136RPM 12V N20W - miniature motor with angular gear
search
  • 136RPM 12V N20W - miniature motor with angular gear
ID: 582324
zł37.92
Tax included

zł30.83 tax excl.

Small metal gear motor, rotation speed 136 RPM, operating voltage 12 V. GA1218-N20W-0040

24h
Available
Available quantity: 13
 

Free shipping

free shipping in Poland for all orders over 500 PLN

 

Same day shipping

If your payment will be credited to our account by 11:00

 

14 days for return

Each consumer can return the purchased goods within 14 days

Description

A small motor with a metal gearing with a D-shaped shaft, 3 mm in diameter and approx. 10 mm long. The recommended operating voltage of the motor is 12 V and at this voltage it achieves a speed of 136 RPM and a maximum torque of 1.1 kg * cm, consuming a current from 0.055 A to 0.58 A.

Features

  • Motor type: medium power (MP)
  • Gear ratio: 150:1
  • Supply voltage: 9-15 V
  • Speed: 136 RPM
  • Maximum torque: 1,1 kg*cm
  • Minimum current consumption: 0,055 A
  • Maximum current consumption: 0,58 A
Attention!
Overloading the motor can destroy the gearbox or shorten its service life. It is recommended not to exceed the load and 1 kg * cm. Do not block the motor shaft as this may damage the gearbox. It is recommended to supply the motors with a current equal to or less than 25% of the specified maximum current.

Supply voltage

The recommended supply voltage for the motors is 12 V, but the motors operate without problems in the range from 9 V to 15 V. It is possible to supply the motor with higher voltage, but it reduces the service life of the motor.

Dimensions and weight

All N20W engines have the same dimensions. The metal gear housing has two tapped holes for M1.6 bolts (1.6mm diameter, 0.35mm pitch). The engines weigh approx. 15 g.

Dimensions of N20W micromotors (units in mm).

Types and parameters of N20W engines:

Our offer includes N20W engines with gear ratios from 50: 1 to 200: 1.

Gear ratio
Version Voltage Rotation speed max. torque min. current max. current Link
50:1 MP 12 V 381 RPM 0,4 kg*cm 55 mA 0,58 A LINK
150:1 MP 12 V 136 RPM 1,1 kg*cm 55 mA 0,58 A LINK
200:1 MP 12 V 68 RPM 1,5 kg*cm 55 mA 0,58 A LINK

Wheels

Our offer includes wheels suitable for motors with a shaft with a diameter of 3 mm and the shape of the letter "D". There are wheels of various diameters from 32 mm to 90 mm in many colors.

Pololu 32x7mm wheels (black) Pololu 32x7mm wheels (white) Pololu 40x7mm wheels (red)
A list of Pololu wheels with different diameters available in the following colors: white, blue, red, yellow and black

Motor controllers

It is not possible to control the motors directly from the microcontroller ports due to the high power consumption. This problem is solved by the motor drivers. Thanks to the controllers, it is possible not only to turn on and only the motors, but also to control their speed and direction of rotation.

Our offer includes a number of drivers for one or two motors. The drivers are available in the form of modules, shield extensions for Arduino and hat extensions for Raspberry Pi.

DC motor controller with DRV8838 Pololu system Shield Arduino with dual driver for DC motors with A4990 chip Dual driver for DC motors with the DRV8835 chip

Current sensors

Current sensors measure how much current the motors are consuming at a given moment, which allows to determine the load on the motors. Our offer includes sensors with measuring ranges from ± 5 to ± 75.

Current sensor module 0-5A with ACS712-05 chip Current sensor module ± 5A with ACS714 chip Current sensor module ± 15.5A with ACS711EX system
582324

Data sheet

DC motor power
MP
Gear material
Metal
Gear ratio
150:1
Rotation speed
136 RPM
Shaft diameter
3 mm
Shaft shape
D
Obustronny wał silnika
Nie
Power supply voltage
12V

Other products in the same category (14)

We use cookies and other tracking technologies to improve your browsing experience on our website, analyze our website traffic, and to understand where our visitors are coming from. By browsing our website, you consent to our Privacy Policy.