zł166.04 tax excl.
Low-power ESP32-S3 development board in a Feather-compatible format, designed for battery and solar-powered applications. Features 8MB Flash, 2MB PSRAM, Wi-Fi, Bluetooth 5 LE, advanced battery monitoring and support for LiFePO4, Li-ion and LiPo batteries. Elecrow ESP32-S3 PowerFeather V2
Development board Elecrow ESP32-S3 PowerFeather V2 is designed for low-power IoT devices, portable systems and solar-powered projects. It is based on the ESP32-S3 with a dual-core Xtensa LX7 processor operating at up to 240MHz, 8MB Flash memory, 2MB PSRAM and 512KB SRAM. Wireless connectivity includes 2.4GHz IEEE 802.11 b/g/n Wi-Fi and Bluetooth 5 LE with Mesh support.
V2 supports LiFePO4/LFP, Li-ion and LiPo batteries connected through a JST PH connector. The MAX17260 fuel gauge enables monitoring of battery voltage, temperature and current, as well as estimating state of charge, battery health, cycle count, time-to-empty and time-to-full. Charging, maximum charging current and selected power rails can be controlled through software. Current consumption drops to approximately 19–24µA in Deep Sleep mode and around 1µA in Ship or Shutdown mode.
The board can be powered from 5V USB-C or an external DC source up to 18V, including a directly connected solar panel. Adjustable MPP voltage enables more efficient use of solar power. Its Feather-compatible form factor supports FeatherWing modules, while the STEMMA QT connector provides an I2C interface. The board offers 23 I/O lines, USB OTG, user and reset buttons and an onboard PCB antenna. Dimensions are 65 × 23 × 7mm.
Manufacturer
Responsible person
Development board based on the ESP32-P4NRW32X microcontroller, featuring a dual-core RISC-V processor running at up to 400MHz and an additional low-power core operating at up to 40MHz. Equipped with 32MB PSRAM, 32MB NOR Flash, MIPI-CSI and MIPI-DSI interfaces, USB 2.0 OTG High Speed, and GPIO expansion headers. Supports hardware image processing and H.264 encoding. Supplied with two factory-soldered 20-pin headers. Waveshare ESP32-P4-Core-DEV-KIT-M
No product available!
Development board based on the ESP32-P4NRW32X microcontroller, featuring a dual-core RISC-V processor running at up to 400MHz and an additional low-power core operating at up to 40MHz. Equipped with 32MB PSRAM, 32MB NOR Flash, MIPI-CSI and MIPI-DSI interfaces, USB 2.0 OTG High Speed, and GPIO expansion connections. Supports hardware image processing and H.264 encoding. Supplied without pre-soldered headers, with two separate 20-pin headers included. Waveshare ESP32-P4-Core-DEV-KIT
No product available!
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and capacitive touch panel. Supports Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4 and integrates a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot and USB-C. EN variant. Waveshare ESP32-C6-Touch-LCD-1.54-EN
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and capacitive touch panel. Supports Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4 and integrates a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot and USB-C. Variant supplied with a 3.7V battery. Waveshare ESP32-C6-Touch-LCD-1.54
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and support for Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4. Features a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot, USB-C and 3.7V battery interface; non-touch EN variant. Waveshare ESP32-C6-LCD-1.54-EN
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and support for Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4. Features a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot, USB-C and 3.7V battery support; non-touch version supplied with a 1000mAh battery. Waveshare ESP32-C6-LCD-1.54
Development board based on the ESP32-C3FH4 with a 1.47-inch 172 × 320px LCD, 2.4GHz Wi-Fi, Bluetooth 5 LE and a QMI8658 6-axis IMU. Version with factory pre-soldered black pin headers, also featuring a TF card slot, USB-C and 15 broken-out GPIOs. Waveshare ESP32-C3-LCD-1.47-M
Development board based on the ESP32-C3FH4 with a 1.47-inch IPS LCD featuring 172 × 320px resolution, 2.4GHz Wi-Fi, Bluetooth 5 LE and a QMI8658 6-axis IMU. Standard version supplied with separate unsoldered pin headers and also equipped with a TF card slot, USB-C and 15 broken-out GPIOs. Waveshare ESP32-C3-LCD-1.47
ESP32-S3R8 development board with a 1.85-inch 360 × 360px LCD capacitive touch display and a CNC-machined aluminum alloy enclosure. Features 2.4GHz Wi-Fi, Bluetooth 5 LE, 8MB PSRAM, 16MB Flash, QMI8658 6-axis IMU, dual microphones, audio circuitry with an output for connecting a speaker and a USB-C interface. Waveshare ESP32-S3-Touch-LCD-1.85B-EN
Compact communication platform based on a dual-core ESP32-S3 processor, designed for building LoRa Mesh networks, IoT projects, and embedded systems. The device features a 1.14" LCD display, a 56-key keyboard, and advanced audio capabilities with a microphone, speaker, and 3.5 mm audio output. The design is fully based on the Cardputer-Adv platform and extends its functionality with the Cap LoRa-1262 module, adding LoRa communication and GNSS positioning with support for GPS, BeiDou, Galileo, and GLONASS. A built-in accelerometer, infrared transmitter, microSD card slot, and Grove interfaces allow easy expansion and sensor integration, while the 1750 mAh Li-ion battery provides mobility and extended operating time. M5Stack K152
ESP32-S3-based development platform featuring a 1.75" round AMOLED display, audio subsystem, IMU sensor, WiFi connectivity, and a rechargeable battery for portable IoT devices. M5Stack C152
No product available!
ESP32-S3-based development platform featuring a 4-inch full-color E Ink Spectra 6 display, audio subsystem, temperature and humidity sensor, microSD card slot, and rechargeable battery for low-power IoT devices and data display applications. M5Stack C151
Portable development device based on the ESP32-S3 microcontroller combines an SX1262 868 MHz LoRa transceiver, a 2.8" IPS color display, a full QWERTY keyboard, and a trackball controller in a compact enclosure. Factory-installed LILYGO Factory Firmware allows immediate use without manually flashing the base firmware. The package includes an 868 MHz LoRa FPC antenna, a power cable, and a 1×6 pin header. The device is designed for LoRa communication terminals, portable messaging devices, IoT projects, and custom applications based on the ESP32-S3 microcontroller. LILYGO TTGO T-Deck 868 MHz Black LILYGO Factory Firmware
No product available!
A development board based on the ESP32 microcontroller that combines an SX1278 LoRa transceiver, a 0.96" OLED display, and a microSD card slot in a single compact design. Preloaded with Disaster-Radio firmware, it supports Wi-Fi, Bluetooth 4.2, and 433 MHz LoRa communication. The kit includes a 433 MHz LoRa antenna, a JST 2-pin power cable, and pin headers for soldering. The board is designed for autonomous communication devices, mesh network nodes, and IoT applications. LILYGO TTGO T3 LoRa32 V1.6.1 Disaster-Radio 433 MHz
No product available!
An ESP32-based development board that combines a LoRa communication module, NEO-6M GPS receiver, and a 0.96" OLED display in a single device. Preloaded with Meshtastic firmware, it supports Wi-Fi, Bluetooth 4.2, and 433 MHz LoRa communication. The kit includes a non-soldered 0.96" OLED display, a 433 MHz LoRa antenna, and pin headers for self-assembly. The board is suitable for building autonomous mesh network nodes, GPS trackers, and battery-powered IoT devices using a 18650 Li-Ion cell or a microUSB power supply. LILYGO TTGO T-Beam Meshtastic 433 MHz Non-Soldered OLED
The LILYGO TTGO T-Dongle S3 With LCD [K193] is an ESP32-S3 development board combining the functionality of a powerful microcontroller with the compact form factor of a USB dongle. It features a 0.96-inch ST7735 IPS color display, 16 MB Flash memory, 2.4 GHz Wi-Fi and Bluetooth 5 connectivity. Compatible with Arduino IDE, PlatformIO, and MicroPython, the module provides a convenient platform for developing IoT devices, portable USB tools, information displays, and embedded applications. LILYGO TTGO T-Dongle S3 With LCD [K193]
No product available!
Low-power ESP32-S3 development board in a Feather-compatible format, designed for battery and solar-powered applications. Features 8MB Flash, 2MB PSRAM, Wi-Fi, Bluetooth 5 LE, advanced battery monitoring and support for LiFePO4, Li-ion and LiPo batteries. Elecrow ESP32-S3 PowerFeather V2