KAmodRPi-GPRS-GPS - GSM / BT transmission overlay for Raspberry Pi

Set with SIMCom 5G SIM8262E-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. Waveshare SIM8262E-M2 5G HAT

Expansion Shield X300 with RTC real time clock; audio input and output; USB hub; Bluletooth, WIFI; SATA interface. Compatible with Raspberry Pi Model B+, Pi 2 Model B and Pi 3 Model B

The module from SIM7080G is designed for NB-IoT and Cat-M communications. It also enables the use of GNSS systems for positioning. Waveshare SIM7080G Cat-M/NB-IoT HAT (EN)

The set with the RM500Q-GL module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM500Q-GL 5G HAT (with case) (EU)

Set with the SIMCom 4G module SIM7600G-H designed to work with the Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H-M2 4G HAT

HAT module designed for Raspberry Pi minicomputer. Powala adds two RS485 interfaces and one CAN bus to the project. Waveshare RS485 CAN HAT (B)

Modern SSDs are most commonly equipped with a high-speed NVMe interface, implemented through an NGFF connector with an M-key, known as M.2 M-key. The KAmod USB-PCIE-M2 adapter allows you to connect an M.2 M-key SSD to a computer via a USB port.

The PCIE TO M.2 E KEY HAT+ Acce A kit enables the expansion of Raspberry Pi 5 with a fast and modern network interface based on the Intel Wireless-AX210 module, supporting Wi-Fi 6E and Bluetooth 5.3. Thanks to the HAT+ standard, two SMA antenna connectors, and the ability to transmit Bluetooth signals via USB, the adapter is suitable for communication projects, home servers, and IoT systems requiring high-performance wireless connectivity.

The KAmodRPi UART RS485 ISO is an advanced RS485 bus transceiver for the Raspberry Pi, featuring automatic transmission direction control, galvanic isolation, surge protection, and support for up to 128 modules at a transmission speed of up to 500 kbps, powered by 5V with low power consumption

The EM060K-GL LTE Cat-6 module kit is designed for use with the Raspberry Pi minicomputer. It supports communication over the high-speed LTE-A network and GNSS positioning. Waveshare EM060K-GL LTE Cat-6 HAT

PCIe TO USB 3.2 Gen1 Board (C) is a functional expansion for the Raspberry Pi 5, enabling the connection of four high-speed USB devices with independent power management. It is ideal for applications requiring multiple ports, such as laboratories, workstations, or automated systems, where stability, performance, and full control over peripheral devices are essential.

Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare SX1262 868/915M LoRaWAN HAT

Expansion board with GSM/GPRS module designed for Arduino and Raspberry Pi. It uses the Quectel M95 chip, the board has two audio connectors, a microSD slot and a dual SIM slot. A-GSM II Shield

Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 433/470M LoRaWAN/GNSS HAT

The PCIe TO 2-CH M.2 HAT+ expands the functionality of the Raspberry Pi 5 by enabling the installation of two NVMe SSDs, offering significantly improved read/write performance and the option to boot from disk. With its compact design, support for 2230/2242 form factors, and built-in power monitoring, the adapter is well-suited for server solutions, NAS projects, multimedia systems, and advanced industrial applications.

Set with SIMCom 5G SIM8262E-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. Waveshare SIM8262E-M2 5G HAT (with case)