zł8.91
Grove Voltage Divider
ID: 566572
zł32.71
Tax included
zł26.59 tax excl.
Module with a voltage divider. Equipped with a Grove connector, it allows the input voltage to be reduced by 3 or 10 times. Seeed Studio 104020000
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Module with a voltage divider. It is equipped with a Grove connector and enables a 3-fold or 10-fold reduction of the input voltage (selection with a switch). It allows you to connect to Arduino kits and measure voltages up to 43 V. Full documentation of the module with examples of use is available on the product page.
Features
- Interface: analog
- Input voltage:
- Divider 3: 0.3 to 12.9 V
- Divisor 10: from 1 to 43 V
- The ratio of the output voltage to the input voltage: 1:3, 1:10
- Accuracy: 1%
Kit contains
- Grove Voltage Divider module
- Grove cable
566572
Data sheet
- Number of channels
- 1
- Voltage on page A
- 5 V
- Voltage on side B
- 43 V
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł113.90
24h
Available quantity: 66
Available
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
zł209.00
24h
Available quantity: 68
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 20
Available
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł54.85
24h
Available quantity: 2
Available
Other products in the same category (16)
Waterproof strip with RGB LED diodes, 1 m long (30 LEDs per meter). The LEDs are mounted on a flexible white PCB, the tape has a Grove connector. Seeed Studio 104020108
zł39.70
6 weeks
No product available!
Starter kit with Grove modules designed to work with the Azure Sphere MT3620 development board. Seeed Studio 110060947
zł277.81
6 weeks
No product available!
Module with a slide potentiometer. Depending on the position of the slider, the resistance value (maximum resistance 10kΩ) changes, which translates into the voltage value at the analog output of the module. The module has a connector in accordance with the Grove standard. Seeed studio 101020036
zł35.36
24h
Available quantity: 2
Available
MIX8410 oxygen concentration sensor module. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101990680
zł327.65
24h
Available quantity: 1
Available
Module with humidity and air temperature sensor based on the AM2302 system. It allows temperature measurement in the range from -40 to 80 ° C and the humidity measurement takes place in the range of 5 to 99% RH. The module has a connector in accordance with the Grove standard. Seeed Studio 101020019
zł62.32
24h
Available quantity: 5
Available
Module with RGB diode and P9813 controller. It is powered with the voltage of 5 V and controlled by the I2C interface (Grove). Seeed Studio 104030006
zł21.65
24h
Available quantity: 4
Available
Module with rotary potentiometer. The connector in this module has been moved to the other side of the PCB, which makes it easier to assemble and use this module. The module has a connector in accordance with the Grove standard. Seeed studio 101020048
zł35.28
24h
Available quantity: 3
Available
Module with an EMG signal detector. The board is equipped with a Grove connector and has an analog output. Seeed Studio 101020058
zł224.11
6 weeks
No product available!
Module with a sensor of formaldehyde (methanal) concentration in the air. The board is equipped with a Grove connector and communicates via the I2C or UART interface. Seeed Studio 101020972
zł356.05
Delivery date unknown
No product available!
Module with liquid turbidity sensor. The board is equipped with a Grove connector and communicates via a digital or analog interface. Seeed Studio 101020752
zł133.75
24h
Available quantity: 3
Available
Module with a button and red LED backlight. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020044
zł13.68
24h
Available quantity: 2
Available
Module with 10 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020131
zł29.98
24h
Available quantity: 2
Available
Yellow mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070021
zł11.54
24h
Available quantity: 3
Available
A volume sensor designed to detect loud ambient sounds. The module uses a microphone and LM2904 amplifier. The output value (analog signal) depends on the volume of the detected sound. In order to eliminate interference, the microphone signal is subjected to double filtering. Seeed studio 101020063
zł37.11
24h
Available quantity: 2
Available
Module with 42 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020173
zł120.42
24h
Available quantity: 2
Available
A set of necessary tools needed to perform vehicle diagnostics. It consists of a CAN Bus module, an OBD II connector and the necessary wires. Seeed Studio 114991438
zł116.83
6 weeks
No product available!
Module with a voltage divider. Equipped with a Grove connector, it allows the input voltage to be reduced by 3 or 10 times. Seeed Studio 104020000