Best sellers
There are 16476 products.
The 6-55V 200W Step-Up Converter Module is a device that converts a DC input voltage (6-35V) to a higher DC output voltage (6-55V) with a maximum input power of 200W, a maximum input current of 10A and a maximum output current of 7A. It offers a high conversion efficiency of up to 97.6% and it is recommended to keep a margin when operating for long periods to avoid overheating.
The RP2040 microcontroller board features two ARM Cortex-M0+ cores that operate at 133 MHz. It has 264 kB of RAM, and the board also includes 16 MB of QSPI Flash memory. The chip can be programmed in C/C++ or MicroPython. Board with connectors. Waveshare RP2040-Plus-16MB-M
Soldering set, which includes: soldering iron, tin, sucker and stand for soldering iron
Green mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070023
Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 15 V and a maximum input of up to 2 A. Pololu 4946
ESP32-S3-Touch-LCD-1.47-M is a compact development board with an ESP32-S3 and a 1.47" IPS touchscreen display, combining high computing performance with a ready set of interfaces and connectors. With factory-soldered pin headers, it is ideal for rapid prototyping of IoT, AIoT, and HMI interface applications.
Switching power supply with a power of 50 W, output voltage of 12 V and current of 4.2 A. It has built-in overload and short-circuit protection and a low profile design. Mean Well LRS-50-12
A small module with a temperature sensor (thermistor). As the temperature changes, the resistance of the thermistor changes, which allows the temperature to be measured in the range from -40 to 125 ° C with an accuracy of 1.5 ° C. The module has a connector in accordance with the Grove standard. Seeed studio 101020015
Switch-mode power supply with a power of 110 W, an output voltage of 5 V and a current of 22 A. It has built-in protection against overload, overheating and short circuit and a low profile design. Mean Well LRS-150F-5
Compact oscilloscope with 2.8” HD screen, 10 MHz bandwidth and 48 MSa/s sampling, ideal for diagnostics and education. It offers AUTO mode, various trigger modes and a signal generator function up to 50 kHz. Built-in 1000 mAh battery provides up to 4 hours of mobile operation. Fnirsi DSO510
A 24-channel input/output port expander module controlled by an I2C interface. It was based on the CH423 chip and equipped with a Gravity connector. DFRobot DFR0979
The USB Step-Up 12V 6W converter module converts the input voltage in the range of 4.2-5.2V to a constant output voltage of 12V, with a maximum current of 0.5A and a conversion efficiency of 96%. The device can operate in a wide temperature range, from -40°C to 85°C, which makes it ideal for powering various electronic devices in harsh environments.
A push-button module with RGB LED backlighting. The board is equipped with a Gravity connector and communicates via an I2C interface. DFRobot DFR0991
I2C multiplexer module with TCA9548A system. Allows you to connect up to 8 devices. The system works like a gateway - it transmits I2C interface data to one of the 8 main busses. This allows you to connect up to 8 devices with the same address. DFRobot DFR0576
ToF camera module dedicated to Raspberry Pi and NVIDIA Jetson minicomputers. Thanks to the built-in Time of Flight sensor, it allows you to create a three-dimensional image and measure the distance to objects in the field of view. ArduCAM B0410
RA4M1-Zero is a compact development board with an RA4M1 microcontroller, integrated USB interface, encryption support, and analog-digital peripherals. Designed for SMT mounting, it is suitable for serial solutions and projects requiring limited space.
Switching power supply with a power of 35 W, output voltage of 5 V and current of 7 A. It has built-in overload and short-circuit protection and a low profile housing. Mean Well LRS-35-5
The QFN8 adapter is a universal design equipped with two QFN8 sockets for 6x5mm and 8x6mm ICs marked QFN8, MLF8, MLP8, WSON8, DFN8.