Ultrasonic ToF Material Detection Sensor - ToF material detection sensor
ID: 1186677
5902186311374
zł73.90
Tax included
zł60.08 tax excl.
Ultrasonic ToF sensor dedicated to the identification of materials at a distance of 2 to 10 cm. It can distinguish between hard and soft materials and transmits information via digital IO (high/low) or UART interface. DFRobot SEN0560
Description
An ultrasonic ToF sensor that uses the energy difference of the echo signal on different surfaces to identify materials. Characterized by very low power consumption, small size and light weight, it has been specially designed to identify materials at a distance of 2 to 10 cm. The sensor can distinguish between hard and soft materials, transmitting information via digital IO (high/low) or UART interface. It is compact and easy to install, mainly suitable for cleaning robots that identify the floor material and automatically adjust the cleaning method according to the recognized floor information. Full documentation is available on the product page.
Features
- Detection range: 2 to 10 cm
- Detection frequency: 100Hz
- Field of view angle: 45°
- Working temperature: -10 to 50℃
- EDS protection level: 15KV
- Protection level: IP54
- Communication mode: UART/IO
- Input voltage: 3.3V
- Current: 8mA
- Weight: 1g
Kit contains
- Ultrasonic Material Detection Sensor
- H1.5T-4P DuPont connector
1186677
Data sheet
- Interface
- UART
- Type of sensor
- ToF
- Minimum distance
- 2 cm
- Maximum distance
- 10 cm
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Ultrasonic distance sensor determines the distance to a target by measuring time lapses between the sending and receiving of the ultrasonic pulse. This ME007YS Waterproof Ultrasonic Sensor features high accuracy, steady data output and a certain penetration power(smog, dust). SEN0312
zł76.21
24h
Available quantity: 3
Available
Ultrasonic distance sensor module with a range of up to 4.5m enclosed in a waterproof and dustproof housing. It is compatible with 3.3V or 5V devices such as Arduino, Raspberry Pi DFRobot SEN0311
zł91.61
24h
Available quantity: 17
Available
Other products in the same category (16)
This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This low-brightness version draws an average of 8 mA at 5 V and has a typical sensing range up to approximately 12 inches (30 cm).
zł36.86
24h
Available quantity: 1
Available
Adafruit VL53L0X Time of Flight Distance Sensor is a laser distance sensor using the ToF (Time of Flight) measurement technique. The module is powered by 2.8 ... 5V voltage and can measure up to 1000mm. Adafruit 3317
zł97.12
24h
Available quantity: 1
Available
ToF distance sensor module based on the VL6180X system. It offers a range of up to 10 cm and communicates via the I2C interface. Adafruit 3316
zł82.82
24h
Available quantity: 1
Available
No product available!
Laser rangefinder with measuring range up to 22m. The current consumption is up to 200mA and the supply voltage 4.5 ... 6V. Communication via UART or CAN interface. DFRobot SEN0238
zł891.91
24h
Available quantity: 1
Available
Available
A multifunctional module with an optical sensor for measuring the intensity of illumination, the color of the incident RGB light, the distance from the object and the detection of 3D gestures. Adafruit 3595
zł39.10
24h
Available quantity: 2
Available
VL53L0X ToF Laser Range Finder is a laser distance sensor using the ToF (Time of Flight) measurement technique. The module is supplied with 3.3 ... 5 V voltage and can measure up to 2 m. DFRobot SEN0245
zł65.19
4 weeks
No product available!
Range finder with a measuring range up to 12m. The current consumption is up to 120mA and the supply voltage 4.5 ... 6V. Communication via the UART interface. DFRobot SEN0259
zł211.73
24h
Available quantity: 2
Available
Distance sensor module operating in TOF technology, operating range 4-400 cm, resolution up to 1 mm. Communication with the sensor via the I2C bus. Power supply through a built-in regulator with voltage from 2.6 to 5.5 V. Pololu 3415
zł119.58
24h
Available quantity: 8
Available
LIDAR-Lite v3HP is a laser rangefinder with a measuring range of 5 cm ... 40 m. Power consumption is a maximum of 85 mA. Supply voltage in the range 4.75 ... 5 V. Class 1 laser. I2C or PWM interface. SparkFun SEN-14599
zł816.88
3 weeks
No product available!
Distance Sensor Breakout VL53L1X is a distance sensor with a range of 4m and a supply voltage of 2.6 ... 3.5V. Communication with the sensor takes place via the I2C interface. SEN-14722
zł91.39
24h
Available quantity: 1
Available
Satellite board can be used for easy integration into customer devices and basic gesture detection applications.Thanks to its 2.8V regulator and level shifters, the VL53L0X satellite board can be used in any application with a 2.8 to 5V supply
zł103.00
24h
Available quantity: 1
Available
TF Mini LiDAR is a one-way rangefinder that is based on ToF (Time of Flight) technology. It consists of high quality optical and electrical devices that provide stability, high sensitivity and precision. Sparkfun SEN-14786
zł321.17
3 weeks
No product available!
Laser scanner (Lidar) 360 degrees with a measurement frequency of 10 Hz and 16,000 measurements / second. Range up to 25m, measuring error at 1%. Sparkfun SEN-15045
zł4,644.65
4 weeks
No product available!
Ultrasonic distance sensor (sonar) with a measuring range from 50 cm to 10 m. It allows you to read data through one of three interfaces: variable width pulse, analog output or UART TTL interface. DFRobot SEN0271
zł794.47
4 weeks
No product available!
Ultrasonic ToF sensor dedicated to the identification of materials at a distance of 2 to 10 cm. It can distinguish between hard and soft materials and transmits information via digital IO (high/low) or UART interface. DFRobot SEN0560