AMOLED Display 1.75" 466×466 with RP2350, Touch, IMU, GPS (without enclosure) - Waveshare 33759
ID: 1203596
zł184.16
Tax included
zł149.72 tax excl.
RP2350 1.75" 466×466 with 65K color AMOLED display and capacitive touch panel, equipped with the RP2350A dual-core, dual-architecture microcontroller, 6-axis IMU sensor, RTC, audio codec with microphone, and integrated LC76G GPS module. The board provides SPI, I2C, UART, ADC, PWM, and USB Type-C interfaces, and includes a ceramic GNSS antenna in the set, enabling the development of portable HMI devices and embedded systems with positioning functionality. Waveshare RP2350-Touch-AMOLED-1.75-G
Description
RP2350-Touch-AMOLED-1.75-G provides a compact development platform featuring a 1.75" AMOLED display with 466 × 466 px resolution and a capacitive touch panel, delivered in the version without protective enclosure and with a GNSS antenna included. The RP2350A microcontroller designed by Raspberry Pi adopts a dual-core, dual-architecture concept, allowing operation with either two ARM Cortex-M33 cores or two Hazard3 RISC-V cores at up to 150 MHz.
The AMOLED panel supports 65K colors, brightness up to 700 cd/㎡, and a 100000:1 contrast ratio. The CO5300 display driver communicates via QSPI, while the CST9217 touch controller uses I2C, reducing GPIO usage. AMOLED technology ensures high contrast, a wide 178° viewing angle, and fast response for user interface applications.
The board integrates a 6-axis QMI8658 IMU including a 3-axis accelerometer and a 3-axis gyroscope, a PCF85063 RTC chip, ES8311 audio codec, onboard microphone, and an MX1.25 speaker connector for an 8 Ω 2 W speaker. The construction is delivered without protective enclosure and with a GNSS antenna included in the set. The AXP2101 power management IC supports charging and control of a 3.7 V Li-Ion battery via an MX1.25 2PIN connector, enabling portable operation.
The GPS version integrates the LC76G GNSS module, and the included ceramic GNSS antenna connects via the IPEX 1 connector, allowing positioning and time synchronization applications. The board provides a USB Type-C port with USB 1.1 device and host support, drag-and-drop programming via USB mass storage, and interfaces including SPI, I2C, UART, ADC, PWM, and programmable PIO state machines. Support for C/C++, MicroPython, and Arduino simplifies integration into various development environments.
- RP2350A - Dual-core and dual-architecture design, up to 150 MHz operating frequency
- Debug interface
- PCF85063 - RTC chip
- PWM button - for system power supply ON/OFF, supports custom function
- MX1.25 2PIN speaker header - for connecting 80 2W speaker
- MX1.25 Lithium Batt header - for 3.7V Lithium Batt, supports charging, discharging, and adjustable charging current
- Microphone - Audio capture
- ES8311 - Low-power audio codec chip
- Type-C port - for downloading programs, USB 1.1 with device and host support
- Onboard IPEX 1 GPS connector - for connecting GPS antenna
- AXP2101 - highly integrated power management chip
- 2.54mm pitch 8PIN female header - for easy external debugging or sensor connection
- QMI8658 - 6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer
- PSRAM interface - compatible with mainstream PSRAM chips for user expansion and upgrades
- BOOT button - press it when resetting to enter download mode
- TF Card slot
Features
- Microcontroller
- Chip: RP2350A
- Architecture: dual-core, dual-architecture ARM Cortex-M33 or Hazard3 RISC-V
- Operating frequency: up to 150 MHz
- SRAM: 520 KB
- Flash memory: 16 MB
- PSRAM interface: expansion pads available
- AMOLED display
- Diagonal: 1.75"
- Resolution: 466 × 466 px
- Colors: 65K
- Brightness: 700 cd/㎡
- Contrast ratio: 100000:1
- Viewing angle: 178°
- Interface: QSPI
- Driver IC: CO5300
- Touch: capacitive
- Touch controller: CST9217 via I2C
- Sensors and RTC
- IMU: QMI8658 6-axis (3-axis accelerometer, 3-axis gyroscope)
- RTC: PCF85063
- Temperature sensor: built into the microcontroller
- Audio
- Audio codec: ES8311
- Microphone: onboard
- Speaker connector: MX1.25 for 8 Ω 2 W
- GPS and GNSS
- GNSS module: LC76G (integrated)
- Antenna connector: IPEX 1
- GNSS antenna: ceramic, included
- Interfaces
- USB: Type-C, USB 1.1 device and host
- SPI: 1
- I2C: 2
- UART: 2
- ADC: 4 × 12-bit
- PWM: 5 channels
- PIO: 12 programmable state machines
- TF slot: microSD
- Debug header: 2.54 mm pitch pins
- Power supply
- Battery connector: MX1.25 2PIN for 3.7 V Li-Ion
- Power management IC: AXP2101
- Low-power modes: sleep, dormant
Kit includes
- RP2350-Touch-AMOLED-1.75-G (without enclosure) ×1
- 8 Ω 2 W speaker ×1
- Ceramic GNSS antenna ×1
1203596
Data sheet
- Microcontroller
- RP2350A
- Flash memory
- 16 MB
- Number of I/O
- 12
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- Yes
- Length
- 48.96 mm
- Width
- 48.96 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
RP2350 1.75" 466×466 with 65K color AMOLED display and capacitive touch panel, equipped with the RP2350A dual-core, dual-architecture microcontroller, 6-axis IMU sensor, RTC, audio codec with microphone, and power management system supporting a 3.7 V Li-Ion battery. The version with protective enclosure is designed for portable devices, HMI panels, and interactive embedded systems requiring high-quality image output and touch support. Waveshare RP2350-Touch-AMOLED-1.75-B
zł160.02
Delivery date unknown
No product available!
RP2350 1.75" 466×466 with 65K color AMOLED display and capacitive touch panel, equipped with the RP2350A dual-core, dual-architecture microcontroller, 6-axis IMU sensor, RTC, audio codec with microphone, and power management system supporting a 3.7 V Li-Ion battery. The board provides SPI, I2C, UART, ADC, PWM, and USB Type-C interfaces, enabling the development of portable devices, HMI panels, and interactive embedded systems requiring high-quality display output and touch support. Waveshare RP2350-Touch-AMOLED-1.75
zł143.93
Delivery date unknown
No product available!
Other products in the same category (16)
A scaled-up, fully functional version of the Raspberry Pi Pico 2, designed for learning, demonstrations, and educational workshops. The board is based on the modern RP2350 microcontroller with two Arm Cortex-M33 or RISC-V Hazard3 cores clocked at up to 150 MHz, 520 KB of SRAM, and 4 MB of Flash memory. Large pads and holes allow for solderless connection of components using alligator clips. Pimoroni PIM747
zł115.98
4 weeks
No product available!
An educational platform based on the modern RP2350 microcontroller with two Arm Cortex-M33 cores up to 150 MHz, 520 KB of SRAM, and 16 MB of Flash memory. It features a 2.8" color IPS display with a resolution of 320 × 240 px, six user buttons, a piezo speaker, and a mini breadboard for solderless prototyping. Numerous GPIO pins, ADCs, servo connectors, alligator clips, and two Qw/ST ports enable quick connection of sensors and actuators. Pimoroni PIM744
zł437.60
4 weeks
No product available!
An educational platform based on the modern RP2350 microcontroller with two Arm Cortex-M33 cores up to 150 MHz, 520 KB of SRAM, and 16 MB of Flash memory. It features a 2.8" color IPS display with a resolution of 320 × 240 pixels, six user buttons, a piezo speaker, and a mini breadboard for solderless prototyping. Numerous GPIO, ADC, servo connectors, alligator clips, and two Qw/ST ports enable quick connection of sensors and actuators. Pimoroni PIM720
zł247.27
4 weeks
No product available!
This Raspberry Pi Pico development board is based on the RP2350B microcontroller with dual Arm Cortex-M33 cores running at up to 150 MHz. It offers 520 KB of SRAM, 16 MB of Flash, and 8 MB of PSRAM, making it ideal for memory-intensive projects. It features a USB-C connector, a Qw/ST port for I2C sensors, an SP/CE connector, an SWD debug interface, and reset and boot buttons. Pimoroni PIM724
zł87.15
24h
Available quantity: 2
Available
Pimoroni Tiny 2350 PIM766 in the Headered version is a compact development board with the RP2350A, 4 MB of flash memory and a USB-C connector, created for miniature projects. Thanks to the integrated pins, support for MicroPython and the Qw/ST port, it works well in prototyping portable devices and wearables.
zł79.00
24h
Available quantity: 2
Available
Pimoroni Tiny 2350 PIM766 is a compact board with an RP2350A microcontroller, 4 MB of flash memory and a USB-C connector, dedicated to projects requiring small dimensions. Thanks to the castellated pads it works well for PCB integration, and compatibility with MicroPython and the Qw/ST connector facilitates quick prototyping.
zł57.07
24h
Available quantity: 1
Available
A compact development board based on the RP2350B microcontroller with dual Arm Cortex-M33 cores running at up to 150 MHz, designed for projects requiring a high pin count in a minimal footprint. It offers 520 KB of SRAM, 16 MB of Flash, and 8 MB of PSRAM, as well as 48 GPIO lines, including 8 ADC inputs, arranged in a 2.54 mm pin grid array. The lack of onboard USB, LEDs, or buttons limits the board\'s size to 25.4 x 25.4 mm, giving you complete freedom in designing your own electronics. Pimoroni PIM722
zł65.36
24h
Available quantity: 2
Available
Addressable LED strip controller based on the RP2350A microcontroller with dual Arm Cortex-M33 cores up to 150 MHz. It supports popular WS2812/Neopixel and APA102/Dotstar LEDs and allows for powering and programming via USB-C with current up to 3A. It features screw-type LED connectors, a built-in RGB LED, user-friendly buttons, and a Qw/ST connector for connecting I2C sensors. The kit includes a Star Wire LED strip and a USB-C cable. Pimoroni PIM743
zł240.72
4 weeks
No product available!
Addressable LED strip controller based on the RP2350A microcontroller with dual Arm Cortex-M33 cores up to 150 MHz. It supports popular WS2812/Neopixel and APA102/Dotstar LEDs and allows for powering and programming via USB-C with current up to 3 A. It features screw-type LED connectors, a built-in RGB LED, user buttons, and a Qw/ST connector for connecting I2C sensors. Pimoroni PIM723
zł87.15
24h
Available quantity: 2
Available
This Raspberry Pi RP2350B microcontroller development board features a dual-core ARM Cortex-M33 or Hazard3 RISC-V processor. It features a 2.8-inch 480x480 circular IPS display with a capacitive touchscreen and LVGL support. It includes 16MB of flash memory, a real-time clock, a 6-axis motion sensor, a microSD slot, and a lithium battery connector. It\'s ideal for HMI, IoT, and smart wearable device projects. Waveshare RP2350-Touch-LCD-2.8C
zł170.12
24h
Available quantity: 2
Available
A compact and powerful development board featuring the RP2350B microcontroller, featuring a dual-core ARM Cortex-M33 processor and Hazard3 RISC-V processor. It features 520 KB of SRAM, 16 MB of Flash, expandable with PSRAM, a DVI connector, a PIO-USB port, a microSD slot, and a 40-pin GPIO header. The board supports SPI, I2C, UART, and USB communication, and offers 12 programmable state machines (PIOs) and an on-board temperature sensor. Waveshare RP2350-PiZero
zł49.85
6 weeks
No product available!
Miniature KAmod RP2040 module with Raspberry RP2040 microcontroller and 16 MB flash memory provides high computing performance in a compact format. Suitable for educational, hobbyist, and prototyping applications of devices with USB, I2C, SPI, and UART communication.
zł22.21
24h
Available quantity: 181
Available
Development board based on the RP2350A microcontroller featuring a unique dual-core, dual-architecture design (Arm Cortex-M33 + Hazard3 RISC-V), an onboard 6-axis sensor, and an 8×8 RGB LED matrix for IoT, robotics, and interactive systems. Waveshare RP2350-Matrix
zł171.17
24h
Available quantity: 5
Available
RP2350B-Plus-W is an advanced development board with an RP2350B microcontroller and wireless Wi-Fi/Bluetooth communication, enabling selection between ARM and RISC-V architectures. Intended for educational applications, IoT device prototyping, and projects requiring versatile communication and processing capabilities.
zł56.42
24h
Available quantity: 3
Available
This development board is based on the Raspberry Pi RP2350 microcontroller with an Arm Cortex-M33 or RISC-V Hazard3 core. It offers 2.4/5 GHz Wi-Fi, Bluetooth 5.0, and 8 MB of Flash memory, delivering high performance in a compact form factor. With a USB-C port and full Pico W compatibility, it\'s ideal for IoT projects, home automation, and learning to program. Elecrow RP2350 Pico W5 Board
zł55.18
24h
Available quantity: 9
Available
This modern development board features a dual-core Cortex-M33 microcontroller clocked at 150 MHz, 520 KB of RAM, and 8 MB of QSPI Flash. It features a rich set of interfaces, including I2C, SPI, UART, 24 PWM channels, and an HSTX port for high-speed differential data transfer. The board features a STEMMA QT connector, a built-in 200 mA+ LiPo charger, a USB-C port with a UF2 bootloader, and NeoPixel LEDs and a red LED for signaling. The Feather RP2350 is compatible with MicroPython, CircuitPython, Arduino, and C/C++. Adafruit 6000
zł63.04
24h
Available quantity: 2
Available
RP2350 1.75" 466×466 with 65K color AMOLED display and capacitive touch panel, equipped with the RP2350A dual-core, dual-architecture microcontroller, 6-axis IMU sensor, RTC, audio codec with microphone, and integrated LC76G GPS module. The board provides SPI, I2C, UART, ADC, PWM, and USB Type-C interfaces, and includes a ceramic GNSS antenna in the set, enabling the development of portable HMI devices and embedded systems with positioning functionality. Waveshare RP2350-Touch-AMOLED-1.75-G