- New
RP2350 7-inch LCD Development Board 800x480 with touch support - Waveshare 33488
ID: 1202990
zł158.04
Tax included
zł128.49 tax excl.
Development board with RP2350 microcontroller and a 7-inch touch LCD display with 800 x 480 resolution and 65K colors, supporting dual-core and dual-architecture operation, with a capacitive touch panel. Waveshare RP2350-Touch-LCD-7
Description
Waveshare 33488 is a standalone development board based on the RP2350B microcontroller, equipped with an integrated 7-inch touch LCD display with a resolution of 800 x 480 and a color depth of 65K. The board is intended for embedded projects requiring a local graphical user interface and does not require cooperation with Raspberry Pi or any other single-board computer.
The applied RP2350 microcontroller offers a dual-core and dual-architecture design, enabling operation with ARM Cortex-M33 cores or Hazard3 RISC-V cores, with a clock frequency of up to 150 MHz. The board integrates Flash memory and PSRAM, a TF card slot, and numerous communication interfaces, allowing it to be used in control systems, HMI interfaces, measurement devices, and electronics prototyping.
The RP2350-Touch-LCD-7 version is equipped with a capacitive touch panel supporting up to 5 touch points, communicating via the I2C bus with interrupt support, enabling direct user interaction with the displayed graphical interface.
- RP2350B - dual-core and dual-architecture design, maximum operating frequency up to 150 MHz
- PIO-USB port - USB with device and host support via PIO
- USB Type-C port - for programming, USB 1.1 with device and host support
- UART header
- TF card slot
- 7-inch display panel connector
- Touch panel connector
- Sensor header
- CAN header
- I2C header
- RS485 header
- MX1.25 lithium battery header - for 3.7 V lithium battery, supports charging and discharging, charging current up to 500 mA
- Status indicators - DONE: lithium battery charging complete indicator - CHG: lithium battery charging indicator - PWR: power supply indicator
- CAN termination resistor selection
- RS485 termination resistor selection
- 16 MB Flash memory
- BOOT button - press while resetting to enter download mode
- RESET button
- 2 MB PSRAM
- Debug interface
Features
- Microcontroller
- Chip: RP2350B
- Architecture: dual-core, dual-architecture
- Supported cores: 2 x ARM Cortex-M33 or 2 x Hazard3 RISC-V
- Maximum operating frequency: up to 150 MHz
- On-chip SRAM: 520 kB
- Flash memory: 16 MB
- PSRAM memory: 2 MB
- Display
- Display type: LCD IPS
- Diagonal size: 7 inch
- Resolution: 800 x 480
- Number of colors: 65K
- Viewing angle: up to 170°
- Touch control: capacitive
- Number of touch points: up to 5
- Touch panel interface: I2C
- Touch interrupt support: yes
- Interfaces and communication
- USB: USB 1.1 with device and host support (PIO-USB)
- USB connector: USB Type-C
- Memory card slot: TF
- Communication interfaces: UART, I2C, SPI
- Industrial interfaces: CAN, RS485
- Programmable I/O: 12 PIO state machines
- Power supply
- Battery support: 3.7 V Li-Ion
- Battery connector: MX1.25
- Charging support: yes, up to 500 mA
- Power saving modes: sleep, dormant
- Additional functions
- Built-in temperature sensor
- Accurate timers and clocks
- Drag-and-drop programming via USB
- Supported languages: C/C++, MicroPython, Arduino
- Physical properties
- Product type: standalone development board
- Version: with touch panel
Kit includes
- 1x RP2350-Touch-LCD-7
- 2x HY2.0 2-pin to 2-pin male cable, approx. 10 cm
- 1x HY2.0 3-pin to 3-pin male cable, approx. 10 cm
- 2x HY2.0 4-pin to 4-pin male cable, approx. 10 cm
- 1x Mounting screws pack
1202990
Data sheet
- Microcontroller
- RP2350B
- Flash memory
- 16 MB
- Number of I/O
- 12
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- Yes
- Package
- Other
- Length
- 110,76 mm
- Width
- 192,96 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + 133 MHz cores, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. Adafruit 5302
zł44.71
4 weeks
No product available!
Raspberry Pi Pico 2W, based on the RP2350 microcontroller and has a built-in WiFi and Bluetooth communication module. Pi Pico 2W offers significantly increased performance and functionality thanks to the use of Cortex M33 and RISC-V cores, doubled SRAM memory and advanced security features, including Arm TrustZone. It is hardware and software compatible with previous models, making it an attractive choice for enthusiasts and professionals in the field of embedded systems
zł32.90
24h
Available quantity: 588
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Adafruit 4888
zł52.18
24h
Available quantity: 2
Available
Game console based on the RP2040 microcontroller from Raspberry Pi. Equipped with a 1.54" LCD display, LiPo battery and aluminum housing. It has API support that allows you to create your own games in C++ and MicroPython. Pimoroni PIM559
zł348.98
4 weeks
No product available!
Module with ePaper 2.9" display and RP2040 microcontroller. Equipped with QW/ST connector. Pimoroni PIM607
zł130.07
24h
Available quantity: 11
Available
The board with the RP2040 microcontroller in the form of a USB dongle. Equipped with Stemma QT connector, RGB NeoPixel diode, boot and reset button. Adafruit 5056
zł39.58
24h
Available quantity: 3
Available
Module with a round 1.28" IPS LCD display with a resolution of 240x240 px and RP2040 microcontroller. Equipped with an accelerometer and a gyroscope. Waveshare RP2040-LCD-1.28
zł77.05
24h
Available quantity: 9
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. Soldered connectors. KApico RP2040
zł19.90
24h
Available quantity: 65
Available
Versatile digital video module. It uses two RP2040 chips (one in the form of a Raspberry Pi Pico W board and the other as a separate RP2040 microcontroller) and is equipped with an HDMI output connector. Pimoroni PIM674
zł244.45
24h
Available quantity: 2
Available
Board with RP2040 microcontroller equipped with two ARM Cortex-M0+ 133 MHz cores, 264 kB RAM. There is also 2 MB of QSPI flash memory on the board. The circuit can be programmed in C/C++, CircuitPython or MicroPython. SB Components 26531
zł30.50
24h
Available quantity: 3
Available
Development kit with RP2040 microcontroller equipped with two ARM Cortex-M0 + cores that work at 133 MHz, 264 kB RAM. The board has a QVGA camera, LCD display, IMU system and a microphone. ArduCAM B0302
zł138.13
4 weeks
No product available!
Module with a 1.14" IPS LCD display with a resolution of 240x135 px and a monochrome HM01B0 camera. Equipped with an RP2040 microcontroller. Waveshare PICO-Cam-A
zł81.73
4 weeks
No product available!
The RP2350-Plus-M offers the flexibility and performance required in modern embedded projects while maintaining full compatibility with Raspberry Pi Pico and its extensions. Factory-soldered headers and built-in Flash memory make the module suitable for rapid prototyping as well as educational and commercial applications.
zł29.15
24h
Available quantity: 6
Available
An enhanced version of the Raspberry Pi Pico 2 with access to all 48 GPIO pins and an RP2350B microcontroller (Cortex-M33 or RISC-V) clocked at up to 150 MHz. It offers 16 MB of Flash, 8 MB of RAM, and a microSD card reader, making it ideal for complex embedded and IoT projects. With USB-C, Qwiic/Stemma Qt, UEXT connectors, and BOOT/RESET buttons, it offers high flexibility and easy integration with peripherals. Olimex RP2350-PICO2-XXL
zł58.90
24h
Available quantity: 2
Available
RP2350-GEEK is an advanced diagnostic and development platform for electronics designers. It enables convenient debugging of ARM microcontrollers, testing of I2C and UART peripherals, and data visualization on a color display. Thanks to its compact enclosure and set of interfaces, it is an excellent tool for learning, prototyping, and embedded project development.
zł48.54
4 weeks
No product available!
Board with RP2040 microcontroller and W5100S network chip. The module is equipped with an Ethernet connector. WIZnet W5100S-EVB-Pico
zł55.77
24h
Available quantity: 12
Available
Development board with RP2350 microcontroller and a 7-inch touch LCD display with 800 x 480 resolution and 65K colors, supporting dual-core and dual-architecture operation, with a capacitive touch panel. Waveshare RP2350-Touch-LCD-7