Best sellers

Adapter with a set of connectors specific to the Raspberry Pi 3 Model B/B+. It allows you to adapt the Raspberry Pi CM4 modules to projects based on Pi 3 model B/B+. Waveshare CM4-to-Pi3-Adapter-B

Quectel M66 is a compact GSM/GPRS module in an LCC package with support for voice transmission, Bluetooth, and OpenCPU, designed for IoT, remote monitoring, and M2M systems. It enables easy integration in devices with limited space and low power consumption.

Camera module with OV5640 sensor with a resolution of 5 MP. Equipped with auto focus and flash LED, it communicates via the SCCB interface. Waveshare OV5640 Camera Board (C)

Quartz low resonator (HC49S), frequency 14,745MHz, RoHS

Digital IR distance sensor operating on the basis of a modulated signal with a frequency of 38 kHz. It can detect objects at a distance of up to 60 cm and is powered with a voltage from 4.5 to 5.5 V. Cytron MAKER-OBJECT

A tester for 1.5V and 9V batteries, which does not require a power supply, allows a simple assessment of the battery condition by touching the poles with the metal terminals, with the measurement results under load indicating green (GOOD), yellow (LOW) and red (REPLACE, RECHARGE) fields, compact and easy to store. Sthor-81700

Module with 2-channel DC motor driver DRV8833 designed to work with the Raspberry Pi Pico. It can work with a voltage from 2.7 to 10.8 V and a current of up to 1.2 A. Pimoroni PIM617

Universal diamond disc for angle grinders with a continuous turbo segment, 7 mm high, recommended for cutting ceramics, concrete, bricks, stone, limestone, reinforced concrete and granite, intended for wet or dry operation, with recommended speed of approximately 12,000 rpm min. Sthor-08791

Diamond disc for angle grinders, intended for dry operation, recommended for cutting ceramics, concrete, stone and brick, equipped with segments 7 mm high and 2.4 mm thick, with recommended revolutions of approximately 6600/min. Sthor-08783

The module with connectors is dedicated to the Arduino Portenta boards. It helps in prototyping and testing connections. Arduino ASX00031

Diamond disc for angle grinders, intended for dry operation, recommended for cutting ceramics, concrete, stone and brick, equipped with segments 7 mm high and 2.3 mm thick, with recommended revolutions of approximately 8400/min. Sthor-08782

Soldering tip ET C mounted on a heater. Fits Weller LR 21, WEP 70 and FE 50 soldering irons.

The YATO YT-6022 universal diamond blade with a diameter of 115 mm, made of 65Mn steel and equipped with high-quality diamond segments, is an excellent tool for fast and precise cutting of hard building materials, both dry and wet. Yato YT-6022

The ultrasonic distance sensor modUS-015 is based on the analysis of the delay of reflection of the ultrasonic wave from the obstacle - the range of the sensor from 2 to 400 cm with an accuracy of 0.3 cm + 1%

Diamond disc for angle grinders with a diameter of 125 mm and a mount of 22.2 mm, with laser-welded segments of 8 mm high, intended for dry operation when cutting hardened concrete, brick, silicate brick, granite, masonry and stone, with a maximum speed of 11,000 /min and a linear speed of 80 m/s. YT-6003

Compact programmer module for STM32 microcontrollers for soldering into a board. Supports JTAG/SWD interfaces. STLINK-V3SET has a virtual COM port and interfaces SPI, I2C, CAN, GPIO for programming via bootloader. STMicroelectronics STLINK-V3MODS

Module with the WM8960 audio codec, which allows you to operate 1 W stereo speakers and two microphones via the I2S interface. Waveshare WM8960 Audio HAT

STM32 Nucleo development board for STM32 F0 series - with STM32F072RBT6 MCU, 128KB flash memory, STM, RoHS

The Vorel brand glass and tile drill with a diameter of 4 mm, made of high-quality steel and sintered carbide, with a cylindrical mounting handle, is intended for drilling in glass and soft ceramic products. Vorel-05540