Wio RP2040 mini - board with RP2040 microcontroller and WiFi
ID: 587079
5906623416110
zł61.34
Tax included
zł49.87 tax excl.
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which operate at a frequency of 133 MHz and 264 kB RAM. The additional ESP8285 system allows communication in the WiFi network. Seeed Studio 102991555
Description
The board is equipped with the RP2040 microcontroller designed by the Raspberry Pi foundation. The system has two ARM Cortex M0+ cores operating at a frequency of 133 MHz and 264 KB of RAM. The microcontroller is not equipped with flash memory, but on the board there is an external memory with a capacity of 2 MB connected via the QSPI interface.
RP2040 has been closed in the form of a certified module with the ESP8285 system, which allows communication in the WiFi network. All the I/O pins of the RP2040 microcontroller are led out on both sides of the board. It offers numerous interfaces, including 28 GPIO pins (19 pins supports PIO and PWM), 2 x UART, 4 x ADC, 2 x SPI, 2 x I2C as well as a user LED and a USB Type-C connector for power supply and module programming.
The development board is fully compatible with the Thonna code editor, which allows you to control devices using the MicroPython language. Besides, Pplatforma supports popular C/C++ programming languages. Thanks to its small dimensions and WiFi communication, it will be perfect for IoT projects. Full documentation with numerous examples is available on the product page.
Features
- RP2040 Raspberry Pi microcontroller with Dual Cortex M0 + core, up to 133 MHz, 264 kB built-in SRAM and 2 MB QSPI flash memory
- Built-in USB-C connector for programming
- USB 1.1 host/device functionality
- 20 x multi-functional GPIO pins
- 2.4 GHz wireless connectivity:
- IEEE802.11 b / g / n support
- Support 2.4 to 2.4835 GHz
- Ap & Station mode support
- Boot and RESET button
- Power and user LEDs (GP13)
- Power supply:
- 5V via USB-C port (default)
- VIN (5V to 3.6V) and GND pins
- Dimensions: 25.8 x 45.5 mm
- Support for MicroPython and C/C++ programming languages
587079
Data sheet
- Microcontroller
- RP2040
- Flash memory
- 2 MB
- Number of I/O
- 20
- Ethernet
- none
- WiFi/BT module
- Yes
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 25,8 mm
- Width
- 45,5 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cable with USB typ A and USB typ C connectors, cable length 0.5 m. LANBERG
zł4.26
24h
Available quantity: 21
Available
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
zł5.71
24h
Available quantity: 14
Available
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
zł5.61
24h
Available quantity: 37
Available
Other products in the same category (16)
The RP2040 microcontroller board features two 133 MHz ARM Cortex-M0+ cores and 264 kB of RAM. The board also includes 2 MB of QSPI Flash memory. The chip can be programmed in C/C++, CircuitPython or MicroPython. DFRobot DFR0959
zł45.88
24h
Available quantity: 6
Available
A kit containing an LED strip driver module and WS2812/Neopixel tape. Designed to easily and quickly create animations using popular RGB LED strips. Pimoroni PIM657
zł176.82
24h
Available quantity: 5
Available
The RP2040 microcontroller board features two ARM Cortex-M0+ cores that operate at 133 MHz. It has 264 kB of RAM, and the board also includes 16 MB of QSPI Flash memory. The chip can be programmed in C/C++ or MicroPython. Board with connectors. Waveshare RP2040-Plus-16MB-M
zł53.80
24h
Available quantity: 2
Available
The RP2040 microcontroller board features two ARM Cortex-M0+ cores that operate at 133 MHz. It has 264 kB of RAM, and the board also includes 16 MB of QSPI Flash memory. The chip can be programmed in C/C++ or MicroPython. Waveshare RP2040-Plus-16MB
zł27.64
24h
Available quantity: 2
Available
NeoPixel 8-channel RGB LED driver. It features an RP2040 microcontroller with two ARM Cortex-M0+ cores, 264 kB of RAM and 8 MB of external Flash memory. Adafruit 5650
zł82.37
24h
Available quantity: 3
Available
Board with RP2040 microcontroller and W6100 network chip. The module is equipped with an Ethernet interface. WIZnet W6100-EVB-Pico
zł55.79
5 weeks
No product available!
Raspberry Pi Pico W soldered board module dedicated to matrix displays with HUB75 interface. Pimoroni PIM662
zł106.76
4 weeks
No product available!
A board with an RP2040 microcontroller and a radio module operating in the 868 MHz frequency band. It has a built-in LiPo charging circuit and a STEMMA QT connector. Adafruit 5712
zł121.44
24h
Available quantity: 3
Available
A board with an RP2040 microcontroller and a LoRa RF95 module operating in the 868 MHz frequency band. It has a built-in LiPo charging circuit and STEMMA QT connector. Ideal for IoT projects. Adafruit 5714
zł175.46
24h
Available quantity: 3
Available
Board with RP2040 microcontroller and HDMI video connector. Has a built-in LiPo charging circuit and STEMMA QT connector. Allows the use of the Feather module to display data on a monitor. Adafruit 5710
zł85.77
24h
Available quantity: 4
Available
The RP2040 microcontroller board features two ARM Cortex-M0+ cores running at 133 MHz, 264 kB of RAM. The board also features 2 MB of QSPI flash memory and an FPC connector. It comes with a USB adapter. Waveshare RP2040-Tiny-Kit
zł25.03
24h
Available quantity: 8
Available
The RP2040 microcontroller board features two ARM Cortex-M0+ cores running at 133 MHz, 264 kB of RAM. The board also features 2 MB of QSPI flash memory and an FPC connector. The chip can be programmed in C/C++ or MicroPython. Waveshare RP2040-Tiny
zł19.68
24h
Available quantity: 20
Available
A 1.28" circular IPS LCD display module with touch panel. It has a resolution of 240x240 px and is controlled by an RP2040 microcontroller. It is equipped with an accelerometer and a gyroscope. Waveshare RP2040-Touch-LCD-1.28
zł96.67
24h
Available quantity: 5
Available
Ethernet module with RP2040 microcontroller. It has an embedded CH9120 chip with an integrated TCP/IP protocol stack. The chip can be programmed in C/C++ or MicroPython. Waveshare RP2040-ETH
zł54.00
4 weeks
No product available!
Board with RP2040 microcontroller and MCP2515 CAN controller. It has a built-in LiPo charging circuit and a STEMMA QT connector. It allows you to add communication based on the CAN bus to the project, commonly used in projects related to robotics and the automotive industry. Adafruit 5724
zł93.95
24h
Available quantity: 4
Available
Board with RP2040 microcontroller and class D mono audio amplifier based on MAX98357 chip. It has a built-in LIS3DH three-axis accelerometer, an RGB NeoPixel LED, a LiPo charging circuit, and a STEMMA QT connector. Adafruit 5768
zł122.47
24h
Available quantity: 7
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which operate at a frequency of 133 MHz and 264 kB RAM. The additional ESP8285 system allows communication in the WiFi network. Seeed Studio 102991555