to the same pins. This makes it drop-in compatible with any Arduino, such as the Uno, Due, Leonardo and Mega R3. Adafruit 1438
zł102.94
24h
Available quantity: 3
Available
Module with 2-channel DC motor driver. It allows you to control the drive with a supply voltage from 3 to 11 V and a current of 1.2 A (1.5 A instantaneous). I2C communication. SparkFun ROB-15451
zł112.13
3 weeks
No product available!
A4990 Dual Motor Driver Carrier
zł44.97
24h
Available quantity: 1
Available
KAmod Motor Driver is an advanced DC motor controller powered by 6-30 V, enabling power regulation using the PWM method and control of the direction of rotation, compatible with analog and PWM signals from various sources, equipped with overload and thermal protections and soft start and stop functions
zł61.91
24h
Available quantity: 261
Available
Pololu High-Power Motor Driver 24v23 CS
zł712.17
4 weeks
No product available!
A single-channel DC motor driver with an I2C interface. It is powered from 4.5 V to 48 V and can deliver up to 2.2 A of current. A board with connectors for mounting. Pololu 5061
zł80.44
4 weeks
No product available!
Dual MC33926 Motor Driver CarrierTwo-channel DC motor controller with voltage from 5 V to 28 V, power consumption up to 3 A per channel. Controlled by PWM signal. Pololu 1213
zł232.97
4 weeks
No product available!
A two-channel DC motor controller with an I2C interface. It is powered from 4.5 V to 48 V and can deliver up to 1.8 A per motor. A board with soldered connectors. Pololu 5064
zł125.29
4 weeks
No product available!
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5036
zł352.15
4 weeks
No product available!
This compact breakout board is for ROHM’s BD65496MUV motor driver, which offers an operating voltage range of 2 V to 16 V and can deliver a continuous 1.2 A to a single brushed DC motor. Pololu 2960
zł71.08
24h
Available quantity: 2
Available
Two-channel motor controller with L298N system with 4.8 ... 46V motor power supply and 2A current capacity per channel. It has a protection in the form of diodes. DFRobot DRI0002