Maker UNO X - development board with ATmega328P microcontroller + breadboard
ID: 587234
5906623405596
zł65.50
Tax included
zł53.25 tax excl.
Board compatible with Arduino, based on ATmega328P. Equipped with an area with prototype holes, a breadboard, 12 LEDs, a button and a buzzer. Cytron MAKER-UNO-X
Description
Maker UNO X is an Arduino compatible board, based on the ATmega328P microcontroller from the AVR family. There are 20 I / O lines, 6 PWM channels, 6 analog inputs and communication interfaces (UART, SPI, I2C) at the user's disposal. The CH340G system realizes communication via the USB interface. Additionally, on the shallower there are 12 LEDs, a programmable button and a built-in buzzer. The special feature of Maker UNO X is that it has a built-in prototype hole area and an attached breadboard, making it a complete prototyping tool for Arduino-based devices. A micro USB connector is used, so the board can be powered, for example, from a Power Bank. The set was designed for learning programming and electronics in schools.
Features
- Prototype area with holes with a pitch of 2.54 mm
- Contact plate
- Programmed in Arduino IDE
- ATmega328P microcontroller in SMD casing
- 0-5V outputs with 3.3V compatible inputs
- Flash memory: 32 KB
- SRAM memory: 2 KB
- EEPROM memory: 1 kB
- Clock speed: 16 MHz
- 20 digital I/O pins
- 6 PWM outputs
- 6 analog inputs
- UART, SPI, I2C interfaces
- 2 x external interrupts
- 6 pin ISP connector
- Compatible with Uno R3 Shield
- Signaling diodes for 5 V, 3.3 V, TX, RX and 12 user LEDs
- Programmable button
- Piezo buzzer
- CH340 chip realizing communication via USB
- USB Micro-B socket
- Supply voltage: USB 5V
- Voltage stabilizer 500 mA (maximum) 3.3 V
Kit contains
- Maker UNO X board
- Small contact plate
- Pin stickers set
587234
Data sheet
- Microcontroller
- ATmega328
- Core
- AVR
- Frequency
- 16MHz
- Flash memory
- 32kB
- RAM
- 2kB
- EEPROM memory
- 1kB
- Number of digital pins
- 20
- Number of PWM channels
- 6
- Ilość wejść analogowych
- 6
- ADC
- 1x 10bit
- DAC
- none
- CAN
- none
- USB
- 1
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- GSM/GPRS module
- No
- Logic voltage
- 5 V
- MicroSD slot
- No
- Supply voltage min
- 5 V
- Supply voltages max
- 5 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
zł54.89
Delivery date unknown
No product available!
The board is compatible with Arduino, based on the ATmega328P microcontroller from the AVR family, 14 I/O lines, 6 PWM channels, 6 analog inputs are available to the user. The CH340G chip communicates via a USB interface. In addition, it has 12 LEDs, a programmable button and a embedded buzzer. Cytron Uno Maker
zł41.14
24h
Available quantity: 4
Available
Board compatible with Arduino Nano. It is based on the ATmega328P microcontroller with 32 KB Flash, 2 KB SRAM and 1 KB EEPROM. It has 12 LEDs, a buzzer and a user button. Cytron Maker Nano
zł42.16
24h
Available quantity: 22
Available
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
zł4.10
24h
Available quantity: 44
Available
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
zł4.19
24h
Available quantity: 204
Available
A set of 40 pcs of male-male connecting cables in various colors, 10 cm long
zł5.49
24h
Available quantity: 271
Available
Development board with RP2040 microcontroller. Equipped with a driver for DC motors, servos and Grove connectors. Dedicated to the construction of robots. Cytron MAKER-PI-RP2040
zł62.90
24h
Available quantity: 12
Available
A set of stickers with a description of the pins dedicated to the Maker UNO plates. Cytron MAKER-UNO-STICKER
zł2.10
24h
Available quantity: 13
Available
Other products in the same category (16)
Board compatible with Arduino Nano. It is based on the ATmega328P microcontroller with 32 KB Flash, 2 KB SRAM and 1 KB EEPROM. It has 12 LEDs, a buzzer and a user button. Cytron Maker Nano
zł42.16
24h
Available quantity: 22
Available
Development board with NXP iMX RT1011 processor with ARM Cortex M7 core equipped with AirLift WiFi module. It has Arduino UNO compatible connectors and a STEMMA QT connector for I2C devices. Adafruit 4950
zł186.87
4 weeks
No product available!
Microcontroller board based on the ATmega328P
zł35.58
24h
Available quantity: 27
Available
Development board equipped with RP2040 microcontroller, RGB LED diodes, buzzer and Qwiic/STEMMA QT connectors. Pin spacing compatible with Arduino Nano. Cytron MAKER-NANO-RP2040
zł45.94
24h
Available quantity: 6
Available
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
zł54.89
4 weeks
No product available!
Development board with ATmega4809 microcontroller and Microchip ECC608 cryptographic chip. It is equipped with 6 analog input pins, 14 digital inputs/outputs (5 as PWM output) and Grove ports. Seeed Studio 102010288
zł110.24
4 weeks
No product available!
Board compatible with Arduino, equipped with the ATmega32U4 microcontroller
zł31.70
24h
Available quantity: 6
Available
Microcontroller board based on the ATmega32u4
zł36.90
4 weeks
No product available!
Module with ATmega328 microcontroller from the AVR family (32 kB Flash, 2 kB SRAM, 1 kB EEPROM). The module has 14 I/O lines, 6 PWM channels, 8 analog inputs
zł29.90
4 weeks
No product available!
Microcontroller board based on Leaf Maple, STM32F103RB, USB, RoHS
Regular pricezł125.71zł89.85
24h
Available quantity: 1
Available
The board is compatible with Arduino, based on the ATmega328P microcontroller from the AVR family, 14 I/O lines, 6 PWM channels, 6 analog inputs are available to the user. The CH340G chip communicates via a USB interface. In addition, it has 12 LEDs, a programmable button and a embedded buzzer. Cytron Uno Maker
zł41.14
24h
Available quantity: 4
Available
Microcontroller board based on the ATmega328
zł33.05
24h
Available quantity: 11
Available
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core. It has connectors and dimensions compatible with the Arduino Uno Rev3. HW-819
zł73.63
4 weeks
No product available!
Development board with ATmega328P microcontroller equipped with 14 I/O lines, 6 PWM channels, 6 analog inputs and FT231X chip. Compatible with Arduino UNO Rev3. Cytron CT-SE
Regular pricezł69.00zł48.59
24h
Available quantity: 1
Available
With Maker Uno RP2040, we bring the power of the RP2040 chip into the familiar Uno form factor. We maintain the user-friendly nature and plug-and-play features that have contributed to the popularity of the Arduino platform, while utilizing the advanced capabilities of the RP2040 to enhance its performance. Additionally, this board has been enriched with Maker series features that support the learning process and spark creativity. Cytron MAKER-UNO-RP2040
zł63.90
24h
Available quantity: 2
Available
Development board with SAMD21G18 microcontroller. It offers operating frequency up to 48 MHz, 256kB FLASH memory and 32kB SRAM.
zł62.39
4 weeks
No product available!
Board compatible with Arduino, based on ATmega328P. Equipped with an area with prototype holes, a breadboard, 12 LEDs, a button and a buzzer. Cytron MAKER-UNO-X