ArduCAM USB Camera Shield
ID: 567504
5906623403059
zł335.14
Tax included
zł272.47 tax excl.
Arducam USB shield is a module that allows you to connect some ArduCam cameras to a PC or minicomputers, eg Raspberry Pi, BeagleBone etc. The module supports most cameras with a serial interface that have a resolution of 0.3 ... 14 MPix. Attached to the module are appropriate libraries that facilitate image processing, eg using OpenCV software. ArduCam B0095
Description
Arducam USB shield is a module that allows you to connect some ArduCam cameras to a PC or minicomputers, eg Raspberry Pi, BeagleBone etc. The module supports most cameras with a serial interface that have a resolution of 0.3-14 MPix. Attached to the module are appropriate libraries that facilitate image processing, eg using OpenCV software. The SDK is integrated with the Python language.
The module works with the following camera modules:
properties
- The module will enable connection of ArduCam series cameras to a PC or a mini computer, eg Raspberry Pi or BeagleBone.
- 22 pin camera connection connector (primary camera interface)
- Connecting the camera with a 30-wire tape (secondary camera interface)
- It uses the USB2.0 interface for communication with a computer
567504
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Monochrome camera module 10 Mpx with sensor MT9J001 / MT9J003 designed for use with the ArduCam USB Shield module. Lens LS-18023M12. Support for video recording 1080p @ 30fps and VGA @ 60fps. Arducam 10MP: MT9J001 / MT9J003
zł279.58
24h
Available quantity: 3
Available
The camera module is based on a CMOS sensor - AR0134. It has a resolution of 1280 x 960 px (1.2 MPx). The module supports recording of video sequences: 1280 x 960 @ 54fps and 1280 x 720 @ 60Ffps. Intended for use only with the ArduCam USB Shield module. Arducam B0100
zł467.78
Delivery date unknown
No product available!
Set with a 48 MP camera equipped with an IMX586 sensor. Equipped with digitally controlled focus. Included with a USB 3.0 adapter and cable. ArduCAM EK032
zł2,099.00
Delivery date unknown
No product available!
Other products in the same category (16)
ArduCAM 12MP IMX477 Motorized Focus High Quality Camera - camera with IMX477 sensor for Raspberry Pi
Camera with IMX477 sensor with a resolution of 12.3 MPx designed for minicomputers Raspberry Pi. Equipped with focus controlled by the I2C interface. ArduCAM B0272
zł422.11
24h
Available quantity: 4
Available
Camera module with Sony IMX219 sensor designed for Raspberry Pi 5 users. It offers a resolution of 8 MP (3280 x 2464 pixels) and a wide viewing angle of 120°. Comes with FPC CSI tape. Waveshare Pi5-IMX219-120
zł77.61
24h
Available quantity: 2
Available
Module with a 2 MP camera equipped with an IMX390 sensor. It has a built-in manually adjustable focus. The set includes a USB 3.0 adapter, a tripod and a cable. ArduCAM B0476
zł1,049.01
4 weeks
No product available!
Camera with a resolution of 2 MPx with a USB interface. Equipped with a CMOS IMX291 sensor with an ultra-wide lens with a viewing angle of 160°, a microphone and a case. ArduCAM UB020201
zł309.70
4 weeks
No product available!
Arducam UB0240 with Sony IMX179 sensor offers 8 MP image at 30 fps and autofocus, ensuring high-quality capture in industrial, educational, and hobby applications. Thanks to UVC compliance and support for multiple operating systems, it can be easily integrated with computers and embedded devices.
zł202.58
24h
Available quantity: 1
Available
A set with a 64 MP camera and an adapter enabling the transmission of the CSI signal via an HDMI cable. Designed for Raspberry Pi and Jetson Nano minicomputers. The adapter module is also equipped with an audio connector and allows you to connect a microphone and headphones. ArduCAM B0399B0091
zł326.54
24h
Available quantity: 1
Available
Camera with USB interface with 16MP resolution. Equipped with a Sony CMOS IMX298 sensor and a wide-angle lens with a viewing angle of 105°. ArduCAM B0268
zł342.52
24h
Available quantity: 5
Available
Module with 8 Mpx camera with IMX219 sensor and lens with 75° viewing angle. Designed for Nvidia Jetson Nano and Raspberry Pi Compute Module. ArduCAM B0183
zł113.55
24h
Available quantity: 4
Available
Camera module with USB interface with a resolution of 2MP. Camera with Sony CMOS IMX291 sensor, the module is equipped with two microphones. ArduCAM B0201
zł267.66
24h
Available quantity: 1
Available
Camera with a resolution of 8 MPx with a USB interface. Equipped with a CMOS IMX219 sensor with a lens with a viewing angle of 60° and an autofocus function. ArduCAM B0292
zł178.88
24h
Available quantity: 6
Available
Kit with AR0234 2.3 MP camera, USB 2.0 adapter and USB cable. ArduCAM EK031
zł813.83
4 weeks
No product available!
Module with two GC0328 cameras designed to work with Sipeed MAix kits. The set has been designed for AI and stereo vision applications. Seeed Studio 114991702
zł96.83
24h
Available quantity: 2
Available
Camera module with USB interface. It is equipped with an IMX179 CMOS sensor with a resolution of 8 MP and a lens with a 63° viewing angle with autofocus function. It has a built-in digital microphone. ArduCAM B0447
zł295.79
24h
Available quantity: 2
Available
Mini camera module with IMX477 HQ sensor for NVIDIA Jetson Nano and Xavier NX. Equipped with a lens with an M12 mount with a viewing angle of 75°. ArduCAM B0251
zł305.03
24h
Available quantity: 9
Available
Camera module designed for NVIDIA Jetson Nano/Xavier NX. The camera is equipped with a Sony IMX477 sensor and focus controlled by the I2C interface. ArduCAM B0273
zł423.69
24h
Available quantity: 1
Available
The camera is equipped with an SC3336 sensor with a resolution of 3 megapixels (2304 x 1296 pixels). It is compatible with the Luckfox Pico module, which allows it to be easily integrated into various projects and applications. Waveshare SC3336 3MP Camera (B)
zł37.08
4 weeks
No product available!
Arducam USB shield is a module that allows you to connect some ArduCam cameras to a PC or minicomputers, eg Raspberry Pi, BeagleBone etc. The module supports most cameras with a serial interface that have a resolution of 0.3 ... 14 MPix. Attached to the module are appropriate libraries that facilitate image processing, eg using OpenCV software. ArduCam B0095